Bulletins | CERT@VDE

SSA-346262 (Last Update: 2019-01-08): Denial-of-Service in Industrial Products

Titel

SSA-346262 (Last Update: 2019-01-08): Denial-of-Service in Industrial Products

Veröffentlicht

8. Januar 2019 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-346262.pdf

Text

Several industrial products are affected by a vulnerability that could allow remote attackers to conduct a Denial-of-Service (DoS) attack by sending specially crafted packets to port 161/udp (SNMP). Siemens has released updates for several affected products, and recommends that customers update to the new version. Siemens is preparing further updates ...

SSA-325546 (Last Update: 2019-01-08): Denial-of-Service Vulnerabilities in EN100 Ethernet Communication Module of SWT3000

Titel

SSA-325546 (Last Update: 2019-01-08): Denial-of-Service Vulnerabilities in EN100 Ethernet Communication Module of SWT3000

Veröffentlicht

8. Januar 2019 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-325546.pdf

Text

The firmware variant IEC 61850 of the EN100 Ethernet communication module for SWT 3000 is affected by security vulnerabilities which could allow an attacker to conduct a Denial-of-Service attack over the network. Siemens has released updates for several affected products, is working on updates for the remaining affected products, and ...

SSA-180635 (Last Update: 2019-01-08): Denial-of-Service Vulnerabilities in S7-1500 CPU

Titel

SSA-180635 (Last Update: 2019-01-08): Denial-of-Service Vulnerabilities in S7-1500 CPU

Veröffentlicht

8. Januar 2019 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-180635.pdf

Text

Older versions of the S7-1500 CPU are affected by two Denial-of-Service vulnerabilities. Siemens has released updates for the currently supported hardware versions.

SSA-348629 (Last Update: 2019-01-08): Denial-of-Service Vulnerability in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Pr...

Titel

SSA-348629 (Last Update: 2019-01-08): Denial-of-Service Vulnerability in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Professional and SIMATIC NET PC Software

Veröffentlicht

8. Januar 2019 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-348629.pdf

Text

A Denial-of-Service vulnerability has been identified in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Professional and SIMATIC NET PC-Software. Siemens has released updates for several affected products and recommends that customers update to the new version. Siemens is preparing further updates and recommends specific countermeasures until patches are available.

SSA-592007 (Last Update: 2019-01-08): Denial-of-Service Vulnerability in Industrial Products

Titel

SSA-592007 (Last Update: 2019-01-08): Denial-of-Service Vulnerability in Industrial Products

Veröffentlicht

8. Januar 2019 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-592007.pdf

Text

Several industrial controllers are affected by a security vulnerability that could allow an attacker to cause a Denial-of-Service condition via PROFINET DCP network packets under certain circumstances. Precondition for this scenario is a direct OSI Layer 2 access to the affected products. PROFIBUS interfaces are not affected. Siemens has released ...

SSA-181018 (Last Update: 2019-01-08): Heap Overflow Vulnerability in SCALANCE X switches, RUGGEDCOM WiMAX, RFID 181-EIP, and SI...

Titel

SSA-181018 (Last Update: 2019-01-08): Heap Overflow Vulnerability in SCALANCE X switches, RUGGEDCOM WiMAX, RFID 181-EIP, and SIMATIC RF182C

Veröffentlicht

8. Januar 2019 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-181018.pdf

Text

SCALANCE X switches, RUGGEDCOM WiMAX, RFID 181-EIP, and SIMATIC RF182C are affected by a vulnerability that could allow an unprivileged attacker located in the same local network segment (OSI Layer 2) to gain system privileges by sending a specially crafted DHCP response to a client's DHCP request. Siemens has released ...

SSB-439005 (Last Update: 2019-01-08): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-...

Titel

SSB-439005 (Last Update: 2019-01-08): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP

Veröffentlicht

8. Januar 2019 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssb-439005.pdf

Text

SSA-579309 (Last Update: 2019-01-08): Denial-of-Service in SICAM A8000 Series

Titel

SSA-579309 (Last Update: 2019-01-08): Denial-of-Service in SICAM A8000 Series

Veröffentlicht

8. Januar 2019 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-579309.pdf

Text

The SICAM A8000 RTU series is affected by a security vulnerability that could allow unauthenticated remote users to cause a Denial-of-Service (DoS) condition of the web server of affected products. Siemens has released updates for all product variants and recommends that customers update to the new versions.

