• 1 (current)
  • 2
Samstag, 29.05.2021
00:29
US CERT
AA21-148A: Sophisticated Spearphishing Campaign Targets Government Organizations, IGOs, and NGOs
Titel
AA21-148A: Sophisticated Spearphishing Campaign Targets Government Organizations, IGOs, and NGOs
Veröffentlicht
29. Mai 2021 00:29
URL
https://us-cert.cisa.gov/ncas/alerts/aa21-148a
Text
Original release date: May 28, 2021 | Last revised: May 29, 2021SummaryThis Joint Cybersecurity Advisory uses the MITRE Adversarial Tactics, Techniques, and Common Knowledge (ATT&CK®) framework, Version 9. See the ATT&CK for Enterprise for all referenced threat actor tactics and techniques. The Cybersecurity and Infrastructure Security Agency (CISA) and the ...
Freitag, 28.05.2021
02:00
SIEMENS CERT
SSA-434534 V1.0: Memory Protection Bypass Vulnerability in SIMATIC S7-1200 and S7-1500 CPU Families
Titel
SSA-434534 V1.0: Memory Protection Bypass Vulnerability in SIMATIC S7-1200 and S7-1500 CPU Families
Veröffentlicht
28. Mai 2021 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-434534.pdf
Text
SIMATIC S7-1200 and S7-1500 CPU products contain a memory protection bypass vulnerability that could allow an attacker to write arbitrary data and code to protected memory areas or read sensitive data to launch further attacks. Siemens has released updates for several affected products and strongly recommends to update to the ...
02:00
BOSCH PSIRT
Several Vulnerabilities in Bosch B426, B426-CN/B429-CN, and B426-M
Titel
Several Vulnerabilities in Bosch B426, B426-CN/B429-CN, and B426-M
Veröffentlicht
28. Mai 2021 02:00
URL
https://psirt.bosch.com/security-advisories/bosch-sa-196933-bt.html
Text

BOSCH-SA-196933-BT: A security vulnerability affects the Bosch B426, B426-CN/B429-CN, and B426-M. The vulnerability is exploitable via the network interface. Bosch rates this vulnerability at 8.0 (High) and recommends customers to update vulnerable components with fixed software versions. A second vulnerable condition was found when using http protocol, in which the ...

Dienstag, 25.05.2021
02:00
SIEMENS CERT
SSA-119468 V1.0: Luxion KeyShot Vulnerabilities in Solid Edge
Titel
SSA-119468 V1.0: Luxion KeyShot Vulnerabilities in Solid Edge
Veröffentlicht
25. Mai 2021 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-119468.pdf
Text
The Solid Edge installation package includes a specific version of the third-party product KeyShot from Luxion, which may not contain the latest security fixes provided by Luxion. Siemens recommends to update KeyShot according to the information in the Luxion Security Advisory LSA-394129.
Mittwoch, 19.05.2021
02:00
BOSCH PSIRT
Vulnerability in the routing protocol of the PLC runtime
Titel
Vulnerability in the routing protocol of the PLC runtime
Veröffentlicht
19. Mai 2021 02:00
URL
https://psirt.bosch.com/security-advisories/bosch-sa-350374.html
Text

BOSCH-SA-350374: The control systems IndraMotion MTX, MLC and MLD and the ctrlX CORE PLC application contain PLC technology from Codesys GmbH. The manufacturer Codesys GmbH published a security bulletin \[1\] about a weakness in the routing protocol for the communication between the PLC runtime and clients. By exploiting the vulnerability, ...

