April 2022
12.04.2022
SIEMENS CERT
SSA-446448 V1.0: Denial of Service Vulnerability in PROFINET Stack Integrated on Interniche Stack
Titel
SSA-446448 V1.0: Denial of Service Vulnerability in PROFINET Stack Integrated on Interniche Stack
Veröffentlicht
12. April 2022 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-446448.pdf
Text
The PROFINET (PNIO) stack, when integrated with the Interniche IP stack, contains a vulnerability that could allow an attacker to cause a denial of service condition on affected industrial products. Siemens has released updates for several affected products and recommends to update to the latest versions. Siemens is preparing further ...
12.04.2022
SIEMENS CERT
SSA-114589 V1.2 (Last Update: 2022-04-12): Multiple Vulnerabilities in Nucleus RTOS based APOGEE, TALON and Desigo PXC/PXM Prod...
Titel
SSA-114589 V1.2 (Last Update: 2022-04-12): Multiple Vulnerabilities in Nucleus RTOS based APOGEE, TALON and Desigo PXC/PXM Products
Veröffentlicht
12. April 2022 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-114589.pdf
Text
Multiple vulnerabilities (also known as “NUCLEUS:13”) have be identified in the Nucleus RTOS (real-time operating system) and reported in the Siemens Security Advisory SSA-044112: https://cert-portal.siemens.com/productcert/pdf/ssa-044112.pdf. The products listed below use affected versions of the Nucleus software and inherently contain these vulnerabilities. Siemens has released updates for several affected products and ...
12.04.2022
SIEMENS CERT
SSA-162506 V1.2 (Last Update: 2022-04-12): DHCP Client Vulnerability in SIMOTICS CONNECT 400, Desigo PXC/PXM, APOGEE MEC/MBC/PX...
Titel
SSA-162506 V1.2 (Last Update: 2022-04-12): DHCP Client Vulnerability in SIMOTICS CONNECT 400, Desigo PXC/PXM, APOGEE MEC/MBC/PXC, APOGEE PXC Series, and TALON TC Series
Veröffentlicht
12. April 2022 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-162506.pdf
Text
SIMOTICS CONNECT 400, Desigo (Power PC-based), APOGEE MEC/MBC/PXC and TALON TC products are affected by a DHCP Client vulnerability as initially reported in SSA-434032 for the Mentor Nucleus Networking Module. Siemens has released updates for several affected products and recommends to update to the latest versions. Siemens recommends countermeasures for ...
März 2022
28.03.2022
SIEMENS CERT
SSA-593272 V1.5 (Last Update: 2022-03-28): SegmentSmack in Interniche IP-Stack based Industrial Devices
Titel
SSA-593272 V1.5 (Last Update: 2022-03-28): SegmentSmack in Interniche IP-Stack based Industrial Devices
Veröffentlicht
28. März 2022 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-593272.pdf
Text
A vulnerability exists in affected products that could allow remote attackers to affect the availability of the devices under certain conditions. The underlying TCP stack can be forced to make very computation expensive calls for every incoming packet which can lead to a Denial-of-Service.
11.03.2022
SIEMENS CERT
SSA-764417 V1.1 (Last Update: 2022-03-11): Multiple Vulnerabilities in RUGGEDCOM Devices
Titel
SSA-764417 V1.1 (Last Update: 2022-03-11): Multiple Vulnerabilities in RUGGEDCOM Devices
Veröffentlicht
11. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-764417.pdf
Text
There is an insecure cryptographic vulnerability for the affected RUGGEDCOM devices. If an attacker were to exploit this, they could gain privileged functions. Siemens recommends specific countermeasures for products where updates are not, or not yet available.
11.03.2022
SIEMENS CERT
SSA-256353 V1.1 (Last Update: 2022-03-11): Third-Party Component Vulnerabilities in RUGGEDCOM ROS
Titel
SSA-256353 V1.1 (Last Update: 2022-03-11): Third-Party Component Vulnerabilities in RUGGEDCOM ROS
Veröffentlicht
11. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-256353.pdf
Text
Multiple vulnerabilities affect various third-party components of the RUGGEDCOM ROS, and a cross-site scripting exploit. If exploited, an attacker could cause a denial-of-service, act as a man-in-the-middle or retrieval of sensitive information or gain privileged functions. Siemens has released updates for several affected products and recommends to update to the ...
11.03.2022
SIEMENS CERT
SSA-593272 V1.4 (Last Update: 2022-03-11): SegmentSmack in Interniche IP-Stack based Industrial Devices
Titel
SSA-593272 V1.4 (Last Update: 2022-03-11): SegmentSmack in Interniche IP-Stack based Industrial Devices
Veröffentlicht
11. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-593272.pdf
Text
A vulnerability exists in affected products that could allow remote attackers to affect the availability of the devices under certain conditions. The underlying TCP stack can be forced to make very computation expensive calls for every incoming packet which can lead to a Denial-of-Service.
08.03.2022
SIEMENS CERT
SSA-250085 V1.0: Multiple Vulnerabilities in SINEC NMS
Titel
SSA-250085 V1.0: Multiple Vulnerabilities in SINEC NMS
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-250085.pdf
Text
