Bulletins | CERT@VDE

Medtronic MyCareLink Patient Monitor

Titel

Medtronic MyCareLink Patient Monitor

Veröffentlicht

28. Juni 2018 16:00

URL

https://ics-cert.us-cert.gov/advisories/ICSMA-18-179-01

Text

This advisory includes mitigation recommendations for hard-coded password and exposed dangerous method or function vulnerabilities reported in Medtronic's MyCareLink Patient Monitors.

Dienstag, 26.06.2018

SSA-755010 (Last Update: 2018-06-26): Vulnerability in RAPIDLab 1200 and RAPIDPoint 400/500 Blood Gas Analyzers

Titel

SSA-755010 (Last Update: 2018-06-26): Vulnerability in RAPIDLab 1200 and RAPIDPoint 400/500 Blood Gas Analyzers

Veröffentlicht

26. Juni 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-755010.pdf

Text

Siemens Healthineers has become aware of two potential cybersecurity vulnerabilities for the RAPIDLab® 1200 Series and RAPIDPoint® 400/405/500 Blood Gas Analyzers and recommends specific countermeasures to mitigate the risk. At the time of advisory publication, no public exploitation of this security vulnerability is known.

SSA-168644 (Last Update: 2018-06-26): Spectre and Meltdown Vulnerabilities in Industrial Products

Titel

SSA-168644 (Last Update: 2018-06-26): Spectre and Meltdown Vulnerabilities in Industrial Products

Veröffentlicht

26. Juni 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-168644.pdf

Text

Security researchers published information on vulnerabilities known as Spectre and Meltdown. These vulnerabilities affect many modern processors from different vendors to a varying degree. Several Industrial Products include affected processors and are affected by the vulnerabilities.

SSA-159860 (Last Update: 2018-06-26): Access Control Vulnerability in IEC 61850 system configurator, DIGSI 5, DIGSI 4, SICAM PA...

Titel

SSA-159860 (Last Update: 2018-06-26): Access Control Vulnerability in IEC 61850 system configurator, DIGSI 5, DIGSI 4, SICAM PAS/PQS, SICAM PQ Analyzer, and SICAM SCC

Veröffentlicht

26. Juni 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-159860.pdf

Text

IEC 61850 system configurator, DIGSI 5, DIGSI 4, SICAM PAS/PQS, SICAM PQ Analyzer, and SICAM SCC products are affected by a security vulnerability which could allow an attacker to either exfiltrate limited data from the system or to execute code with operating system user permissions. Siemens has released updates for ...

Donnerstag, 21.06.2018

16:00

Delta Electronics Delta Industrial Automation COMMGR

Titel

Delta Electronics Delta Industrial Automation COMMGR

Veröffentlicht

21. Juni 2018 16:00

URL

https://ics-cert.us-cert.gov/advisories/ICSA-18-172-01

Text

This advisory includes mitigations for a stack-based buffer overflow vulnerability in the Delta Electronics Delta Industrial Automation COMMGR software.

15:55

Rockwell Automation Allen-Bradley CompactLogix and Compact GuardLogix (Update A)

Titel

Rockwell Automation Allen-Bradley CompactLogix and Compact GuardLogix (Update A)

Veröffentlicht

21. Juni 2018 15:55

URL

https://ics-cert.us-cert.gov/advisories/ICSA-18-172-02

Text

This updated advisory is a follow-up to the original advisory titled ICSA-18-172-02 Rockwell Automation Allen-Bradley CompactLogix and Compact GuardLogix that was published June 21, 2018, on the NCCIC/ICS-CERT website. This updated advisory includes mitigation recommendations for an improper input validation vulnerability reported in Rockwell Automation Allen-Bradley CompactLogix and Compact GuardLogix ...

15:55

Rockwell Automation Allen-Bradley CompactLogix and Compact GuardLogix

Titel

Rockwell Automation Allen-Bradley CompactLogix and Compact GuardLogix

Veröffentlicht

21. Juni 2018 15:55

URL

https://ics-cert.us-cert.gov/advisories/ICSA-18-172-02

Text

This advisory includes mitigation recommendations for an improper input validation vulnerability reported in Rockwell Automation Allen-Bradley CompactLogix and Compact GuardLogix controllers.

