• 1 (current)
  • 2
Tuesday, 11.03.2025
13:00
US CERT (ICS)
Optigo Networks Visual BACnet Capture Tool/Optigo Visual Networks Capture Tool
Title
Optigo Networks Visual BACnet Capture Tool/Optigo Visual Networks Capture Tool
Published
March 11, 2025, 1 p.m.
URL
https://www.cisa.gov/news-events/ics-advisories/icsa-25-070-02
Summary
View CSAF 1. EXECUTIVE SUMMARY CVSS v4 9.3 ATTENTION: Exploitable remotely/low attack complexity Vendor: Optigo Networks Equipment: Visual BACnet Capture Tool, Optigo Visual Networks Capture Tool Vulnerabilities: Use of Hard-coded, Security-relevant Constants, Authentication Bypass Using an Alternate Path or Channel 2. RISK EVALUATION Successful exploitation of these vulnerabilities could allow ...
13:00
US CERT (ICS)
Schneider Electric Uni-Telway Driver
Title
Schneider Electric Uni-Telway Driver
Published
March 11, 2025, 1 p.m.
URL
https://www.cisa.gov/news-events/ics-advisories/icsa-25-070-01
Summary
View CSAF 1. EXECUTIVE SUMMARY CVSS v4 6.8 ATTENTION: Low attack complexity Vendor: Schneider Electric Equipment: Uni-Telway Driver Vulnerability: Improper Input Validation 2. RISK EVALUATION Successful exploitation of this vulnerability could allow an attacker to perform a denial of service. 3. TECHNICAL DETAILS 3.1 AFFECTED PRODUCTS Schneider Electric reports the ...
01:00
SIEMENS CERT
SSA-593272 V2.4 (Last Update: 2025-03-11): SegmentSmack in Interniche IP-Stack based Industrial Devices
Title
SSA-593272 V2.4 (Last Update: 2025-03-11): SegmentSmack in Interniche IP-Stack based Industrial Devices
Published
March 11, 2025, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/html/ssa-593272.html
Summary
A vulnerability exists in affected products that could allow remote attackers to affect the availability of the devices under certain conditions. The underlying TCP stack can be forced to make very computation expensive calls for every incoming packet which can lead to a Denial-of-Service. Siemens has released new versions for ...
01:00
SIEMENS CERT
SSA-195895 V1.1 (Last Update: 2025-03-11): User Enumeration Vulnerability in the Webserver of SIMATIC Products
Title
SSA-195895 V1.1 (Last Update: 2025-03-11): User Enumeration Vulnerability in the Webserver of SIMATIC Products
Published
March 11, 2025, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/html/ssa-195895.html
Summary
The webserver of several SIMATIC products is affected by a user enumeration vulnerability that could allow an unauthenticated remote attacker to identify valid usernames. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens is preparing further fix versions and recommends specific ...
01:00
SIEMENS CERT
SSA-194557 V1.2 (Last Update: 2025-03-11): Improper Limitation of Filesystem Access through Web Server Vulnerability in SIPROTEC 5
Title
SSA-194557 V1.2 (Last Update: 2025-03-11): Improper Limitation of Filesystem Access through Web Server Vulnerability in SIPROTEC 5
Published
March 11, 2025, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/html/ssa-194557.html
Summary
Affected SIPROTEC 5 devices do not properly limit the access of the web server to the filesystem. This could allow an authenticated remote attacker to read arbitrary files or the entire filesystem of the device. Siemens has released new versions for several affected products and recommends to update to the ...
01:00
SIEMENS CERT
SSA-073066 V1.0: Multiple Vulnerabilities in SINEMA Remote Connect Server Before V3.2 SP3
Title
SSA-073066 V1.0: Multiple Vulnerabilities in SINEMA Remote Connect Server Before V3.2 SP3
Published
March 11, 2025, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/html/ssa-073066.html
Summary
SINEMA Remote Connect Server before V3.2 SP3 is affected by multiple vulnerabilities. Siemens has released a new version for SINEMA Remote Connect Server and recommends to update to the latest version.
