März 2022
08.03.2022
US CERT (ICS)
Sensormatic PowerManage (Update A)
Titel
Sensormatic PowerManage (Update A)
Veröffentlicht
8. März 2022 16:00
URL
https://us-cert.cisa.gov/ics/advisories/icsa-22-034-01
Text
This update advisory is a follow-up to the original advisory titled ICSA-22-034-01 Sensormatic PowerManage that was published February 3, 2022, on the ICS webpage on www.cisa.gov/uscert. This advisory contains mitigations for an Improper Input Validation vulnerability in the Sensormatic PowerManage operating platform.
08.03.2022
SIEMENS CERT
SSA-594438 V1.0: Remote Code Execution and Denial-of-Service Vulnerability in multiple RUGGEDCOM ROX products
Titel
SSA-594438 V1.0: Remote Code Execution and Denial-of-Service Vulnerability in multiple RUGGEDCOM ROX products
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-594438.pdf
Text
A vulnerability in the RUGGEDCOM ROX devices’ third party component, NSS, could allow an attacker to remotely execute code or cause a denial-of-service condition due to the way it verifies security certificates. Siemens has released updates for the affected products and recommends to update to the latest versions.
08.03.2022
SIEMENS CERT
SSA-838121 V1.1 (Last Update: 2022-03-08): Multiple Denial of Service Vulnerabilities in Industrial Products
Titel
SSA-838121 V1.1 (Last Update: 2022-03-08): Multiple Denial of Service Vulnerabilities in Industrial Products
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-838121.pdf
Text
Affected SIMATIC firmware contains three vulnerabilities that could allow an unauthenticated attacker to perform a denial-of-service attack under certain conditions. Siemens is preparing updates and recommends specific countermeasures for products where updates are not, or not yet available.
08.03.2022
SIEMENS CERT
SSA-669158 V1.1 (Last Update: 2022-03-08): DNS Client Vulnerabilities in SIMOTICS CONNECT 400
Titel
SSA-669158 V1.1 (Last Update: 2022-03-08): DNS Client Vulnerabilities in SIMOTICS CONNECT 400
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-669158.pdf
Text
SIMOTICS CONNECT 400 is affected by DNS Client vulnerabilities as initially reported in Siemens Security Advisory SSA-705111 (https://cert-portal.siemens.com/productcert/pdf/ssa-705111.pdf) for the DNS Module in Nucleus RTOS. Siemens has released updates for the SIMOTICS CONNECT 400 and recommends to update to the latest version.
08.03.2022
SIEMENS CERT
SSA-562051 V1.0: Cross-Site Scripting Vulnerability in Polarion ALM
Titel
SSA-562051 V1.0: Cross-Site Scripting Vulnerability in Polarion ALM
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-562051.pdf
Text
An attacker could trigger malicious actions via a cross-site scripting vulnerability by sending crafted links to an administrator user of Polarion ALM. Siemens has released an update for the Polarion Subversion Webclient and recommends to update to the latest version.
08.03.2022
SIEMENS CERT
SSA-661247 V2.6 (Last Update: 2022-03-08): Apache Log4j Vulnerabilities (Log4Shell, CVE-2021-44228, CVE-2021-45046) - Impact to...
Titel
SSA-661247 V2.6 (Last Update: 2022-03-08): Apache Log4j Vulnerabilities (Log4Shell, CVE-2021-44228, CVE-2021-45046) - Impact to Siemens Products
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-661247.pdf
Text
On 2021-12-09, a vulnerability in Apache Log4j (a logging tool used in many Java-based applications) was disclosed, that could allow remote unauthenticated attackers to execute code on vulnerable systems. The vulnerability is tracked as CVE-2021-44228 and is also known as “Log4Shell”. On 2021-12-14 an additional denial of service vulnerability (CVE-2021-45046) ...
08.03.2022
SIEMENS CERT
SSA-534763 V1.6 (Last Update: 2022-03-08): Special Register Buffer Data Sampling (SRBDS) aka Crosstalk in Industrial Products
Titel
SSA-534763 V1.6 (Last Update: 2022-03-08): Special Register Buffer Data Sampling (SRBDS) aka Crosstalk in Industrial Products
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-534763.pdf
Text
Security researchers published information on a vulnerability known as Crosstalk (INTEL-SA-00320). This vulnerability affects modern Intel processors to a varying degree. Several Siemens Industrial Products contain processors that are affected by the vulnerability. Siemens has released updates for several affected products and recommends to update to the latest versions. Siemens ...
08.03.2022
SIEMENS CERT
SSA-148641 V1.0: XPath Constraint Vulnerability in Mendix Runtime
Titel
SSA-148641 V1.0: XPath Constraint Vulnerability in Mendix Runtime
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-148641.pdf
Text
A XPath Constraint vulnerability in the Mendix Studio Pro was discovered, that can affect the running applications. The vulnerability, if acted upon by a malicious user, could allow them the ability to dump and modify sensitive data. Mendix has released updates for the affected product lines, recommends to update to ...
08.03.2022
SIEMENS CERT
SSA-501073 V1.1 (Last Update: 2022-03-08): Vulnerabilities in Controllers CPU 1518 MFP using Intel CPUs (November 2020)
