VDE-2021-044 | CERT@VDE

2022-01-20 09:06 (CET) VDE-2021-044

Endress+Hauser: Multiple products affected by log4net vulnerability

Share: Email | Twitter

ID

VDE-2021-044

Published

2022-01-20 09:06 (CET)

Last update

2022-01-20 09:06 (CET)

Vendor(s)

Endress+Hauser AG

Product(s)

Article No°	Product Name	Affected Version(s)
SFE100	DeviceCare	<= 1.07.03
	DTM for Cerabar / 5xB/7xB / HART	<= 1.67.0.805
	DTM for CLD18 / CI / CDI	<= 1.2.0.0
	DTM for CM14 / CC / CDI	<= 1.2.0.0
	DTM for CM14 / CI / CDI	<= 1.2.0.0
	DTM for CM14 / DO / CDI	<= 1.2.0.0
	DTM for CM14 / pH / CDI	<= 1.2.0.0
	DTM for Deltabar / 5xB/7xB / HART	<= 1.67.0.805
	DTM for Display / RID1x / CDI	<= 1.1.1.400
	DTM for Dosimag / 5BH / CDI	<= 1.4.0.64
	DTM for Dosimag / 5BH / MR4	<= 1.4.1.78
	DTM for Dosimass / 8BE / CDI	<= 1.4.0.112
	DTM for Dosimass / 8BE / MR4	<= 1.4.1.121
	DTM for Ecograph T / RSG35 / CDI	<= 2.4.0.0
	DTM for EngyCal / RH33 / CDI	<= 1.7.0.5
	DTM for EngyCal / RS33 / CDI	<= 1.1.6.3352
	DTM for Fieldgate /SFG500 / Profibus	<= 1.10.00
	DTM for FXA195 / HART	<= 1.0.57
	DTM for Gammapilot 5x / FMG50 / HART	<= 1.43.0.1953
	DTM for iTEMP / TMT142B / HART	<= 3.1.4.795
	DTM for iTEMP / TMT162 / HART	<= 1.13.132.5451
	DTM for iTEMP / TMT71 / CDI	<= 1.13.18.5253
	DTM for iTEMP / TMT72 / HART	<= 1.13.258.2304
	DTM for iTEMP / TMT82 / HART	<= 1.10.423.4213
	DTM for iTEMP / TMT82 / HART	<= 1.11.480.5368
	DTM for Levelflex / FMP5x / FF	<= 1.11.0.1471
	DTM for Levelflex / FMP 5x / HART	<= 1.10.1.2369
	DTM for Levelflex / FMP 5x / PA	<= 1.11.0.1017
	DTM for Liquiline CA80xx / CDI	<= 1.0.22.0
	DTM for Liquiline / CA80xx / DP	<= 1.11.0.0
	DTM for Liquiline / CM442 / CDI	<= 1.0.22.0
	DTM for Liquiline CM44x / CDI	<= 1.0.22.0
	DTM for Liquiline / CM44x / DP	<= 1.11.0.0
	DTM for Liquiline Compact / CM82 / HART	<= 1.2.0.796
	DTM for Liquiline Cond / CM42 / FF	<= 2.4.0.22
	DTM for Liquiline Cond / CM42 / HART	<= 2.4.0.22
	DTM for Liquiline Cond / CM42 / PA	<= 2.4.0.22
	DTM for Liquiline Oxygen / CM42 / FF	<= 2.4.0.22
	DTM for Liquiline Oxygen / CM42 / HART	<= 2.4.0.22
	DTM for Liquiline Oxygen / CM42 / PA	<= 2.4.0.22
	DTM for Liquiline pHORP / CM42 / FF	<= 2.4.0.22
	DTM for Liquiline pHORP / CM42 / HART	<= 2.4.0.22
	DTM for Liquiline pHORP / CM42 / PA	<= 2.4.0.22
	DTM for Liquistation / CSF22 / CDI	<= 1.0.22.0
	DTM for Liquistation / CSF48 / CDI	<= 1.0.22.0
	DTM for Liquistation CSFxx / CDI	<= 1.0.22.0
	DTM for Liquistation / CSFxx / DP	<= 1.11.0.0
	DTM for Memograph M / RSG45 / CDI	<= 2.4.0.0
	DTM for Micropilot / FMR20 / HART	<= 1.9.0.358
	DTM for Micropilot / FMR5x / FF	<= 1.11.0.745
	DTM for Micropilot / FMR5x / HART	<= 1.10.0.913
	DTM for Micropilot / FMR5x / PA	<= 1.11.0.375
	DTM for Micropilot / FMR6x / HART	<= 1.10.0.807
	DTM for Promag 100 / 5x1B / DP	<= 1.7.0.86
	DTM for Promag 100 / 5x1B / EIP	<= 1.6.0.175
	DTM for Promag 100 / 5x1B / EIP-CDIE	<= 1.5.0.174
	DTM for Promag 100 / 5x1B / HART	<= 1.3.0.201
	DTM for Promag 100 / 5x1B / MR4	<= 1.4.1.354
	DTM for Promag 100 / 5x1B / MR4-CDIS	<= 1.4.1.354
	DTM for Promag 100 / 5x1B / PNIO-CDIE	<= 1.6.0.37
	DTM for Promag 10 / 5xBB / HART	<= 1.76.0.184
	DTM for Promag 10 / 5xBB / HART-CDIS	<= 1.76.0.184
	DTM for Promag 10 / 5xBB / MR4	<= 1.76.0.159
	DTM for Promag 10 / 5xBB / MR4-CDIS	<= 1.76.0.159
	DTM for Promag 200 / 5x2B / FF	<= 1.6.0.73
	DTM for Promag 200 / 5x2B / HART	<= 1.5.0.219
	DTM for Promag 200 / 5x2B / PA	<= 1.7.0.57
	DTM for Promag 300 500 / 5x3x 5x5x / DP	<= 1.11.0.65
	DTM for Promag 300 500 / 5x3x 5x5x / EIP	<= 1.10.0.59
	DTM for Promag 300 500 / 5x3x 5x5x / EIP-CDIE	<= 1.10.0.59
	DTM for Promag 300 500 / 5x3x 5x5x / FF	<= 1.9.0.122
