Bulletins | CERT@VDE

SSA-398519 V1.5 (Last Update: 2021-02-09): Vulnerabilities in Intel CPUs (November 2019)

Titel

SSA-398519 V1.5 (Last Update: 2021-02-09): Vulnerabilities in Intel CPUs (November 2019)

Veröffentlicht

9. Februar 2021 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-398519.pdf

Text

Intel has published information on vulnerabilities in Intel products in November 2019. In this advisory Siemens only explicitly mentions the vulnerabilities from the “Intel® CPU Security Advisory” and one vulnerability from “Intel® CSME, Intel® SPS, Intel® TXE, Intel® AMT, Intel® PTT and Intel® DAL Advisory” and lists the Siemens IPC ...

SSA-349422 V1.5 (Last Update: 2021-02-09): Denial-of-Service in Industrial Real-Time (IRT) Devices

Titel

SSA-349422 V1.5 (Last Update: 2021-02-09): Denial-of-Service in Industrial Real-Time (IRT) Devices

Veröffentlicht

9. Februar 2021 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-349422.pdf

Text

A vulnerability in the affected products could allow an unauthorized attacker with network access to perform a denial-of-service attack resulting in loss of real-time synchronization. Siemens has released updates for several affected products and recommends to update to the latest versions. Siemens is preparing further updates and recommends specific countermeasures ...

SSA-274900 V1.1 (Last Update: 2021-02-09): Use of hardcoded key in Scalance X devices under certain conditions

Titel

SSA-274900 V1.1 (Last Update: 2021-02-09): Use of hardcoded key in Scalance X devices under certain conditions

Veröffentlicht

9. Februar 2021 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-274900.pdf

Text

Scalance X devices might not generate a unique random key after factory reset, and use a private key shipped with the firmware Siemens has released updates for several affected products and recommends to update to the latest versions. Siemens is preparing further updates and recommends specific countermeasures for products where ...

SSA-139628 V1.1 (Last Update: 2021-02-09): Vulnerabilities in Web Server for Scalance X Products

Titel

SSA-139628 V1.1 (Last Update: 2021-02-09): Vulnerabilities in Web Server for Scalance X Products

Veröffentlicht

9. Februar 2021 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-139628.pdf

Text

Several SCALANCE X switches contain vulnerabilities in the web server of the affected devices. An unauthenticated attacker could reboot, cause denial-of-service conditions and potentially impact the system by other means through heap and buffer overflow vulnerabilities. Siemens has released updates for several affected products and recommends to update to the ...

SSA-102233 V1.5 (Last Update: 2021-02-09): SegmentSmack in VxWorks-based Industrial Devices

Titel

SSA-102233 V1.5 (Last Update: 2021-02-09): SegmentSmack in VxWorks-based Industrial Devices

Veröffentlicht

9. Februar 2021 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-102233.pdf

Text

The products listed below contain a vulnerability that could allow remote attackers to affect the availability of the devices under certain conditions. The underlying TCP stack can be forced to make very computation expensive calls for every incoming packet which can lead to a Denial-of-Service. Siemens has released an update ...

SSA-100232 V1.2 (Last Update: 2021-02-09): Denial-of-Service vulnerability in SCALANCE X Switches

Titel

SSA-100232 V1.2 (Last Update: 2021-02-09): Denial-of-Service vulnerability in SCALANCE X Switches

Veröffentlicht

9. Februar 2021 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-100232.pdf

Text

A vulnerability in several SCALANCE X devices could allow an unauthenticated attacker with network access to an affected device to perform a denial-of-service. Siemens has released an update for SCALANCE X-200IRT and recommends to update to the latest version. Siemens recommends specific countermeasures for products where updates are not, or ...

SSA-944678 V1.0: Potential Password Protection Bypass in SIMATIC WinCC

Titel

SSA-944678 V1.0: Potential Password Protection Bypass in SIMATIC WinCC

Veröffentlicht

9. Februar 2021 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-944678.pdf

Text

A vulnerability in the SIMATIC WinCC Graphics Designer tool could allow an attacker that has physical access to a machine running the software to get access to the user’s private password-protected pictures. Siemens has released an update for SIMATIC WinCC and recommends to update to the latest version. Siemens recommends ...

SSA-794542 V1.0: Insecure Folder Permissions in SIMARIS configuration

Titel

SSA-794542 V1.0: Insecure Folder Permissions in SIMARIS configuration

Veröffentlicht

9. Februar 2021 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-794542.pdf

Text

The installation of SIMARIS configuration causes insecure folder permissions that could allow vertical privilege escalation. Siemens is preparing updates and recommends specific countermeasures until fixes are available.