Dienstag, 19.06.2018

SSA-966341 (Last Update: 2018-06-19): SMBv1 Vulnerabilities in Molecular Diagnostics Products from Siemens Healthineers

Titel

SSA-966341 (Last Update: 2018-06-19): SMBv1 Vulnerabilities in Molecular Diagnostics Products from Siemens Healthineers

Veröffentlicht

19. Juni 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-966341.pdf

Text

Select Molecular Diagnostics products from Siemens Healthineers are affected by the Microsoft Windows SMBv1 vulnerabilities. The exploitability of the vulnerabilities depends on the actual configuration and deployment environment of each product. Siemens Healthineers has developed solutions for all affected products which are available via customer support. Siemens Healthineers also provides ...

Donnerstag, 14.06.2018

18:05

Natus Xltek NeuroWorks

Titel

Natus Xltek NeuroWorks

Veröffentlicht

14. Juni 2018 18:05

URL

https://ics-cert.us-cert.gov/advisories/ICSMA-18-165-01

Text

This medical device advisory includes mitigations for stack-based buffer overflow and out-of-bounds read vulnerabilities in the Natus Xltek NeuroWorks software.

16:10

Siemens SCALANCE X Switches, RUGGEDCOM WiMAX, RFID 181-EIP, and SIMATIC RF182C

Titel

Siemens SCALANCE X Switches, RUGGEDCOM WiMAX, RFID 181-EIP, and SIMATIC RF182C

Veröffentlicht

14. Juni 2018 16:10

URL

https://ics-cert.us-cert.gov/advisories/ICSA-18-165-01

Text

This advisory includes mitigation recommendations for a permissions, privileges, and access controls vulnerability reported in Siemens SCALANCE X switches, RUGGEDCOM WiMAX, RFID 181-EIP, and SIMATIC RF182C.

Dienstag, 12.06.2018

20:31

Schneider Electric U.motion Builder

Titel

Schneider Electric U.motion Builder

Veröffentlicht

12. Juni 2018 20:31

URL

https://ics-cert.us-cert.gov/advisories/ICSA-18-163-01

Text

This advisory includes mitigations for a command injection, cross-site scripting, and improper input validation vulnerabilities in the Schneider Electric U.motion Builder software.

17:28

Siemens SCALANCE X Switches

Titel

Siemens SCALANCE X Switches

Veröffentlicht

12. Juni 2018 17:28

URL

https://ics-cert.us-cert.gov/advisories/ICSA-18-163-02

Text

This advisory includes mitigation recommendations for a cross-site scripting vulnerability reported in Siemens SCALANCE X switches.

SSA-181018 (Last Update: 2018-06-12): Heap Overflow Vulnerability in SCALANCE X switches, RUGGEDCOM WiMAX, RFID 181-EIP, and SI...

Titel

SSA-181018 (Last Update: 2018-06-12): Heap Overflow Vulnerability in SCALANCE X switches, RUGGEDCOM WiMAX, RFID 181-EIP, and SIMATIC RF182C

Veröffentlicht

12. Juni 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-181018.pdf

Text

SCALANCE X switches, RUGGEDCOM WiMAX, RFID 181-EIP, and SIMATIC RF182C are affected by a vulnerability that could allow an unprivileged attacker located in the same local network segment (OSI Layer 2) to gain system privileges by sending a specially crafted DHCP response to a client's DHCP request. Siemens has released ...

SSA-348629 (Last Update: 2018-06-12): Denial-of-Service Vulnerability in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Pr...

Titel

SSA-348629 (Last Update: 2018-06-12): Denial-of-Service Vulnerability in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Professional and SIMATIC NET PC Software

Veröffentlicht

12. Juni 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-348629.pdf

Text

A Denial-of-Service vulnerability has been identified in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Professional and SIMATIC NET PC-Software. Siemens has released updates for several affected products and recommends that customers update to the new version. Siemens is preparing further updates and recommends specific countermeasures until patches are available.

SSA-323211 (Last Update: 2018-06-12): Vulnerabilities in SIPROTEC 4 and SIPROTEC Compact Devices

Titel

SSA-323211 (Last Update: 2018-06-12): Vulnerabilities in SIPROTEC 4 and SIPROTEC Compact Devices

Veröffentlicht

12. Juni 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-323211.pdf

Text

SIPROTEC 4 and SIPROTEC Compact devices are affected by several vulnerabilities. Two of the vulnerabilities could allow attackers to perform a denial-of-service attack under certain conditions. Siemens has released updates for the affected products and will update this advisory when new information becomes available.

