Bulletins | CERT@VDE

SSA-520004 V1.0: Telnet Authentication Vulnerability in SIMATIC HMI Comfort Panels

Titel

SSA-520004 V1.0: Telnet Authentication Vulnerability in SIMATIC HMI Comfort Panels

Veröffentlicht

28. Januar 2021 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-520004.pdf

Text

SIMATIC HMI Panels are affected by a vulnerability that could allow a remote attacker to gain full access to the device(s), if the telnet service is enabled. Siemens has released updates for the affected products and recommends to update to the latest versions.

Mittwoch, 27.01.2021

Denial of Service in Rexroth ID 200/C-ETH using EtherNet/IP Protocol

BOSCH PSIRT

Titel

Denial of Service in Rexroth ID 200/C-ETH using EtherNet/IP Protocol

Veröffentlicht

27. Januar 2021 01:00

URL

https://psirt.bosch.com/security-advisories/bosch-sa-775371.html

Text

BOSCH-SA-775371: The ID 200/C-ETH (Rexroth No. 3842 410 060) sold by Bosch Rexroth contains communication technology (499ES EtherNet/IP) from Real Time Automation (RTA) in which a critical vulnerability has been discovered. By exploiting the vulnerability an attacker can send a specially crafted packet that may result in a denial-of-service condition ...

Donnerstag, 21.01.2021

Two Vulnerabilities in Bosch Fire Monitoring System (FSM)

BOSCH PSIRT

Titel

Two Vulnerabilities in Bosch Fire Monitoring System (FSM)

Veröffentlicht

21. Januar 2021 01:00

URL

https://psirt.bosch.com/security-advisories/bosch-sa-332072-bt.html

Text

BOSCH-SA-332072-BT: Two vulnerabilties have been discovered affecting the Bosch Fire Monitoring System (FSM-2500 and FSM-5000). The critical issue applies to FSM systems with versions 5.2 and lower. Bosch rates these vulnerabilities with a CVSS v3.1 Base Score of 4.4 and 10.0 (medium and critical) and strongly recommends customers to update ...

Dienstag, 19.01.2021

SSA-646763 V1.0: DNSpooq - Dnsmasq Vulnerabilities in SCALANCE and RUGGEDCOM Devices

Titel

SSA-646763 V1.0: DNSpooq - Dnsmasq Vulnerabilities in SCALANCE and RUGGEDCOM Devices

Veröffentlicht

19. Januar 2021 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-646763.pdf

Text

Security researchers discovered and disclosed seven vulnerabilities in the open-source DNS component “dnsmasq”, also known as “DNSpooq” vulnerabilities (CVE-2020-25681 through CVE-2020-25687). Three vulnerabilities (CVE-2020-25684 through CVE-2020-25686) affect the validation of DNS responses and impact several SCALANCE and RUGGEDCOM devices as listed below. Siemens is preparing updates and recommends countermeasures for ...

Freitag, 15.01.2021

SSA-979834 V1.1 (Last Update: 2021-01-15): Multiple vulnerabilities in Solid Edge

Titel

SSA-979834 V1.1 (Last Update: 2021-01-15): Multiple vulnerabilities in Solid Edge

Veröffentlicht

15. Januar 2021 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-979834.pdf

Text

Solid Edge is affected by multiple vulnerabilities that could allow arbitrary code execution on an affected system. Siemens has released an update for Solid Edge and recommends to update to the latest version.

Dienstag, 12.01.2021

17:00

SOOIL Dana Diabecare RS Products

Titel

SOOIL Dana Diabecare RS Products

Veröffentlicht

12. Januar 2021 17:00

URL

https://us-cert.cisa.gov/ics/advisories/icsma-21-012-01

Text

This advisory contains mitigations for Use of Hard Coded Credentials, Insufficiently Protected Credentials, Use of Insufficiently Random Values, Use of Client-side Authentication, Client-side Enforcement of Server-side Security, Authentication Bypass by Capture-Replay, Unprotected Transport of Credentials, Key Exchange Without Entity Authentication, and Authentication Bypass by Spoofing vulnerabilities in SOOIL Dana Diabecare ...

16:55

Schneider Electric EcoStruxure Power Build-Rapsody

Titel

Schneider Electric EcoStruxure Power Build-Rapsody

Veröffentlicht

12. Januar 2021 16:55

URL

https://us-cert.cisa.gov/ics/advisories/icsa-21-012-01

Text

This advisory contains mitigations for an Unrestricted Upload of File with Dangerous Type vulnerability in the Schneider Electric EcoStruxure Power Build-Rapsody software.

16:45

Siemens JT2Go and Teamcenter Visualization

Titel

Siemens JT2Go and Teamcenter Visualization

Veröffentlicht

12. Januar 2021 16:45

URL

https://us-cert.cisa.gov/ics/advisories/icsa-21-012-03

Text

This advisory contains mitigations for a Type Confusion, Improper Restriction of XML External Entity Reference, Out-of-bounds Write, Heap-based Buffer Overflow, Stack-based Buffer Overflow, Untrusted Pointer Dereference, and Out-of-bounds Read vulnerabilities in Siemens JT2Go and Teamcenter Visualization software products.