SSA-686152 V1.0: Denial-of-Service Vulnerability in ARP Protocol of SCALANCE W780 and W740

Titel

SSA-686152 V1.0: Denial-of-Service Vulnerability in ARP Protocol of SCALANCE W780 and W740

Veröffentlicht

9. Februar 2021 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-686152.pdf

Text

A Denial-of-Service vulnerability was found affecting the ARP protocol on older firmware versions of the SCALANCE W780 and W740 (IEEE 802.11n) devices. Siemens recommends to update to the latest version.

SSA-663999 V1.0: Multiple File Parsing Vulnerabilities in JT2Go and Teamcenter Visualization before V13.1.0.1

Titel

SSA-663999 V1.0: Multiple File Parsing Vulnerabilities in JT2Go and Teamcenter Visualization before V13.1.0.1

Veröffentlicht

9. Februar 2021 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-663999.pdf

Text

Siemens has released version V13.1.0.1 for JT2Go and Teamcenter Visualization to fix multiple vulnerabilities that could be triggered when the products read files in different file formats (PAR, BMP, TIFF, CGM, TGA, PCT, HPG, PLT, RAS, ASM, DGN, DXF, DWG). If a user is tricked to opening of a malicious ...

SSA-536315 V1.0: Privilege escalation vulnerability in DIGSI 4

Titel

SSA-536315 V1.0: Privilege escalation vulnerability in DIGSI 4

Veröffentlicht

9. Februar 2021 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-536315.pdf

Text

A vertical privilege escalation vulnerability exists in DIGSI 4. Siemens has released an update for DIGSI 4 and recommends to update to the latest version.

Januar 2021

28.01.2021

SSA-520004 V1.0: Telnet Authentication Vulnerability in SIMATIC HMI Comfort Panels

Titel

SSA-520004 V1.0: Telnet Authentication Vulnerability in SIMATIC HMI Comfort Panels

Veröffentlicht

28. Januar 2021 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-520004.pdf

Text

SIMATIC HMI Panels are affected by a vulnerability that could allow a remote attacker to gain full access to the device(s), if the telnet service is enabled. Siemens has released updates for the affected products and recommends to update to the latest versions.

27.01.2021

BOSCH PSIRT

Denial of Service in Rexroth ID 200/C-ETH using EtherNet/IP Protocol

Titel

Denial of Service in Rexroth ID 200/C-ETH using EtherNet/IP Protocol

Veröffentlicht

27. Januar 2021 01:00

URL

https://psirt.bosch.com/security-advisories/bosch-sa-775371.html

Text

BOSCH-SA-775371: The ID 200/C-ETH (Rexroth No. 3842 410 060) sold by Bosch Rexroth contains communication technology (499ES EtherNet/IP) from Real Time Automation (RTA) in which a critical vulnerability has been discovered. By exploiting the vulnerability an attacker can send a specially crafted packet that may result in a denial-of-service condition ...

21.01.2021

BOSCH PSIRT

Two Vulnerabilities in Bosch Fire Monitoring System (FSM)

Titel

Two Vulnerabilities in Bosch Fire Monitoring System (FSM)

Veröffentlicht

21. Januar 2021 01:00

URL

https://psirt.bosch.com/security-advisories/bosch-sa-332072-bt.html

Text

BOSCH-SA-332072-BT: Two vulnerabilties have been discovered affecting the Bosch Fire Monitoring System (FSM-2500 and FSM-5000). The critical issue applies to FSM systems with versions 5.2 and lower. Bosch rates these vulnerabilities with a CVSS v3.1 Base Score of 4.4 and 10.0 (medium and critical) and strongly recommends customers to update ...

19.01.2021

SSA-646763 V1.0: DNSpooq - Dnsmasq Vulnerabilities in SCALANCE and RUGGEDCOM Devices

Titel

SSA-646763 V1.0: DNSpooq - Dnsmasq Vulnerabilities in SCALANCE and RUGGEDCOM Devices

Veröffentlicht

19. Januar 2021 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-646763.pdf

Text

Security researchers discovered and disclosed seven vulnerabilities in the open-source DNS component “dnsmasq”, also known as “DNSpooq” vulnerabilities (CVE-2020-25681 through CVE-2020-25687). Three vulnerabilities (CVE-2020-25684 through CVE-2020-25686) affect the validation of DNS responses and impact several SCALANCE and RUGGEDCOM devices as listed below. Siemens is preparing updates and recommends countermeasures for ...

15.01.2021

SSA-979834 V1.1 (Last Update: 2021-01-15): Multiple vulnerabilities in Solid Edge

Titel

SSA-979834 V1.1 (Last Update: 2021-01-15): Multiple vulnerabilities in Solid Edge

Veröffentlicht

15. Januar 2021 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-979834.pdf

Text

Solid Edge is affected by multiple vulnerabilities that could allow arbitrary code execution on an affected system. Siemens has released an update for Solid Edge and recommends to update to the latest version.