Titel
SSA-501073 V1.1 (Last Update: 2022-03-08): Vulnerabilities in Controllers CPU 1518 MFP using Intel CPUs (November 2020)
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-501073.pdf
Text
Intel has published information on vulnerabilities in Intel products in November 2020. This advisory lists the Siemens Controllers that are affected by these vulnerabilities. In this advisory we take a representative CVE from each advisory: “Intel CSME, SPS, TXE, AMT and DAL Advisory” Intel-SA-00391 is represented by CVE-2020-8744 “BIOS Advisory” ...
08.03.2022
SIEMENS CERT
SSA-337210 V1.0: Privilege Escalation Vulnerability in SINUMERIK MC
Titel
SSA-337210 V1.0: Privilege Escalation Vulnerability in SINUMERIK MC
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-337210.pdf
Text
The NC plug-in card in SINUMERIK MC contains a privilege escalation vulnerability that could allow local attackers to escalate their privileges to root. This allows full access to the device, including read and modifying G code. Siemens has released updates for the affected products and recommends to update to the ...
08.03.2022
SIEMENS CERT
SSA-306654 V1.1 (Last Update: 2022-03-08): Insyde BIOS Vulnerabilities in Siemens Industrial Products
Titel
SSA-306654 V1.1 (Last Update: 2022-03-08): Insyde BIOS Vulnerabilities in Siemens Industrial Products
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-306654.pdf
Text
Insyde has published information on vulnerabilities in Insyde BIOS in February 2022. This advisory lists the Siemens Industrial products affected by these vulnerabilities. Siemens is preparing updates and recommends specific countermeasures for products where updates are not, or not yet available.
08.03.2022
SIEMENS CERT
SSA-389290 V1.0: Third-Party Component Vulnerabilities in SINEC INS
Titel
SSA-389290 V1.0: Third-Party Component Vulnerabilities in SINEC INS
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-389290.pdf
Text
71 vulnerabilities in third-party components as Node.js, cURL, SQLite, CivetWeb and DNS(ISC BIND) could allow an attacker to interfere with the affected product in various ways. Siemens has released an update for SINEC INS and recommends to update to the latest versions.
08.03.2022
SIEMENS CERT
SSA-840188 V1.2 (Last Update: 2022-03-08): Multiple Vulnerabilities in SIMATIC WinCC Affecting Other SIMATIC Software Products
Titel
SSA-840188 V1.2 (Last Update: 2022-03-08): Multiple Vulnerabilities in SIMATIC WinCC Affecting Other SIMATIC Software Products
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-840188.pdf
Text
Multiple vulnerabilities were found in SIMATIC WinCC that ultimately could allow local or remote attackers to escalate privileges and read, write or delete critical files. Siemens has released updates for several affected products and recommends to update to the latest versions. Siemens is preparing further updates and recommends specific countermeasures ...
08.03.2022
SIEMENS CERT
SSA-406691 V1.0: Buffer Vulnerabilities in DHCP function of RUGGEDCOM ROX products
Titel
SSA-406691 V1.0: Buffer Vulnerabilities in DHCP function of RUGGEDCOM ROX products
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-406691.pdf
Text
A vulnerability in the RUGGEDCOM ROX devices’ third party component, ISC DHCP, could allow an attacker to cause a buffer overrun due to a bug when reading a stored DHCP lease containing certain option information, eventually leading to a denial-of-service condition, or cause a remote-code execution. Siemens has released updates ...
08.03.2022
SIEMENS CERT
SSA-244969 V1.2 (Last Update: 2022-03-08): OpenSSL Vulnerability in Industrial Products
Titel
SSA-244969 V1.2 (Last Update: 2022-03-08): OpenSSL Vulnerability in Industrial Products
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-244969.pdf
Text
OpenSSL has published a security advisory [0] about a vulnerability in OpenSSL versions 1.1.1 < 1.1.1l and 1.0.2 < 1.0.2za that allows an attacker to cause a denial of service (DoS) or to disclose private memory content. Siemens has released updates for several affected products and recommends to update to ...
08.03.2022
SIEMENS CERT
SSA-301589 V1.1 (Last Update: 2022-03-08): Multiple File Parsing Vulnerabilities in Solid Edge, JT2Go and Teamcenter Visualization
Titel
SSA-301589 V1.1 (Last Update: 2022-03-08): Multiple File Parsing Vulnerabilities in Solid Edge, JT2Go and Teamcenter Visualization
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-301589.pdf
Text
Siemens has released updates for Solid Edge and Teamcenter Visualization to fix multiple file parsing vulnerabilities. If a user is tricked to open a malicious file (crafted as PDF, DXF or PAR) with any of the affected products, this could lead the application to crash or potentially lead to arbitrary ...
08.03.2022
SIEMENS CERT
SSA-541018 V1.5 (Last Update: 2022-03-08): Embedded TCP/IP Stack Vulnerabilities (AMNESIA:33) in SENTRON PAC / 3VA Devices (Par...
Titel
SSA-541018 V1.5 (Last Update: 2022-03-08): Embedded TCP/IP Stack Vulnerabilities (AMNESIA:33) in SENTRON PAC / 3VA Devices (Part 2)
