• 1
  • 2 (current)
Tuesday, 14.05.2019
02:00
SIEMENS CERT
SSA-592007 (Last Update: 2019-05-14): Denial-of-Service Vulnerability in Industrial Products
Title
SSA-592007 (Last Update: 2019-05-14): Denial-of-Service Vulnerability in Industrial Products
Published
May 14, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-592007.pdf
Summary
Several industrial controllers are affected by a security vulnerability that could allow an attacker to cause a Denial-of-Service condition via PROFINET DCP network packets under certain circumstances. Precondition for this scenario is a direct OSI Layer 2 access to the affected products. PROFIBUS interfaces are not affected. Siemens has released ...
02:00
SIEMENS CERT
SSA-113131 (Last Update: 2019-05-14): Denial-of-Service Vulnerabilities in S7-400 CPUs
Title
SSA-113131 (Last Update: 2019-05-14): Denial-of-Service Vulnerabilities in S7-400 CPUs
Published
May 14, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-113131.pdf
Summary
Two vulnerabilities have been identified in the SIMATIC S7-400 CPU family that could allow an attacker to cause a Denial-of-Service condition. In order to exploit the vulnerability, an attacker must have access to the affected devices on port 102/tcp via Ethernet, PROFIBUS or Multi Point Interfaces (MPI). Siemens provides updates ...
02:00
SIEMENS CERT
SSA-480230 (Last Update: 2019-05-14): Denial-of-Service in Webserver of Industrial Products
Title
SSA-480230 (Last Update: 2019-05-14): Denial-of-Service in Webserver of Industrial Products
Published
May 14, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-480230.pdf
Summary
A vulnerability in the affected devices could allow an unauthorized attacker with network access to the webserver of an affected device to perform a denial-of-service attack. Siemens has released updates for several affected products, and recommends that customers update to the new version. Siemens is preparing further updates and recommends ...
02:00
SIEMENS CERT
SSA-902727 (Last Update: 2019-05-14): Multiple Vulnerabilities in Licensing Software for SISHIP Automation Solutions
Title
SSA-902727 (Last Update: 2019-05-14): Multiple Vulnerabilities in Licensing Software for SISHIP Automation Solutions
Published
May 14, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-902727.pdf
Summary
Multiple vulnerabilities have been identified in the WibuKey Digital Rights Management (DRM) solution, which affect SISHIP Automation Solutions. Siemens recommends users to apply the updates to WibuKey Digital Rights Management (DRM) provided by WIBU SYSTEMS AG.
02:00
SIEMENS CERT
SSA-307392 (Last Update: 2019-05-14): Denial-of-Service in OPC UA in Industrial Products
Title
SSA-307392 (Last Update: 2019-05-14): Denial-of-Service in OPC UA in Industrial Products
Published
May 14, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-307392.pdf
Summary
A vulnerability has been identified in the OPC UA server of several industrial products. The vulnerability could cause a Denial-of-Service condition on the service or the device. Siemens has released updates for several affected products, and recommends that customers update to the new version. Siemens is preparing further updates and ...
02:00
SIEMENS CERT
SSA-804486 (Last Update: 2019-05-14): Multiple Vulnerabilities in SIMATIC Panels and SIMATIC WinCC (TIA Portal)
Title
SSA-804486 (Last Update: 2019-05-14): Multiple Vulnerabilities in SIMATIC Panels and SIMATIC WinCC (TIA Portal)
Published
May 14, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-804486.pdf
Summary
The latest update for SIMATIC Panel Software and SIMATIC WinCC (TIA Portal) fixes two vulnerabilities. The most severe is a vulnerability which could allow an attacker with network access to the integrated device to read and write variables via SNMP. Siemens recommends to update to the newest version.