SINEC NMS contains multiple vulnerabilities that could allow an attacker to execute arbitrary code on the system, arbitrary commands on the local database or achieve privilege escalation. Siemens recommends specific countermeasures for products where updates are not, or not yet available.
08.03.2022
SIEMENS CERT
SSA-252466 V1.0: Multiple Vulnerabilities in Climatix POL909 (AWM and AWB)
Titel
SSA-252466 V1.0: Multiple Vulnerabilities in Climatix POL909 (AWM and AWB)
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-252466.pdf
Text
Multiple vulnerabilities have been identified in the Climatix POL909 (AWM and AWB) that could allow an unauthenticated attacker to hijack and redirect users to a malicious webpage, or allow an authenticated attacker to access sensitive files. Siemens has released an update for the Climatix POL909 (AWM and AWB) and recommends ...
08.03.2022
SIEMENS CERT
SSA-244969 V1.2 (Last Update: 2022-03-08): OpenSSL Vulnerability in Industrial Products
Titel
SSA-244969 V1.2 (Last Update: 2022-03-08): OpenSSL Vulnerability in Industrial Products
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-244969.pdf
Text
OpenSSL has published a security advisory [0] about a vulnerability in OpenSSL versions 1.1.1 < 1.1.1l and 1.0.2 < 1.0.2za that allows an attacker to cause a denial of service (DoS) or to disclose private memory content. Siemens has released updates for several affected products and recommends to update to ...
08.03.2022
SIEMENS CERT
SSA-223353 V1.0: Multiple Vulnerabilities in Nucleus RTOS based SIMOTICS CONNECT 400
Titel
SSA-223353 V1.0: Multiple Vulnerabilities in Nucleus RTOS based SIMOTICS CONNECT 400
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-223353.pdf
Text
Multiple vulnerabilities (also known as “NUCLEUS:13”) have been identified in the Nucleus RTOS (real-time operating system), originally reported in the Siemens Security Advisory SSA-044112: https://cert-portal.siemens.com/productcert/pdf/ssa-044112.pdf. SIMOTICS CONNECT 400 devices are affected by some of the vulnerabilities as documented below. Siemens has released an update for the SIMOTICS CONNECT 400 and ...
08.03.2022
SIEMENS CERT
SSA-462066 V2.7 (Last Update: 2022-03-08): Vulnerability known as TCP SACK PANIC in Industrial Products
Titel
SSA-462066 V2.7 (Last Update: 2022-03-08): Vulnerability known as TCP SACK PANIC in Industrial Products
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-462066.pdf
Text
Multiple industrial products are affected by a vulnerability in the kernel known as TCP SACK PANIC. The vulnerability could allow a remote attacker to cause a denial of service condition. Siemens has released updates for several affected products and recommends to update to the new versions. Siemens is preparing further ...
08.03.2022
SIEMENS CERT
SSA-594438 V1.0: Remote Code Execution and Denial-of-Service Vulnerability in multiple RUGGEDCOM ROX products
Titel
SSA-594438 V1.0: Remote Code Execution and Denial-of-Service Vulnerability in multiple RUGGEDCOM ROX products
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-594438.pdf
Text
A vulnerability in the RUGGEDCOM ROX devices’ third party component, NSS, could allow an attacker to remotely execute code or cause a denial-of-service condition due to the way it verifies security certificates. Siemens has released updates for the affected products and recommends to update to the latest versions.
08.03.2022
SIEMENS CERT
SSA-415938 V1.0: Improper Access Control Vulnerability in Mendix
Titel
SSA-415938 V1.0: Improper Access Control Vulnerability in Mendix
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-415938.pdf
Text
A vulnerability in Mendix Studio Pro was discovered, that, if acted upon by a malicious user, could allow to retrieve the status of a job run by another user in certain cases. Mendix has released updates for the affected product lines, recommends to update to the latest versions and to ...
08.03.2022
SIEMENS CERT
SSB-439005 V4.1 (Last Update: 2022-03-08): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 151...
Titel
SSB-439005 V4.1 (Last Update: 2022-03-08): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssb-439005.pdf
Text
08.03.2022
SIEMENS CERT
SSA-669158 V1.1 (Last Update: 2022-03-08): DNS Client Vulnerabilities in SIMOTICS CONNECT 400
Titel
SSA-669158 V1.1 (Last Update: 2022-03-08): DNS Client Vulnerabilities in SIMOTICS CONNECT 400
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-669158.pdf
Text
SIMOTICS CONNECT 400 is affected by DNS Client vulnerabilities as initially reported in Siemens Security Advisory SSA-705111 (https://cert-portal.siemens.com/productcert/pdf/ssa-705111.pdf) for the DNS Module in Nucleus RTOS. Siemens has released updates for the SIMOTICS CONNECT 400 and recommends to update to the latest version.
08.03.2022
SIEMENS CERT
SSA-669737 V1.1 (Last Update: 2022-03-08): Improper Access Control Vulnerability in SICAM TOOLBOX II
Titel
SSA-669737 V1.1 (Last Update: 2022-03-08): Improper Access Control Vulnerability in SICAM TOOLBOX II