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-541018.pdf
Text
Security researchers discovered and disclosed 33 vulnerabilities in several open-source TCP/IP stacks for embedded devices, also known as “AMNESIA:33” vulnerabilities. This advisory describes the impact of two of these vulnerabilities (CVE-2020-13987, CVE-2020-17437) to Siemens products. Siemens has released updates for several affected products and recommends to update to the latest ...
08.03.2022
SIEMENS CERT
SSA-250085 V1.0: Multiple Vulnerabilities in SINEC NMS
Titel
SSA-250085 V1.0: Multiple Vulnerabilities in SINEC NMS
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-250085.pdf
Text
SINEC NMS contains multiple vulnerabilities that could allow an attacker to execute arbitrary code on the system, arbitrary commands on the local database or achieve privilege escalation. Siemens recommends specific countermeasures for products where updates are not, or not yet available.
08.03.2022
SIEMENS CERT
SSA-415938 V1.0: Improper Access Control Vulnerability in Mendix
Titel
SSA-415938 V1.0: Improper Access Control Vulnerability in Mendix
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-415938.pdf
Text
A vulnerability in Mendix Studio Pro was discovered, that, if acted upon by a malicious user, could allow to retrieve the status of a job run by another user in certain cases. Mendix has released updates for the affected product lines, recommends to update to the latest versions and to ...
08.03.2022
SIEMENS CERT
SSB-439005 V4.1 (Last Update: 2022-03-08): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 151...
Titel
SSB-439005 V4.1 (Last Update: 2022-03-08): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssb-439005.pdf
Text
08.03.2022
SIEMENS CERT
SSA-703715 V1.1 (Last Update: 2022-03-08): Information Disclosure Vulnerability in Climatix POL909 (AWM and AWB)
Titel
SSA-703715 V1.1 (Last Update: 2022-03-08): Information Disclosure Vulnerability in Climatix POL909 (AWM and AWB)
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-703715.pdf
Text
Climatix POL909 (AWM and AWB) contains an information disclosure vulnerability that could allow a man-in-the-middle attacker to read sensitive data, such as administrator credentials, or modify data in transit. Siemens has released an update for Climatix POL909 (AWM and AWB) and recommends to update to the latest version.
08.03.2022
SIEMENS CERT
SSA-256353 V1.0: Third-Party Component Vulnerabilities in RUGGEDCOM ROS
Titel
SSA-256353 V1.0: Third-Party Component Vulnerabilities in RUGGEDCOM ROS
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-256353.pdf
Text
Multiple vulnerabilities affect various third-party components of the RUGGEDCOM ROS, and a cross-site scripting exploit. If exploited, an attacker could cause a denial-of-service, act as a man-in-the-middle or retrieval of sensitive information or gain privileged functions. Siemens is preparing updates and recommends countermeasures for products where updates are not, or ...
08.03.2022
SIEMENS CERT
SSA-309571 V1.2 (Last Update: 2022-03-08): IPU 2021.1 Vulnerabilities in Siemens Industrial Products using Intel CPUs (June 2021)
Titel
SSA-309571 V1.2 (Last Update: 2022-03-08): IPU 2021.1 Vulnerabilities in Siemens Industrial Products using Intel CPUs (June 2021)
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-309571.pdf
Text
Intel has published information on vulnerabilities in Intel products in June 2021. This advisory lists the related Siemens Industrial products affected by these vulnerabilities that can be patched by applying the corresponding BIOS update. In this advisory we summarize: “2021.1 IPU – Intel® CSME, SPS and LMS Advisory” Intel-SA-00459, “2021.1 ...
08.03.2022
SIEMENS CERT
SSA-155599 V1.0: File Parsing Vulnerabilities in COMOS
Titel
SSA-155599 V1.0: File Parsing Vulnerabilities in COMOS
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-155599.pdf
Text
COMOS uses Drawings SDK from Open Design Alliance that is affected by multiple vulnerabilities that could be triggered when the application reads files in DGN, DXF or DWG file formats. If a user is tricked to open a malicious file with the affected application, an attacker could leverage the vulnerability ...
08.03.2022
SIEMENS CERT
SSA-166747 V1.0: Scene File Parsing Vulnerability in Simcenter STAR-CCM+ Viewer before V2022.1
Titel
SSA-166747 V1.0: Scene File Parsing Vulnerability in Simcenter STAR-CCM+ Viewer before V2022.1
Veröffentlicht
8. März 2022 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-166747.pdf
Text
Siemens Simcenter STAR-CCM+ Viewer is affected by a memory corruption vulnerability that could be triggered when the application reads scene (.sce) files. If a user is tricked to open a malicious file with the affected application, this could lead to a crash, and potentially also to arbitrary code execution or ...

Letzte Updates

BOSCH PSIRT
21.08.2024
SIEMENS CERT
12.09.2024
US CERT
19.09.2024
US CERT (ICS)
19.09.2024

Nach Quelle

Archiv

2024
2023
2022
2021
2020
2019
2018
2017

Feeds