01:00
SIEMENS CERT
SSA-054046 V1.3 (Last Update: 2025-03-11): Unauthenticated Information Disclosure in Web Server of SIMATIC S7-1500 CPUs
Title
SSA-054046 V1.3 (Last Update: 2025-03-11): Unauthenticated Information Disclosure in Web Server of SIMATIC S7-1500 CPUs
Published
March 11, 2025, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/html/ssa-054046.html
Summary
Several SIMATIC S7-1500 CPU versions are affected by an authentication bypass vulnerability that could allow an unauthenticated remote attacker to gain knowledge about actual and configured maximum cycle times and communication load of the CPU. Siemens has released new versions for several affected products and recommends to update to the ...
01:00
SIEMENS CERT
SSA-050438 V1.0: Multiple File Parsing Vulnerabilities in Teamcenter Visualization and Tecnomatix Plant Simulation
Title
SSA-050438 V1.0: Multiple File Parsing Vulnerabilities in Teamcenter Visualization and Tecnomatix Plant Simulation
Published
March 11, 2025, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/html/ssa-050438.html
Summary
Siemens Teamcenter Visualization and Tecnomatrix Plant Simulation contains multiple file parsing vulnerabilities that could be triggered when the application reads files in WRL format. If a user is tricked to open a malicious file with any of the affected products, this could lead the application to crash or potentially lead ...
01:00
SIEMENS CERT
SSA-039007 V1.4 (Last Update: 2025-03-11): Heap-based Buffer Overflow Vulnerability in User Management Component (UMC)
Title
SSA-039007 V1.4 (Last Update: 2025-03-11): Heap-based Buffer Overflow Vulnerability in User Management Component (UMC)
Published
March 11, 2025, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/html/ssa-039007.html
Summary
Siemens User Management Component (UMC) is affected by a heap-based buffer overflow vulnerability which could allow an unauthenticated remote attacker arbitrary code execution. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens is preparing further fix versions and recommends specific countermeasures ...
01:00
SIEMENS CERT
SSA-928984 V1.1 (Last Update: 2025-03-11): Heap-based Buffer Overflow Vulnerability in User Management Component (UMC)
Title
SSA-928984 V1.1 (Last Update: 2025-03-11): Heap-based Buffer Overflow Vulnerability in User Management Component (UMC)
Published
March 11, 2025, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/html/ssa-928984.html
Summary
Siemens User Management Component (UMC) is affected by a heap-based buffer overflow vulnerability which could allow an unauthenticated remote attacker arbitrary code execution. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens is preparing further fix versions and recommends specific countermeasures ...
01:00
SIEMENS CERT
SSA-876787 V1.4 (Last Update: 2025-03-11): Open Redirect Vulnerability in SIMATIC S7-1500 and S7-1200 CPUs
Title
SSA-876787 V1.4 (Last Update: 2025-03-11): Open Redirect Vulnerability in SIMATIC S7-1500 and S7-1200 CPUs
Published
March 11, 2025, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/html/ssa-876787.html
Summary
Several SIMATIC S7-1500 and S7-1200 CPU versions are affected by an open redirect vulnerability that could allow an attacker to make the web server of affected devices redirect a legitimate user to an attacker-chosen URL. For a successful attack, the legitimate user must actively click on an attacker-crafted link. Siemens ...
01:00
SIEMENS CERT
SSA-858251 V1.0: Authentication Bypass Vulnerabilities in OPC UA
Title
SSA-858251 V1.0: Authentication Bypass Vulnerabilities in OPC UA
Published
March 11, 2025, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/html/ssa-858251.html
Summary
The products listed below contain two authentication bypass vulnerabilities that could allow an attacker to gain access to the data managed by the server. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens is preparing further fix versions and recommends countermeasures ...
01:00
SIEMENS CERT
SSA-075201 V1.0: Multiple Vulnerabilities in SCALANCE LPE9403 Before V4.0
Title
SSA-075201 V1.0: Multiple Vulnerabilities in SCALANCE LPE9403 Before V4.0
Published
March 11, 2025, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/html/ssa-075201.html
Summary
SCALANCE LPE9403 is affected by multiple vulnerabilities that could allow an attacker to impact its confidentiality, integrity and availability. Siemens has released a new version for SCALANCE LPE9403 and recommends to update to the latest version.