SSA-535640 (Last Update: 2019-01-08): Vulnerability in Industrial Products

Titel

SSA-535640 (Last Update: 2019-01-08): Vulnerability in Industrial Products

Veröffentlicht

8. Januar 2019 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-535640.pdf

Text

Various industrial products use the Discovery Service of the OPC UA protocol stack by the OPC foundation https://github.com/OPCFoundation/UA-.NETStandard and could therefore be affected by the remote resource consumption attacks (CVE-2017-12069).

SSA-293562 (Last Update: 2019-01-08): Vulnerabilities in Industrial Products

Titel

SSA-293562 (Last Update: 2019-01-08): Vulnerabilities in Industrial Products

Veröffentlicht

8. Januar 2019 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-293562.pdf

Text

Several industrial devices are affected by two vulnerabilities that could allow an attacker to cause a Denial-of-Service condition via PROFINET DCP network packets under certain circumstances. The precondition for this scenario is a direct layer 2 access to the affected products. PROFIBUS interfaces are not affected. Siemens has released updates ...

Dezember 2018

17.12.2018

SSA-982399 (Last Update: 2018-12-17): Missing Authentication in TIM 1531 IRC Modules

Titel

SSA-982399 (Last Update: 2018-12-17): Missing Authentication in TIM 1531 IRC Modules

Veröffentlicht

17. Dezember 2018 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-982399.pdf

Text

The latest update for TIM 1531 IRC fixes a vulnerability. The devices was missing proper authentication when connecting on port 102/tcp, although configured. An attacker needs to be able to connect to port 102/tcp of an affected device in order to exploit this vulnerability. The vulnerability could allow an attacker ...

SSA-982399 (Last Update: 2018-12-13): Missing Authentication in TIM 1531 IRC Modules

Titel

SSA-982399 (Last Update: 2018-12-13): Missing Authentication in TIM 1531 IRC Modules

Veröffentlicht

13. Dezember 2018 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-982399.pdf

Text

TIM 1531 IRC is affected by a vulnerability. The devices are missing proper authentication when connecting on port 102/tcp, although configured. An attacker needs to be able to connect to port 102/tcp of an affected device in order to exploit this vulnerability. The vulnerability could allow an attacker to perform ...

SSA-181018 (Last Update: 2018-12-13): Heap Overflow Vulnerability in SCALANCE X switches, RUGGEDCOM WiMAX, RFID 181-EIP, and SI...

Titel

SSA-181018 (Last Update: 2018-12-13): Heap Overflow Vulnerability in SCALANCE X switches, RUGGEDCOM WiMAX, RFID 181-EIP, and SIMATIC RF182C

Veröffentlicht

13. Dezember 2018 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-181018.pdf

Text

SSA-293562 (Last Update: 2018-12-13): Vulnerabilities in Industrial Products

Titel

SSA-293562 (Last Update: 2018-12-13): Vulnerabilities in Industrial Products

Veröffentlicht

13. Dezember 2018 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-293562.pdf

Text

SSA-348629 (Last Update: 2018-12-13): Denial-of-Service Vulnerability in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Pr...

Titel

SSA-348629 (Last Update: 2018-12-13): Denial-of-Service Vulnerability in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Professional and SIMATIC NET PC Software

Veröffentlicht

13. Dezember 2018 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-348629.pdf

Text

SSA-674165 (Last Update: 2018-12-11): Vulnerability in McAfee MACC product for SINAMICS PERFECT HARMONY GH180 drives

Titel

SSA-674165 (Last Update: 2018-12-11): Vulnerability in McAfee MACC product for SINAMICS PERFECT HARMONY GH180 drives

Veröffentlicht

11. Dezember 2018 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-674165.pdf

Text

McAfee has issued Security Bulletin SB10250 to address a vulnerabilty in McAfee Application and Change Control (MACC). SINAMICS PERFECT HARMONY GH180 Drives with HMIs produced between November 4th, 2015 and October 9th, 2018, use MACC as part of their software package, if option A30 was part of the order. Siemens ...