16:40

https://us-cert.cisa.gov/ics/advisories/icsa-21-012-04

Siemens Solid Edge

Titel

Siemens Solid Edge

Veröffentlicht

12. Januar 2021 16:40

URL

Text

This advisory contains mitigations for Out-of-bounds Write, and Stack-based Buffer Overflow vulnerabilities in Siemens Solid Edge software tools.

16:35

Siemens SCALANCE X Products

Titel

Siemens SCALANCE X Products

Veröffentlicht

12. Januar 2021 16:35

URL

https://us-cert.cisa.gov/ics/advisories/icsa-21-012-05

Text

This advisory contains mitigations for Missing Authentication for Critical Function, and Heap-based Buffer Overflow vulnerabilities in Siemens SCALANCE X switches.

16:30

Siemens Opcenter Execution Core (Update B)

Titel

Siemens Opcenter Execution Core (Update B)

Veröffentlicht

12. Januar 2021 16:30

URL

https://us-cert.cisa.gov/ics/advisories/icsa-20-196-07

Text

This updated advisory is a follow-up to the original advisory titled ICSA-20-196-07 Siemens Opcenter Execution Core (Update A) that was published August 11, 2020, to the ICS webpage on us-cert.cisa.gov. This advisory contains mitigations for Cross-site Scripting, SQL Injection, and Improper Access Control vulnerabilities in Siemens Opcenter Execution Core software.

16:25

Siemens SIMATIC, SINAMICS, SINEC, SINEMA, SINUMERIK (Update E)

Titel

Siemens SIMATIC, SINAMICS, SINEC, SINEMA, SINUMERIK (Update E)

Veröffentlicht

12. Januar 2021 16:25

URL

https://us-cert.cisa.gov/ics/advisories/icsa-20-161-04

Text

This updated advisory is a follow-up to the advisory update titled ICSA-20-161-04 Siemens SIMATIC, SINAMICS, SINEC, SINEMA, SINUMERIK (Update D) that was published December 8, 2020, to the ICS webpage on us-cert.cisa.gov. This advisory contains mitigations for an Unquoted Search Path or Element vulnerability in Siemens SIMATIC, SINAMICS, SINEC, SINEMA, ...

16:20

Siemens SIMOTICS, Desigo, APOGEE, and TALON (Update A)

Titel

Siemens SIMOTICS, Desigo, APOGEE, and TALON (Update A)

Veröffentlicht

12. Januar 2021 16:20

URL

https://us-cert.cisa.gov/ics/advisories/icsa-20-105-06

Text

This updated advisory is a follow-up to the original advisory titled ICSA-20-105-06 Siemens SIMOTICS, Desigo, APOGEE, and TALON that was published April 14, 2020, to the ICS webpage on us-cert.cisa.gov. This advisory contains mitigations for a business logic errors vulnerability in Siemens SIMOTICS, Desigo, APOGEE, and TALON products.

16:15

Siemens SCALANCE & SIMATIC (Update C)

Titel

Siemens SCALANCE & SIMATIC (Update C)

Veröffentlicht

12. Januar 2021 16:15

URL

https://us-cert.cisa.gov/ics/advisories/icsa-20-105-07

Text

This updated advisory is a follow-up to the advisory update titled ICSA-20-105-07 Siemens SCALANCE & SIMATIC (Update B) that was published September 8, 2020, to the ICS webpage on us-cert.cisa.gov. This advisory contains mitigations for a resource exhaustion vulnerability in Siemens SCALANCE and SIMATIC products.

SSA-102233 V1.4 (Last Update: 2021-01-12): SegmentSmack in VxWorks-based Industrial Devices

Titel

SSA-102233 V1.4 (Last Update: 2021-01-12): SegmentSmack in VxWorks-based Industrial Devices

Veröffentlicht

12. Januar 2021 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-102233.pdf

Text

The products listed below contain a vulnerability that could allow remote attackers to affect the availability of the devices under certain conditions. The underlying TCP stack can be forced to make very computation expensive calls for every incoming packet which can lead to a Denial-of-Service. Siemens is working on software ...

SSA-162506 V1.1 (Last Update: 2021-01-12): DHCP Client Vulnerability in SIMOTICS CONNECT 400, Desigo PXC/PXM, APOGEE MEC/MBC/PX...

Titel

SSA-162506 V1.1 (Last Update: 2021-01-12): DHCP Client Vulnerability in SIMOTICS CONNECT 400, Desigo PXC/PXM, APOGEE MEC/MBC/PXC, APOGEE PXC Series, and TALON TC Series

Veröffentlicht

12. Januar 2021 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-162506.pdf

Text

SIMOTICS CONNECT 400, Desigo (Power PC-based), APOGEE MEC/MBC/PXC and TALON TC products are affected by a DHCP Client vulnerability as initially reported in SSA-434032 for the Mentor Nucleus Networking Module. Siemens has released updates for several affected products and recommends to update to the latest versions. Siemens recommends countermeasures for ...