01:00
SIEMENS CERT
SSA-832273 V1.7 (Last Update: 2025-03-11): Multiple Vulnerabilities in Fortigate NGFW Before V7.4.3 on RUGGEDCOM APE1808 Devices
Title
SSA-832273 V1.7 (Last Update: 2025-03-11): Multiple Vulnerabilities in Fortigate NGFW Before V7.4.3 on RUGGEDCOM APE1808 Devices
Published
March 11, 2025, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/html/ssa-832273.html
Summary
Fortinet has published information on vulnerabilities in FORTIOS. This advisory lists the related Siemens Industrial products. Siemens has released a new version of Fortigate NGFW for RUGGEDCOM APE1808 and recommends to update to the latest version. Siemens recommends to consult and implement the workarounds provided in Fortinet’s upstream security notifications.
01:00
SIEMENS CERT
SSA-787280 V1.0: Unlocked Bootloader Vulnerability in SINAMICS S200
Title
SSA-787280 V1.0: Unlocked Bootloader Vulnerability in SINAMICS S200
Published
March 11, 2025, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/html/ssa-787280.html
Summary
A specific range of produced SINAMICS S200 devices contains an unlocked bootloader vulnerability that could allow an attacker to download untrusted firmware that could damage or compromise the device. For delivered products listed below Siemens recommends countermeasures.
01:00
SIEMENS CERT
SSA-770770 V1.1 (Last Update: 2025-03-11): Multiple Vulnerabilities in Fortigate NGFW on RUGGEDCOM APE1808 Devices
Title
SSA-770770 V1.1 (Last Update: 2025-03-11): Multiple Vulnerabilities in Fortigate NGFW on RUGGEDCOM APE1808 Devices
Published
March 11, 2025, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/html/ssa-770770.html
Summary
Fortinet has published information on vulnerabilities in FortiOS. This advisory lists the related Siemens Industrial products. Siemens is preparing fix versions and recommends to consult and implement the workarounds provided in Fortinet’s upstream security notifications.
01:00
SIEMENS CERT
SSA-767615 V1.1 (Last Update: 2025-03-11): Information Disclosure Vulnerability in SIPROTEC 5 Devices
Title
SSA-767615 V1.1 (Last Update: 2025-03-11): Information Disclosure Vulnerability in SIPROTEC 5 Devices
Published
March 11, 2025, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/html/ssa-767615.html
Summary
An information disclosure vulnerability in SIPROTEC 5 devices could allow an unauthenticated, remote attacker to retrieve sensitive information of the device. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens is preparing further fix versions and recommends specific countermeasures for products ...
01:00
SIEMENS CERT
SSA-723487 V1.5 (Last Update: 2025-03-11): RADIUS Protocol Susceptible to Forgery Attacks (CVE-2024-3596) - Impact to SCALANCE,...
Title
SSA-723487 V1.5 (Last Update: 2025-03-11): RADIUS Protocol Susceptible to Forgery Attacks (CVE-2024-3596) - Impact to SCALANCE, RUGGEDCOM and Related Products
Published
March 11, 2025, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/html/ssa-723487.html
Summary
This advisory documents the impact of CVE-2024-3596 (also dubbed “Blastradius”), a vulnerability in the RADIUS protocol, to SCALANCE, RUGGEDCOM and related products. The vulnerability could allow on-path attackers, located between a Network Access Server (the RADIUS client, e.g., SCALANCE or RUGGEDCOM devices) and a RADIUS server (e.g., SINEC INS), to ...
01:00
SIEMENS CERT
SSA-620288 V1.3 (Last Update: 2025-03-11): Multiple Vulnerabilities (NUCLEUS:13) in Capital Embedded AR Classic
Title
SSA-620288 V1.3 (Last Update: 2025-03-11): Multiple Vulnerabilities (NUCLEUS:13) in Capital Embedded AR Classic
Published
March 11, 2025, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/html/ssa-620288.html
Summary
Multiple vulnerabilities (also known as “NUCLEUS:13”) have be identified in the Nucleus RTOS (real-time operating system) and reported in the Siemens Security Advisory SSA-044112: https://cert-portal.siemens.com/productcert/html/ssa-044112.html. Capital Embedded AR Classic uses an affected version of the Nucleus software and inherently contains several of these vulnerabilities. Siemens has released a new version ...