SOOIL Dana Diabecare RS Products

Titel

SOOIL Dana Diabecare RS Products

Veröffentlicht

12. Januar 2021 17:00

URL

https://us-cert.cisa.gov/ics/advisories/icsma-21-012-01

Text

This advisory contains mitigations for Use of Hard Coded Credentials, Insufficiently Protected Credentials, Use of Insufficiently Random Values, Use of Client-side Authentication, Client-side Enforcement of Server-side Security, Authentication Bypass by Capture-Replay, Unprotected Transport of Credentials, Key Exchange Without Entity Authentication, and Authentication Bypass by Spoofing vulnerabilities in SOOIL Dana Diabecare ...

Schneider Electric EcoStruxure Power Build-Rapsody

Titel

Schneider Electric EcoStruxure Power Build-Rapsody

Veröffentlicht

12. Januar 2021 16:55

URL

https://us-cert.cisa.gov/ics/advisories/icsa-21-012-01

Text

This advisory contains mitigations for an Unrestricted Upload of File with Dangerous Type vulnerability in the Schneider Electric EcoStruxure Power Build-Rapsody software.

Siemens JT2Go and Teamcenter Visualization

Titel

Siemens JT2Go and Teamcenter Visualization

Veröffentlicht

12. Januar 2021 16:45

URL

https://us-cert.cisa.gov/ics/advisories/icsa-21-012-03

Text

This advisory contains mitigations for a Type Confusion, Improper Restriction of XML External Entity Reference, Out-of-bounds Write, Heap-based Buffer Overflow, Stack-based Buffer Overflow, Untrusted Pointer Dereference, and Out-of-bounds Read vulnerabilities in Siemens JT2Go and Teamcenter Visualization software products.

https://us-cert.cisa.gov/ics/advisories/icsa-21-012-04

Siemens Solid Edge

Titel

Siemens Solid Edge

Veröffentlicht

12. Januar 2021 16:40

URL

Text

This advisory contains mitigations for Out-of-bounds Write, and Stack-based Buffer Overflow vulnerabilities in Siemens Solid Edge software tools.

Siemens SCALANCE X Products

Titel

Siemens SCALANCE X Products

Veröffentlicht

12. Januar 2021 16:35

URL

https://us-cert.cisa.gov/ics/advisories/icsa-21-012-05

Text

This advisory contains mitigations for Missing Authentication for Critical Function, and Heap-based Buffer Overflow vulnerabilities in Siemens SCALANCE X switches.

Siemens Opcenter Execution Core (Update B)

Titel

Siemens Opcenter Execution Core (Update B)

Veröffentlicht

12. Januar 2021 16:30

URL

https://us-cert.cisa.gov/ics/advisories/icsa-20-196-07

Text

This updated advisory is a follow-up to the original advisory titled ICSA-20-196-07 Siemens Opcenter Execution Core (Update A) that was published August 11, 2020, to the ICS webpage on us-cert.cisa.gov. This advisory contains mitigations for Cross-site Scripting, SQL Injection, and Improper Access Control vulnerabilities in Siemens Opcenter Execution Core software.

Siemens SIMATIC, SINAMICS, SINEC, SINEMA, SINUMERIK (Update E)

Titel

Siemens SIMATIC, SINAMICS, SINEC, SINEMA, SINUMERIK (Update E)

Veröffentlicht

12. Januar 2021 16:25

URL

https://us-cert.cisa.gov/ics/advisories/icsa-20-161-04

Text

This updated advisory is a follow-up to the advisory update titled ICSA-20-161-04 Siemens SIMATIC, SINAMICS, SINEC, SINEMA, SINUMERIK (Update D) that was published December 8, 2020, to the ICS webpage on us-cert.cisa.gov. This advisory contains mitigations for an Unquoted Search Path or Element vulnerability in Siemens SIMATIC, SINAMICS, SINEC, SINEMA, ...

Siemens SIMOTICS, Desigo, APOGEE, and TALON (Update A)

Titel

Siemens SIMOTICS, Desigo, APOGEE, and TALON (Update A)

Veröffentlicht

12. Januar 2021 16:20

URL

https://us-cert.cisa.gov/ics/advisories/icsa-20-105-06

Text

This updated advisory is a follow-up to the original advisory titled ICSA-20-105-06 Siemens SIMOTICS, Desigo, APOGEE, and TALON that was published April 14, 2020, to the ICS webpage on us-cert.cisa.gov. This advisory contains mitigations for a business logic errors vulnerability in Siemens SIMOTICS, Desigo, APOGEE, and TALON products.