Montag, 17.05.2021
02:00
SIEMENS CERT
SSA-663999 V1.1 (Last Update: 2021-05-17): Multiple File Parsing Vulnerabilities in JT2Go and Teamcenter Visualization before V...
Titel
SSA-663999 V1.1 (Last Update: 2021-05-17): Multiple File Parsing Vulnerabilities in JT2Go and Teamcenter Visualization before V13.1.0.1
Veröffentlicht
17. Mai 2021 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-663999.pdf
Text
Siemens has released version V13.1.0.1 for JT2Go and Teamcenter Visualization to fix multiple vulnerabilities that could be triggered when the products read files in different file formats (BMP, TIFF, CGM, TGA, PCT, HPG, PLT, RAS, PAR, ASM, DXF, DWG). If a user is tricked to opening of a malicious file ...
02:00
SIEMENS CERT
SSA-695540 V1.0: ASM and PAR File Parsing Vulnerabilities in JT2Go and Teamcenter Visualization before V13.1.0.2
Titel
SSA-695540 V1.0: ASM and PAR File Parsing Vulnerabilities in JT2Go and Teamcenter Visualization before V13.1.0.2
Veröffentlicht
17. Mai 2021 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-695540.pdf
Text
Siemens has released version V13.1.0.2 for JT2Go and Teamcenter Visualization to fix multiple vulnerabilities that could be triggered when the products read files in ASM and PAR file formats. If a user is tricked to opening of a malicious file with the affected products, this could lead to application crash, ...
02:00
SIEMENS CERT
SSA-622830 V1.2 (Last Update: 2021-05-17): Multiple File Parsing Vulnerabilities in JT2Go and Teamcenter Visualization before V...
Titel
SSA-622830 V1.2 (Last Update: 2021-05-17): Multiple File Parsing Vulnerabilities in JT2Go and Teamcenter Visualization before V13.1.0
Veröffentlicht
17. Mai 2021 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-622830.pdf
Text
Siemens has released version V13.1.0 for JT2Go and Teamcenter Visualization to fix multiple vulnerabilities that could be triggered when the products read files in different file formats (JT, XML, CG4, CGM, PDF, RGB, SGI, TGA, PAR, PCX). If a user is tricked to opening of a malicious file with the ...
Dienstag, 11.05.2021
21:00
US CERT
AA21-131A: DarkSide Ransomware: Best Practices for Preventing Business Disruption from Ransomware Attacks
Titel
AA21-131A: DarkSide Ransomware: Best Practices for Preventing Business Disruption from Ransomware Attacks
Veröffentlicht
11. Mai 2021 21:00
URL
https://us-cert.cisa.gov/ncas/alerts/aa21-131a
Text
Original release date: May 11, 2021 | Last revised: May 20, 2021SummaryThis Advisory uses the MITRE Adversarial Tactics, Techniques, and Common Knowledge (ATT&CK®) framework, Version 9. See the ATT&CK for Enterprise for all referenced threat actor tactics and techniques. The Cybersecurity and Infrastructure Security Agency (CISA) and the Federal Bureau ...
02:00
SIEMENS CERT
SSA-324955 V1.0: SAD DNS Attack in Linux Based Products
Titel
SSA-324955 V1.0: SAD DNS Attack in Linux Based Products
Veröffentlicht
11. Mai 2021 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-324955.pdf
Text
A vulnerability made public under the name SAD DNS affects Domain Name System resolvers due to a vulnerability in the Linux kernel when handling ICMP packets. The Siemens products which are affected are listed below. For more information please see https://www.saddns.net/. Siemens has released updates for several affected products and ...
02:00
SIEMENS CERT
SSA-501073 V1.0: Vulnerabilities in Controllers CPU 1518 MFP using Intel CPUs (November 2020)
Titel
SSA-501073 V1.0: Vulnerabilities in Controllers CPU 1518 MFP using Intel CPUs (November 2020)
Veröffentlicht
11. Mai 2021 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-501073.pdf
Text
Intel has published information on vulnerabilities in Intel products in November 2020. This advisory lists the Siemens Controllers that are affected by these vulnerabilities. In this advisory we take a representative CVE from each advisory: “Intel CSME, SPS, TXE, AMT and DAL Advisory” Intel-SA-00391 is represented by CVE-2020-8744 “BIOS Advisory” ...
02:00
SIEMENS CERT
SSA-538778 V1.0: SmartVNC Vulnerabilities in SIMATIC HMI/WinCC Products
Titel
SSA-538778 V1.0: SmartVNC Vulnerabilities in SIMATIC HMI/WinCC Products