	DTM for Promag 300 500 / 5x3x 5x5x / HART	<= 1.39.0.285
	DTM for Promag 300 500 / 5x3x 5x5x / MR4	<= 1.39.0.230
	DTM for Promag 300 500 / 5x3x 5x5x / MR4-CDIE	<= 1.39.0.230
	DTM for Promag 300 500 / 5x3x 5x5x / PA	<= 1.11.0.104
	DTM for Promag 300 500 / 5x3x 5x5x / PA	<= 1.12.0.161
	DTM for Promag 300 500 / 5x3x 5x5x / PN-CDIE	<= 1.39.0.136
	DTM for Promag 400 / 5x4Bxx / HART	<= 1.0.0.349
	DTM for Promag 400 / 5x4C / DP	<= 1.8.0.58
	DTM for Promag 400 / 5x4C / EIP	<= 1.8.0.101
	DTM for Promag 400 / 5x4C / EIP	<= 1.3.0.84
	DTM for Promag 400 / 5x4C / HART	<= 1.3.0.132
	DTM for Promag 400 / 5x4C / HART	<= 1.39.0.276
	DTM for Promag 400 / 5x4C / MR4	<= 1.39.0.191
	DTM for Promag 400 / 5x4C / MR4-CDIE	<= 1.5.0.59
	DTM for Promag 400 / 5x4C / MR4-CDIE	<= 1.10.0.148
	DTM for Promag 400 / 5x4Cxx / HART	<= 1.0.0.32
	DTM for Promass 100 / 8x1B / DP	<= 1.7.0.141
	DTM for Promass 100 / 8x1B / EIP	<= 1.6.0.463
	DTM for Promass 100 / 8x1B / EIP-CDIE	<= 1.5.0.463
	DTM for Promass 100 / 8x1B / HART	<= 1.4.0.282
	DTM for Promass 100 / 8x1B / MB	<= 1.4.1.519
	DTM for Promass 100 / 8x1B / PNIO-CDIE	<= 1.6.0.70
	DTM for Promass 100 / 8x1Bxx / MB	<= 1.0.0.0
	DTM for Promass 100 / 8x1Bxx / MB	<= 1.4.0.513
	DTM for Promass 100 / 8x1Bxx / MR4	<= 1.2.0.476
	DTM for Promass 10 / 8xBB / HART	<= 1.76.0.271
	DTM for Promass 10 / 8xBB / HART-CDIS	<= 1.76.0.271
	DTM for Promass 10 / 8xBB / MR4	<= 1.76.0.158
	DTM for Promass 10 / 8xBB / MR4-CDIS	<= 1.76.0.158
	DTM for Promass 200 / 8x2B / FF	<= 1.3.0.150
	DTM for Promass 200 / 8x2B / HART	<= 1.5.0.1133
	DTM for Promass 200 / 8x2B / PA	<= 1.7.0.236
	DTM for Promass 300 500 / 8x3x 8x5x / DP	<= 1.11.0.93
	DTM for Promass 300 500 / 8x3x 8x5x / EIP	<= 1.10.0.94
	DTM for Promass 300 500 / 8x3x 8x5x / EIP-CDIE	<= 1.10.0.94
	DTM for Promass 300 500 / 8x3x 8x5x / FF	<= 1.9.0.197
	DTM for Promass 300 500 / 8x3x 8x5x / HART	<= 1.39.0.646
	DTM for Promass 300 500 / 8x3x 8x5x / MR4	<= 1.39.0.289
	DTM for Promass 300 500 / 8x3x 8x5x / MR4-CDIE	<= 1.39.0.289
	DTM for Promass 300 500 / 8x3x 8x5x / PA	<= 1.12.0.193
	DTM for Promass 300 500 / 8x3x 8x5x / PN-CDIE	<= 1.39.0.222
	DTM for Proservo / NMS8x / HART	<= 1.9.2.887
	DTM for Prosonic Flow 100 / 9E1B / CDI	<= 1.10.0.172
	DTM for Prosonic Flow 100 / 9E1B / HART	<= 1.10.0.151
	DTM for Prosonic Flow 300 500 / 9x3x 9x5x / HART	<= 1.45.0.327
	DTM for Prosonic Flow 300 500 / 9x3x 9x5x / MR4	<= 1.45.0.128
	DTM for Prosonic Flow 300 500 / 9x3x 9x5x / MR4-CDIE	<= 1.38.0.88
	DTM for Prosonic Flow 300 500 / 9x3x 9x5x / MR4-CDIE	<= 1.45.0.128
	DTM for Prosonic Flow B 200 / 9B2B / HART	<= 1.6.0.800
	DTM for Prothermo / NMT8x / HART	<= 1.73.0.317
	DTM for Prowirl 200 / 7x2B / FF	<= 1.11.0.174
	DTM for Prowirl 200 / 7x2B / HART	<= 1.12.0.537
	DTM for Prowirl 200 / 7x2Bxx / PA	<= 1.11.0.135
	DTM for RA33 / CDI	<= 1.1.6.3352
	DTM for Tank Gauging Radar / NMR8x / HART	<= 1.9.2.799
	DTM for Tank Side Monitor / NRF8x / HART	<= 1.9.2.669
	DTM for t-mass 150 / 6xABxx / HART	<= 1.0.0.162
	DTM for t-mass 150 L T 150 / 6xAB / HART	<= 1.2.0.42
	DTM for t-mass 300 500 / 6x3B 6x5B / HART	<= 1.45.0.280
	DTM for t-mass 300 500 / 6x3B 6x5B / MR4	<= 1.45.0.127
	DTM for t-mass 300 500 / 6x3B 6x5B / MR4-CDIE	<= 1.45.0.127
	DTM for TrustSens / TM371-TM372 / HART	<= 1.11.301.4871
	DTM library for SWA50	<= 1.0.2.4
	DTM library for SWA70	<= 1.0.2.4
	DTM library for SWG70 / WirelessHART	<= 1.0.2.4
SFE500	FieldCare	<= 2.15.01
SMT50	Field Xpert	<= 1.05.03
SMT70	Field Xpert	<= 1.05.03
SMT77	Field Xpert	<= 1.05.03
	HoP DTM	<= 1.0.2
	iDTM FF	<= 2.00.289
	iDTM HART	<= 2.00.289
	IO-Link IODD Interpreter DTM	<= 3.12.0
	OPC Server for SWG70	<= 1.00.01
	OPC UA Connectivity Server	<= 1.3.7817