01:00
SIEMENS CERT
SSA-615740 V1.0: Multiple Vulnerabilities in SINEMA Remote Connect Client Before V3.2 SP3
Title
SSA-615740 V1.0: Multiple Vulnerabilities in SINEMA Remote Connect Client Before V3.2 SP3
Published
March 11, 2025, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/html/ssa-615740.html
Summary
SINEMA Remote Connect Client before V3.2 SP3 is affected by multiple vulnerabilities. Siemens has released a new version for SINEMA Remote Connect Client and recommends to update to the latest version.
01:00
SIEMENS CERT
SSA-515903 V1.0: Multiple Vulnerabilities in SiPass integrated AC5102 / ACC-G2 and ACC-AP
Title
SSA-515903 V1.0: Multiple Vulnerabilities in SiPass integrated AC5102 / ACC-G2 and ACC-AP
Published
March 11, 2025, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/html/ssa-515903.html
Summary
SiPass integrated ACC (Advanced Central Controller) devices contain multiple vulnerabilities that could allow attackers to execute commands on the devices with root privileges and access sensitive data. Siemens has released new versions for the affected products and recommends to update to the latest versions.
01:00
SIEMENS CERT
SSA-507653 V1.0: Improper Access Control Vulnerabilities in Tecnomatix Plant Simulation
Title
SSA-507653 V1.0: Improper Access Control Vulnerabilities in Tecnomatix Plant Simulation
Published
March 11, 2025, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/html/ssa-507653.html
Summary
Siemens Tecnomatix Plant Simulation do not properly limit the access of the simulation model to the filesystem. This could allow an unauthorized attacker to read or delete arbitrary files or the entire filesystem of the device. Siemens has released new versions for the affected products and recommends to update to ...
01:00
SIEMENS CERT
SSA-503939 V1.0: Vulnerabilities in the BIOS of the SIMATIC S7-1500 TM MFP
Title
SSA-503939 V1.0: Vulnerabilities in the BIOS of the SIMATIC S7-1500 TM MFP
Published
March 11, 2025, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/html/ssa-503939.html
Summary
Multiple vulnerabilities have been identified in the BIOS of the SIMATIC S7-1500 TM MFP. Siemens is preparing fix versions and recommends specific countermeasures for products where fixes are not, or not yet available.
01:00
SIEMENS CERT
SSA-434032 V1.2 (Last Update: 2025-03-11): Input Validation Vulnerability in the DHCP Client of Nucleus RTOS
Title
SSA-434032 V1.2 (Last Update: 2025-03-11): Input Validation Vulnerability in the DHCP Client of Nucleus RTOS
Published
March 11, 2025, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/html/ssa-434032.html
Summary
The DHCP implementation of the networking component (Nucleus NET) in Nucleus Real-Time Operating System (RTOS) contains a vulnerability that could allow an attacker to change the IP address of an affected device to an invalid value. Siemens has released new versions for several affected products and recommends to update to ...
01:00
SIEMENS CERT
SSA-398330 V2.4 (Last Update: 2025-03-11): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 151...
Title
SSA-398330 V2.4 (Last Update: 2025-03-11): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1
Published
March 11, 2025, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/html/ssa-398330.html
Summary
Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version V3.1 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant). These GNU/Linux vulnerabilities have been externally identified. Siemens is preparing fix versions and recommends specific countermeasures for products where fixes are not, or not ...
  • 1 (current)
  • 2

Last Updates

BOSCH PSIRT
15.01.2025
SIEMENS CERT
11.03.2025
US CERT
19.02.2025
US CERT (ICS)
11.03.2025

By Source

Archive

2025
2024
2023
2022
2021
2020
2019
2018
2017

Feeds