02:00
SIEMENS CERT
SSA-542701 (Last Update: 2019-05-14): Vulnerabilities in SIEMENS LOGO!
Title
SSA-542701 (Last Update: 2019-05-14): Vulnerabilities in SIEMENS LOGO!
Published
May 14, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-542701.pdf
Summary
Multiple vulnerabilities have been identified in SIEMENS LOGO!8 BM devices. The most severe vulnerability could lead to an attacker reading and modifying the device configuration if the attacker has access to port 10005/tcp.
02:00
SIEMENS CERT
SSA-865156 (Last Update: 2019-05-14): Denial-of-Service Vulnerability in SINAMICS PERFECT HARMONY GH180 Fieldbus Network
Title
SSA-865156 (Last Update: 2019-05-14): Denial-of-Service Vulnerability in SINAMICS PERFECT HARMONY GH180 Fieldbus Network
Published
May 14, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-865156.pdf
Summary
SINAMICS PERFECT HARMONY GH180 Drives NXG I and NXG II control contains a denial-of-service vulnerability within the Parameter Read/Write over Fieldbus network functionality. An attacker with access to the field bus network could cause a Denial-of-Service condition by sending specially crafted packets. By default, Parameter Read/Write over Fieldbus network is ...
02:00
SIEMENS CERT
SSA-606525 (Last Update: 2019-05-14): Denial-of-Service Vulnerability in SINAMICS PERFECT HARMONY GH180 Ethernet Modbus Interfa...
Title
SSA-606525 (Last Update: 2019-05-14): Denial-of-Service Vulnerability in SINAMICS PERFECT HARMONY GH180 Ethernet Modbus Interface (G28)
Published
May 14, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-606525.pdf
Summary
SINAMICS PERFECT HARMONY GH180 Drives NXG I and NXG II control contains a denial-of-service vulnerability within the Ethernet Modbus interface (G28). An attacker with access to the Ethernet Modbus Interface could cause a Denial-of-Service condition exceeding the number of available connections.
02:00
SIEMENS CERT
SSA-697412 (Last Update: 2019-05-14): Multiple Vulnerabilities in SIMATIC WinCC, SIMATIC WinCC Runtime, SIMATIC PCS 7, SIMATIC ...
Title
SSA-697412 (Last Update: 2019-05-14): Multiple Vulnerabilities in SIMATIC WinCC, SIMATIC WinCC Runtime, SIMATIC PCS 7, SIMATIC TIA Portal
Published
May 14, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-697412.pdf
Summary
The latest update for SIMATIC WinCC fixes multiple vulnerabilities. The most severe could allow an attacker to execute arbitrary commands on an affected system under certain conditions. Siemens has released updates for several affected products, and recommends that customers update to the new version. Siemens is preparing further updates and ...
Thursday, 02.05.2019
18:10
US CERT (ICS)
Orpak SiteOmat
Title
Orpak SiteOmat
Published
May 2, 2019, 6:10 p.m.
URL
https://ics-cert.us-cert.gov/advisories/ICSA-19-122-01
Summary
This advisory includes mitigations for use of hard-coded credentials, cross-site scripting, SQL injection, missing encryption of sensitive data, code injection, and stack-based buffer overflow vulnerabilities reported in Orpak’s SiteOmat, software for fuel station management.
18:00
US CERT (ICS)
Sierra Wireless AirLink ALEOS
Title
Sierra Wireless AirLink ALEOS
Published
May 2, 2019, 6 p.m.
URL
https://ics-cert.us-cert.gov/advisories/ICSA-19-122-03
Summary
This advisory includes mitigations for OS command injection, use of hard-coded credentials, unrestricted upload of file with dangerous type, cross-site scripting, cross-site request forgery, information exposure, and missing encryption of sensitive data vulnerabilities reported in the Sierra Wireless AirLink ALEOS products.
  • 1
  • 2 (current)

Last Updates

BOSCH PSIRT
06.12.2024
SIEMENS CERT
16.12.2024
US CERT
08.11.2024
US CERT (ICS)
19.12.2024

By Source

Archive

2024
2023
2022
2021
2020
2019
2018
2017

Feeds