Veröffentlicht
11. Mai 2021 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-538778.pdf
Text
Multiple SmartVNC vulnerabilities in the affected products listed below could allow remote code execution and Denial-of-Service attacks under certain conditions. Siemens has released updates for the affected products and recommends to update to the latest version.
02:00
SIEMENS CERT
SSA-594364 V1.0: Denial-of-Service Vulnerability in SNMP Implementation of WinCC Runtime
Titel
SSA-594364 V1.0: Denial-of-Service Vulnerability in SNMP Implementation of WinCC Runtime
Veröffentlicht
11. Mai 2021 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-594364.pdf
Text
A denial-of-service vulnerability in WinCC Runtime could allow an unauthenticated attacker with network access to cause a denial-of-service condition in the SNMP service by sending crafted SNMP packets to port 161/udp. Siemens has released updates for the affected products and recommends to update to the latest versions.
02:00
SIEMENS CERT
SSA-676775 V1.0: Denial-of-Service Vulnerability in SIMATIC NET CP 343-1 Devices
Titel
SSA-676775 V1.0: Denial-of-Service Vulnerability in SIMATIC NET CP 343-1 Devices
Veröffentlicht
11. Mai 2021 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-676775.pdf
Text
A vulnerability in SIMATIC CP343-1 devices could allow an attacker to cause a Denial-of-Service condition on TCP port 102 of the affected devices by sending specially crafted packets. Siemens recommends specific countermeasures for products where updates are not, or not yet available.
02:00
SIEMENS CERT
SSA-794542 V1.1 (Last Update: 2021-05-11): Insecure Folder Permissions in SIMARIS Configuration
Titel
SSA-794542 V1.1 (Last Update: 2021-05-11): Insecure Folder Permissions in SIMARIS Configuration
Veröffentlicht
11. Mai 2021 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-794542.pdf
Text
The installation of SIMARIS configuration causes insecure folder permissions that could allow vertical privilege escalation. Siemens has released an update for SIMARIS and recommends to update to the latest version.
02:00
SIEMENS CERT
SSA-854248 V1.0: Information Disclosure Vulnerability in Mendix Excel Importer Module
Titel
SSA-854248 V1.0: Information Disclosure Vulnerability in Mendix Excel Importer Module
Veröffentlicht
11. Mai 2021 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-854248.pdf
Text
The latest update of Mendix Excel Importer module fixes an infomation disclosure vulnerability. Mendix has released an update for the Mendix Excel Importer module and recommends to update to the latest version.
02:00
SIEMENS CERT
SSA-919955 V1.0: Information Disclosure Vulnerability in Mendix Database Replication Module
Titel
SSA-919955 V1.0: Information Disclosure Vulnerability in Mendix Database Replication Module
Veröffentlicht
11. Mai 2021 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-919955.pdf
Text
The latest update of Mendix Database Replication module fixes a infomation disclosure vulnerability. Mendix has released an update for the Mendix Database Replication module and recommends to update to the latest version.
02:00
SIEMENS CERT
SSA-940818 V1.0: UltraVNC Vulnerabilities in SIMATIC HMIs/WinCC Products
Titel
SSA-940818 V1.0: UltraVNC Vulnerabilities in SIMATIC HMIs/WinCC Products
Veröffentlicht
11. Mai 2021 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-940818.pdf
Text
UltraVNC vulnerabilities in the affected products listed below could allow remote code execution, information disclosure and Denial-of-Service attacks under certain conditions. Siemens has released updates for the affected products and recommends to update to the latest versions.
02:00
SIEMENS CERT
SSA-983548 V1.0: Multiple SPP File Parsing Vulnerabilities in Tecnomatix Plant Simulation
Titel
SSA-983548 V1.0: Multiple SPP File Parsing Vulnerabilities in Tecnomatix Plant Simulation
Veröffentlicht
11. Mai 2021 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-983548.pdf
Text
Siemens Tecnomatix Plant Simulation has released an update for version V16.0 that fixes multiple vulnerabilities that could be triggered when the application reads SPP files. If a user is tricked to open a malicious file using the affected application, this could lead to a crash, and potentially also to arbitrary ...