SSA-982399 (Last Update: 2018-12-11): Missing Authentication in TIM 1531 IRC Modules

Titel

SSA-982399 (Last Update: 2018-12-11): Missing Authentication in TIM 1531 IRC Modules

Veröffentlicht

11. Dezember 2018 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-982399.pdf

Text

SSA-268644 (Last Update: 2018-12-11): Spectre-NG (Variants 3a and 4) Vulnerabilities in Industrial Products

Titel

SSA-268644 (Last Update: 2018-12-11): Spectre-NG (Variants 3a and 4) Vulnerabilities in Industrial Products

Veröffentlicht

11. Dezember 2018 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-268644.pdf

Text

Security researchers published information on vulnerabilities known as Spectre-NG (Variants 3a and 4). These vulnerabilities affect many modern processors from different vendors to a varying degree. Several Industrial Products include affected processors and are affected by the vulnerabilities.

SSA-293562 (Last Update: 2018-12-11): Vulnerabilities in Industrial Products

Titel

SSA-293562 (Last Update: 2018-12-11): Vulnerabilities in Industrial Products

Veröffentlicht

11. Dezember 2018 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-293562.pdf

Text

Several industrial devices are affected by two vulnerabilities that could allow an attacker to cause a Denial-of-Service condition via PROFINET DCP network packets under certain circumstances. Precondition for this scenario is a direct Layer 2 access to the affected products. PROFIBUS interfaces are not affected. Siemens has released updates for ...

SSA-348629 (Last Update: 2018-12-11): Denial-of-Service Vulnerability in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Pr...

Titel

SSA-348629 (Last Update: 2018-12-11): Denial-of-Service Vulnerability in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Professional and SIMATIC NET PC Software

Veröffentlicht

11. Dezember 2018 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-348629.pdf

Text

SSA-181018 (Last Update: 2018-12-11): Heap Overflow Vulnerability in SCALANCE X switches, RUGGEDCOM WiMAX, RFID 181-EIP, and SI...

Titel

SSA-181018 (Last Update: 2018-12-11): Heap Overflow Vulnerability in SCALANCE X switches, RUGGEDCOM WiMAX, RFID 181-EIP, and SIMATIC RF182C

Veröffentlicht

11. Dezember 2018 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-181018.pdf

Text

SSA-170881 (Last Update: 2018-12-11): Vulnerabilities in SINUMERIK Controllers

Titel

SSA-170881 (Last Update: 2018-12-11): Vulnerabilities in SINUMERIK Controllers

Veröffentlicht

11. Dezember 2018 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-170881.pdf

Text

The latest updates for SINUMERIK controllers fix multiple security vulnerabilities that could allow an attacker to cause Denial-of-Service conditions, escalate privileges, or to execute code from remote. Siemens has released updates for several affected products, is working on updates for the remaining affected products and recommends specific countermeasures until fixes ...

SSA-635129 (Last Update: 2018-12-11): Denial-of-Service Vulnerabilities in EN100 Ethernet Communication Module and SIPROTEC 5 r...

Titel

SSA-635129 (Last Update: 2018-12-11): Denial-of-Service Vulnerabilities in EN100 Ethernet Communication Module and SIPROTEC 5 relays

Veröffentlicht

11. Dezember 2018 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-635129.pdf

Text

The EN100 Ethernet communication module and SIPROTEC 5 relays are affected by security vulnerabilities which could allow an attacker to conduct a Denial-of-Service attack over the network. Siemens has released updates for several affected products, is working on updates for the remaining affected products, and recommends specific countermeasures until fixes ...

SSA-254686 (Last Update: 2018-12-11): Foreshadow / L1 Terminal Fault Vulnerabilities in Industrial Products

Titel

SSA-254686 (Last Update: 2018-12-11): Foreshadow / L1 Terminal Fault Vulnerabilities in Industrial Products

Veröffentlicht

11. Dezember 2018 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-254686.pdf

Text

Security researchers published information on vulnerabilities known as Foreshadow and L1 Terminal Fault (L1TF). These vulnerabilities affect many modern processors from different vendors to a varying degree. Several Siemens Industrial Products contain processors that are affected by the vulnerabilities.