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-669737.pdf
Text
SICAM TOOLBOX II contains a vulnerability that could allow an attacker access through a circumventable access control. Siemens is preparing updates and recommends countermeasures for products where updates are not, or not yet available.
08.03.2022
SIEMENS CERT
SSA-389290 V1.0: Third-Party Component Vulnerabilities in SINEC INS
Titel
SSA-389290 V1.0: Third-Party Component Vulnerabilities in SINEC INS
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-389290.pdf
Text
71 vulnerabilities in third-party components as Node.js, cURL, SQLite, CivetWeb and DNS(ISC BIND) could allow an attacker to interfere with the affected product in various ways. Siemens has released an update for SINEC INS and recommends to update to the latest versions.
08.03.2022
SIEMENS CERT
SSA-256353 V1.0: Third-Party Component Vulnerabilities in RUGGEDCOM ROS
Titel
SSA-256353 V1.0: Third-Party Component Vulnerabilities in RUGGEDCOM ROS
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-256353.pdf
Text
Multiple vulnerabilities affect various third-party components of the RUGGEDCOM ROS, and a cross-site scripting exploit. If exploited, an attacker could cause a denial-of-service, act as a man-in-the-middle or retrieval of sensitive information or gain privileged functions. Siemens is preparing updates and recommends countermeasures for products where updates are not, or ...
08.03.2022
SIEMENS CERT
SSA-764417 V1.0: Multiple Vulnerabilities in RUGGEDCOM Devices
Titel
SSA-764417 V1.0: Multiple Vulnerabilities in RUGGEDCOM Devices
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-764417.pdf
Text
There is an insecure cryptographic vulnerability for the affected RUGGEDCOM devices. If an attacker were to exploit this, they could gain privileged functions. See auto-generated summary suggestion from build
08.03.2022
SIEMENS CERT
SSA-155599 V1.0: File Parsing Vulnerabilities in COMOS
Titel
SSA-155599 V1.0: File Parsing Vulnerabilities in COMOS
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-155599.pdf
Text
COMOS uses Drawings SDK from Open Design Alliance that is affected by multiple vulnerabilities that could be triggered when the application reads files in DGN, DXF or DWG file formats. If a user is tricked to open a malicious file with the affected application, an attacker could leverage the vulnerability ...
08.03.2022
SIEMENS CERT
SSA-301589 V1.1 (Last Update: 2022-03-08): Multiple File Parsing Vulnerabilities in Solid Edge, JT2Go and Teamcenter Visualization
Titel
SSA-301589 V1.1 (Last Update: 2022-03-08): Multiple File Parsing Vulnerabilities in Solid Edge, JT2Go and Teamcenter Visualization
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-301589.pdf
Text
Siemens has released updates for Solid Edge and Teamcenter Visualization to fix multiple file parsing vulnerabilities. If a user is tricked to open a malicious file (crafted as PDF, DXF or PAR) with any of the affected products, this could lead the application to crash or potentially lead to arbitrary ...
08.03.2022
SIEMENS CERT
SSA-134279 V1.0: Vulnerability in Mendix Forgot Password Appstore module
Titel
SSA-134279 V1.0: Vulnerability in Mendix Forgot Password Appstore module
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-134279.pdf
Text
Mendix Forgot Password Appstore module contains two vulnerabilities that could allow unauthorized users to take over accounts. Mendix has released an update for the Mendix Forgot Password Appstore module and recommends to update to the latest version.
08.03.2022
SIEMENS CERT
SSA-306654 V1.1 (Last Update: 2022-03-08): Insyde BIOS Vulnerabilities in Siemens Industrial Products
Titel
SSA-306654 V1.1 (Last Update: 2022-03-08): Insyde BIOS Vulnerabilities in Siemens Industrial Products
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-306654.pdf
Text
Insyde has published information on vulnerabilities in Insyde BIOS in February 2022. This advisory lists the Siemens Industrial products affected by these vulnerabilities. Siemens is preparing updates and recommends specific countermeasures for products where updates are not, or not yet available.
08.03.2022
SIEMENS CERT
SSA-840188 V1.2 (Last Update: 2022-03-08): Multiple Vulnerabilities in SIMATIC WinCC Affecting Other SIMATIC Software Products
Titel
SSA-840188 V1.2 (Last Update: 2022-03-08): Multiple Vulnerabilities in SIMATIC WinCC Affecting Other SIMATIC Software Products
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-840188.pdf
Text
Multiple vulnerabilities were found in SIMATIC WinCC that ultimately could allow local or remote attackers to escalate privileges and read, write or delete critical files. Siemens has released updates for several affected products and recommends to update to the latest versions. Siemens is preparing further updates and recommends specific countermeasures ...

Letzte Updates

BOSCH PSIRT
21.08.2024
SIEMENS CERT
12.09.2024
US CERT
19.09.2024
US CERT (ICS)
19.09.2024

Nach Quelle

Archiv

2024
2023
2022
2021
2020
2019
2018
2017

Feeds