• 1
  • 2 (current)
Tuesday, 08.01.2019
01:00
SIEMENS CERT
SSA-346262 (Last Update: 2019-01-08): Denial-of-Service in Industrial Products
Title
SSA-346262 (Last Update: 2019-01-08): Denial-of-Service in Industrial Products
Published
Jan. 8, 2019, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-346262.pdf
Summary
Several industrial products are affected by a vulnerability that could allow remote attackers to conduct a Denial-of-Service (DoS) attack by sending specially crafted packets to port 161/udp (SNMP). Siemens has released updates for several affected products, and recommends that customers update to the new version. Siemens is preparing further updates ...
01:00
SIEMENS CERT
SSA-293562 (Last Update: 2019-01-08): Vulnerabilities in Industrial Products
Title
SSA-293562 (Last Update: 2019-01-08): Vulnerabilities in Industrial Products
Published
Jan. 8, 2019, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-293562.pdf
Summary
Several industrial devices are affected by two vulnerabilities that could allow an attacker to cause a Denial-of-Service condition via PROFINET DCP network packets under certain circumstances. The precondition for this scenario is a direct layer 2 access to the affected products. PROFIBUS interfaces are not affected. Siemens has released updates ...
01:00
SIEMENS CERT
SSA-592007 (Last Update: 2019-01-08): Denial-of-Service Vulnerability in Industrial Products
Title
SSA-592007 (Last Update: 2019-01-08): Denial-of-Service Vulnerability in Industrial Products
Published
Jan. 8, 2019, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-592007.pdf
Summary
Several industrial controllers are affected by a security vulnerability that could allow an attacker to cause a Denial-of-Service condition via PROFINET DCP network packets under certain circumstances. Precondition for this scenario is a direct OSI Layer 2 access to the affected products. PROFIBUS interfaces are not affected. Siemens has released ...
01:00
SIEMENS CERT
SSA-348629 (Last Update: 2019-01-08): Denial-of-Service Vulnerability in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Pr...
Title
SSA-348629 (Last Update: 2019-01-08): Denial-of-Service Vulnerability in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Professional and SIMATIC NET PC Software
Published
Jan. 8, 2019, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-348629.pdf
Summary
A Denial-of-Service vulnerability has been identified in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Professional and SIMATIC NET PC-Software. Siemens has released updates for several affected products and recommends that customers update to the new version. Siemens is preparing further updates and recommends specific countermeasures until patches are available.
01:00
SIEMENS CERT
SSA-181018 (Last Update: 2019-01-08): Heap Overflow Vulnerability in SCALANCE X switches, RUGGEDCOM WiMAX, RFID 181-EIP, and SI...
Title
SSA-181018 (Last Update: 2019-01-08): Heap Overflow Vulnerability in SCALANCE X switches, RUGGEDCOM WiMAX, RFID 181-EIP, and SIMATIC RF182C
Published
Jan. 8, 2019, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-181018.pdf
Summary
SCALANCE X switches, RUGGEDCOM WiMAX, RFID 181-EIP, and SIMATIC RF182C are affected by a vulnerability that could allow an unprivileged attacker located in the same local network segment (OSI Layer 2) to gain system privileges by sending a specially crafted DHCP response to a client's DHCP request. Siemens has released ...
01:00
SIEMENS CERT
SSA-325546 (Last Update: 2019-01-08): Denial-of-Service Vulnerabilities in EN100 Ethernet Communication Module of SWT3000
Title
SSA-325546 (Last Update: 2019-01-08): Denial-of-Service Vulnerabilities in EN100 Ethernet Communication Module of SWT3000
Published
Jan. 8, 2019, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-325546.pdf
Summary
The firmware variant IEC 61850 of the EN100 Ethernet communication module for SWT 3000 is affected by security vulnerabilities which could allow an attacker to conduct a Denial-of-Service attack over the network. Siemens has released updates for several affected products, is working on updates for the remaining affected products, and ...
01:00
SIEMENS CERT
SSA-306710 (Last Update: 2019-01-08): Denial-of-Service Vulnerability in SIMATIC S7-300 CPU
Title
SSA-306710 (Last Update: 2019-01-08): Denial-of-Service Vulnerability in SIMATIC S7-300 CPU
Published
Jan. 8, 2019, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-306710.pdf
Summary
Siemens has released a firmware update for the SIMATIC S7-300 CPU family which fixes a vulnerability that could allow remote attackers to perform a Denial-of-Service attack.
01:00
SIEMENS CERT
SSA-180635 (Last Update: 2019-01-08): Denial-of-Service Vulnerabilities in S7-1500 CPU
Title
SSA-180635 (Last Update: 2019-01-08): Denial-of-Service Vulnerabilities in S7-1500 CPU
Published
Jan. 8, 2019, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-180635.pdf
Summary
Older versions of the S7-1500 CPU are affected by two Denial-of-Service vulnerabilities. Siemens has released updates for the currently supported hardware versions.
01:00
SIEMENS CERT
SSA-535640 (Last Update: 2019-01-08): Vulnerability in Industrial Products
Title
SSA-535640 (Last Update: 2019-01-08): Vulnerability in Industrial Products
Published
Jan. 8, 2019, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-535640.pdf
Summary
Various industrial products use the Discovery Service of the OPC UA protocol stack by the OPC foundation https://github.com/OPCFoundation/UA-.NETStandard and could therefore be affected by the remote resource consumption attacks (CVE-2017-12069).
Thursday, 03.01.2019
16:10
US CERT (ICS)
Schneider Electric Pro-face GP-Pro EX
Title
Schneider Electric Pro-face GP-Pro EX
Published
Jan. 3, 2019, 4:10 p.m.
URL
https://ics-cert.us-cert.gov/advisories/ICSA-19-003-01
Summary
This advisory provides mitigation recommendations for an improper input validation vulnerability in Schneider Electric's Pro-face GP-Pro EX, an HMI screen editor and logic programming software.
16:05
US CERT (ICS)
Yokogawa Vnet/IP Open Communication Driver
Title
Yokogawa Vnet/IP Open Communication Driver
Published
Jan. 3, 2019, 4:05 p.m.
URL
https://ics-cert.us-cert.gov/advisories/ICSA-19-003-02
Summary
This advisory provides mitigation recommendations for a resource management error vulnerability in Yokogawa's Vnet/IP open communication driver.
16:00
US CERT (ICS)
Hetronic Nova-M
Title
Hetronic Nova-M
Published
Jan. 3, 2019, 4 p.m.
URL
https://ics-cert.us-cert.gov/advisories/ICSA-19-003-03
Summary
This advisory provides mitigation recommendations for an authentication bypass by capture-relay vulnerability in Hetronic's Nova-M remote control transmitters and receivers.
  • 1
  • 2 (current)

Last Updates

BOSCH PSIRT
06.12.2024
SIEMENS CERT
16.12.2024
US CERT
08.11.2024
US CERT (ICS)
19.12.2024

By Source

Archive

2024
2023
2022
2021
2020
2019
2018
2017

Feeds