Summary

Apache log4net versions before 2.0.10 do not disable XML external entities when parsing log4net configuration files. This allows for XXE-based attacks in applications that accept attacker-controlled log4net configuration files.

CVE ID

CVE-2018-1285

Last Update:

24. November 2021 09:50

Severity

9.8 (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H)

Weakness

Improper Restriction of XML External Entity Reference (CWE-611)

Summary

Details

nvd.nist.gov

Impact

To exploit the vulnerability, the access rights of an authorized user or admin are required.

The impact of the vulnerability on the affected products may result in

Denial of Service
Loss of Credentials
Code Execution

The CVSS environmental score is specific to the customer's environment and should therefore be individually assessed by the customer to accomplish final scoring.

The original CVE refers to a network access scenario. With our products, it is a local access scenario. For this reason, the risk of exploiting this vulnerability is reduced.

Solution

Mitigation

Make sure that no unauthorized access to the production environment is possible.
Avoid using the above listed software with Windows administrator privileges if other users with lower privileges have access to the same software installation.

Remediation

Endress+Hauser has provided the following updates with remediation of the vulnerability:

FieldCare Version 2.16
DeviceCare Version 1.07.05
Field Xpert Version 1.05.05
OPC UA Connectivity Server Version 1.3.7818

Further updates are currently not planned by Endress+Hauser.

Reported by

CodeWrights GmbH reported this vulnerability to ENDRESS+HAUSER.
CERT@VDE coordinated with ENDRESS+HAUSER.