SSA-270778 V1.6 (Last Update: 2021-01-12): Denial-of-Service Vulnerability in SIMATIC PCS 7, SIMATIC WinCC and SIMATIC NET PC S...

Titel

SSA-270778 V1.6 (Last Update: 2021-01-12): Denial-of-Service Vulnerability in SIMATIC PCS 7, SIMATIC WinCC and SIMATIC NET PC Software

Veröffentlicht

12. Januar 2021 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-270778.pdf

Text

A Denial-of-Service vulnerability was found in SIMATIC PCS 7, SIMATIC WinCC and SIMATIC NET PC software when encrypted communication is enabled. The vulnerability could allow an attacker with network access to cause a Denial-of-Service condition under certain circumstances (versions prior to SIMATIC WinCC V7.3 or SIMATIC PCS 7 V8.1 are ...

SSA-312271 V1.5 (Last Update: 2021-01-12): Unquoted Search Path Vulnerabilities in Windows-based Industrial Software Applications

Titel

SSA-312271 V1.5 (Last Update: 2021-01-12): Unquoted Search Path Vulnerabilities in Windows-based Industrial Software Applications

Veröffentlicht

12. Januar 2021 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-312271.pdf

Text

The latest update for affected products fix local privilege escalation vulnerabilities that could allow authorized local users with administrative privileges to execute custom code with SYSTEM level privileges. Siemens has released updates for some of the affected products, and is working on further updates. For the remaining affected products, Siemens ...

SSA-455843 V1.3 (Last Update: 2021-01-12): WIBU Systems CodeMeter Runtime Vulnerabilities in Siemens and Siemens Energy Products

Titel

SSA-455843 V1.3 (Last Update: 2021-01-12): WIBU Systems CodeMeter Runtime Vulnerabilities in Siemens and Siemens Energy Products

Veröffentlicht

12. Januar 2021 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-455843.pdf

Text

CISA and WIBU Systems disclosed six vulnerabilities in different versions of CodeMeter Runtime, a product provided by WIBU Systems and used in several Siemens and Siemens Energy products for license management. The vulnerabilities are described in the section “Vulnerability Classification” below and got assigned the CVE IDs CVE-2020-14509, CVE-2020-14513, CVE-2020-14515, ...

SSA-622830 V1.0: Multiple Vulnerabilities in JT2Go and Teamcenter Visualization

Titel

SSA-622830 V1.0: Multiple Vulnerabilities in JT2Go and Teamcenter Visualization

Veröffentlicht

12. Januar 2021 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-622830.pdf

Text

JT2Go and Teamcenter Visualization are affected by multiple vulnerabilities that could lead to arbitrary code execution or data extraction on the target host system. Siemens has released updates for both affected products and recommends to update to the latest versions. Siemens is also preparing further updates and recommends specific countermeasures ...

SSA-604937 V1.2 (Last Update: 2021-01-12): Multiple Web Server Vulnerabilities in Opcenter Execution Core

Titel

SSA-604937 V1.2 (Last Update: 2021-01-12): Multiple Web Server Vulnerabilities in Opcenter Execution Core

Veröffentlicht

12. Januar 2021 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-604937.pdf

Text

Opcenter Execution Core (formerly known as Camstar Enterprise Platform) contains a cross-site scripting (CVE-2020-7576), an SQL injection (CVE-2020-7577), a privilege escalation (CVE-2020-7578), and an information disclosure vulnerability (CVE-2020-28930) in various versions of the product. Siemens has released an update for Opcenter Execution Core and recommends to update to the latest ...

SSA-629512 V1.2 (Last Update: 2021-01-12): Local Privilege Escalation Vulnerability in TIA Portal

Titel

SSA-629512 V1.2 (Last Update: 2021-01-12): Local Privilege Escalation Vulnerability in TIA Portal

Veröffentlicht

12. Januar 2021 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-629512.pdf

Text

The latest updates for TIA Portal fix a vulnerability that could allow a local attacker to execute arbitrary code with SYSTEM privileges. Siemens has released updates for the affected products and recommends to update to the latest version(s).

SSA-274900 V1.0: Use of hardcoded key in Scalance X devices under certain conditions

Titel

SSA-274900 V1.0: Use of hardcoded key in Scalance X devices under certain conditions

Veröffentlicht

12. Januar 2021 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-274900.pdf

Text

Scalance X devices might not generate a unique random key after factory reset, and use a private key shipped with the firmware Siemens has released updates for some devices, is working on updates for the remaining affected products and recommends specific countermeasures until fixes are available.

SSA-139628 V1.0: Vulnerabilities in Web Server for Scalance X Products

Titel

SSA-139628 V1.0: Vulnerabilities in Web Server for Scalance X Products

Veröffentlicht

12. Januar 2021 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-139628.pdf

Text

Several SCALANCE X switches contain vulnerabilities in the web server of the affected devices. An unauthenticated attacker could reboot, cause denial-of-service conditions and potentially impact the system by other means through heap and buffer overflow vulnerabilities. Siemens has released updates for several affected products and recommends to update to the ...