SSA-275839 (Last Update: 2018-06-12): Denial-of-Service Vulnerability in Industrial Products

Titel

SSA-275839 (Last Update: 2018-06-12): Denial-of-Service Vulnerability in Industrial Products

Veröffentlicht

12. Juni 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-275839.pdf

Text

Several industrial products are affected by a vulnerability that could allow an attacker to cause a Denial-of-Service condition via PROFINET DCP network packets under certain circumstances. Precondition for this scenario is a direct Layer 2 access to the affected products. Siemens has released updates for several affected products, is working ...

SSA-701708 (Last Update: 2018-06-12): Local Privilege Escalation in Industrial Products

Titel

SSA-701708 (Last Update: 2018-06-12): Local Privilege Escalation in Industrial Products

Veröffentlicht

12. Juni 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-701708.pdf

Text

In non-default configurations several industrial products are affected by a vulnerability that could allow local Microsoft Windows operating system users to escalate their privileges. Siemens provides updates for several products and a temporary fix for the remaining affected products. Siemens is working on new versions for the remaining affected products ...

SSA-977428 (Last Update: 2018-06-12): Vulnerabilities in SCALANCE M875

Titel

SSA-977428 (Last Update: 2018-06-12): Vulnerabilities in SCALANCE M875

Veröffentlicht

12. Juni 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-977428.pdf

Text

Multiple vulnerabilities have been identified in the web interface of SCALANCE M875. The web interface of SCALANCE M875 could allow Cross-Site Request Forgery (CSRF), stored Cross-Site Scripting (XSS), or command injection attacks if an attacker is authenticated or tricks a legitimate authenticated user into accessing a malicious link. Siemens recommends ...

SSA-755010 (Last Update: 2018-06-12): Vulnerability in RAPIDLab 1200 and RAPIDPoint 400/500 Blood Gas Analyzers

Titel

SSA-755010 (Last Update: 2018-06-12): Vulnerability in RAPIDLab 1200 and RAPIDPoint 400/500 Blood Gas Analyzers

Veröffentlicht

12. Juni 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-755010.pdf

Text

SSA-566773 (Last Update: 2018-06-12): Vulnerabilities in Building Technologies Products

Titel

SSA-566773 (Last Update: 2018-06-12): Vulnerabilities in Building Technologies Products

Veröffentlicht

12. Juni 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-566773.pdf

Text

The License Management System (LMS), which is used by multiple Siemens' building automation products, includes a vulnerable version of Gemalto Sentinel LDK RTE. Gemalto Sentinel LDK RTE is affected by two vulnerabilities that could allow denial-of-service and a cross-site-scripting vulnerability. Siemens recommends updating the affected dongle driver.

SSA-931064 (Last Update: 2018-06-12): Authentication Bypass in SIMATIC Logon

Titel

SSA-931064 (Last Update: 2018-06-12): Authentication Bypass in SIMATIC Logon

Veröffentlicht

12. Juni 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-931064.pdf

Text

The latest update for SIMATIC Logon fixes a security vulnerability that could allow attackers to circumvent user authentication under certain conditions. SIMATIC WinCC, SIMATIC PCS 7, SIMATIC PDM, and SIMATIC IT Production Suite provide SIMATIC Logon as component of the product. Installing the SIMATIC Logon update fixes the vulnerability for ...

SSA-480829 (Last Update: 2018-06-12): Cross-Site-Scripting Vulnerabilities in SCALANCE X Switches

Titel

SSA-480829 (Last Update: 2018-06-12): Cross-Site-Scripting Vulnerabilities in SCALANCE X Switches

Veröffentlicht

12. Juni 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-480829.pdf

Text

Two cross-site-scripting (XSS) vulnerabilities were found in the web server of SCALANCE X switches. Siemens recommends updating the firmware to the newest version as soon as possible.

SSA-523365 (Last Update: 2018-06-12): Vulnerability in SIMATIC PCS 7

Titel

SSA-523365 (Last Update: 2018-06-12): Vulnerability in SIMATIC PCS 7

Veröffentlicht

12. Juni 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-523365.pdf

Text

The latest software update for SIMATIC PCS 7 fixes a vulnerability, which could allow an attacker to cause a Denial-of-Service (DoS) condition under certain circumstances.

Donnerstag, 07.06.2018

17:55

Rockwell Automation RSLinx Classic and FactoryTalk Linx Gateway

Titel

Rockwell Automation RSLinx Classic and FactoryTalk Linx Gateway

Veröffentlicht

7. Juni 2018 17:55

URL

https://ics-cert.us-cert.gov/advisories/ICSA-18-158-01

Text

This advisory contains mitigation recommendations for an unquoted search path or element vulnerability in the Rockwell Automation RSLinix Classic software platform.

Dienstag, 05.06.2018

16:05