02:00
SIEMENS CERT
SSB-439005 V3.4 (Last Update: 2021-05-11): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 151...
Titel
SSB-439005 V3.4 (Last Update: 2021-05-11): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP
Veröffentlicht
11. Mai 2021 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssb-439005.pdf
Text
02:00
SIEMENS CERT
SSA-462066 V2.3 (Last Update: 2021-05-11): Vulnerability known as TCP SACK PANIC in Industrial Products
Titel
SSA-462066 V2.3 (Last Update: 2021-05-11): Vulnerability known as TCP SACK PANIC in Industrial Products
Veröffentlicht
11. Mai 2021 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-462066.pdf
Text
Multiple industrial products are affected by a vulnerability in the kernel known as TCP SACK PANIC. The vulnerability could allow a remote attacker to cause a denial of service condition. Siemens has released updates for several affected products and recommends to update to the new versions. Siemens is preparing further ...
02:00
SIEMENS CERT
SSA-478893 V1.1 (Last Update: 2021-05-11): TightVNC Vulnerabilities in Industrial Products (Revoked)
Titel
SSA-478893 V1.1 (Last Update: 2021-05-11): TightVNC Vulnerabilities in Industrial Products (Revoked)
Veröffentlicht
11. Mai 2021 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-478893.pdf
Text
Multiple TightVNC (V1.x) vulnerabilities could allow remote code execution and Denial-of-Service attacks under certain conditions. Siemens has previously released this advisory containing a set of products that were considered to be affected. Through Siemens’ continuous investigation processes it was identified that all products previously advised are not affected by any ...
02:00
SIEMENS CERT
SSA-541018 V1.1 (Last Update: 2021-05-11): Embedded TCP/IP Stack Vulnerabilities (AMNESIA:33) in SENTRON PAC / 3VA Devices (Par...
Titel
SSA-541018 V1.1 (Last Update: 2021-05-11): Embedded TCP/IP Stack Vulnerabilities (AMNESIA:33) in SENTRON PAC / 3VA Devices (Part 2)
Veröffentlicht
11. Mai 2021 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-541018.pdf
Text
Security researchers discovered and disclosed 33 vulnerabilities in several open-source TCP/IP stacks for embedded devices, also known as “AMNESIA:33” vulnerabilities. This advisory describes the impact of two of these vulnerabilities (CVE-2020-13987, CVE-2020-17437) to Siemens products. Siemens has released updates for several affected products and recommends to update to the latest ...
02:00
SIEMENS CERT
SSA-646763 V1.3 (Last Update: 2021-05-11): DNSpooq - Dnsmasq Vulnerabilities in SCALANCE and RUGGEDCOM Devices
Titel
SSA-646763 V1.3 (Last Update: 2021-05-11): DNSpooq - Dnsmasq Vulnerabilities in SCALANCE and RUGGEDCOM Devices
Veröffentlicht
11. Mai 2021 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-646763.pdf
Text
Security researchers discovered and disclosed seven vulnerabilities in the open-source DNS component “dnsmasq”, also known as “DNSpooq” vulnerabilities (CVE-2020-25681 through CVE-2020-25687). Three vulnerabilities (CVE-2020-25684 through CVE-2020-25686) affect the validation of DNS responses and impact several SCALANCE and RUGGEDCOM devices as listed below. Siemens has released updates for several affected products ...
02:00
SIEMENS CERT
SSA-936080 V1.1 (Last Update: 2021-05-11): Multiple Vulnerabilities in Third-Party Component libcurl
Titel
SSA-936080 V1.1 (Last Update: 2021-05-11): Multiple Vulnerabilities in Third-Party Component libcurl
Veröffentlicht
11. Mai 2021 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-936080.pdf
Text
SIMATIC NET CM 1542-1, SCALANCE SC600 family and SIMATIC NET CP 343-1 Advanced devices are vulnerable to a vulnerability in the third party component libcurl that could allow an attacker to cause a Denial-of-Service condition on the affected devices. Siemens has released an update for SCALANCE SC600. For the remaining ...
  • 1 (current)
  • 2

Letzte Updates

BOSCH PSIRT
31.10.2024
SIEMENS CERT
22.11.2024
US CERT
08.11.2024
US CERT (ICS)
21.11.2024

Nach Quelle

Archiv

2024
2023
2022
2021
2020
2019
2018
2017

Feeds