May 2019
22.05.2019
SIEMENS CERT
SSB-501863 (Last Update: 2019-05-22): Customer Information on Microsoft Windows RDP Vulnerability for Siemens Healthineers
Title
SSB-501863 (Last Update: 2019-05-22): Customer Information on Microsoft Windows RDP Vulnerability for Siemens Healthineers
Published
May 22, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssb-501863.pdf
Summary
16.05.2019
SIEMENS CERT
SSB-501863 (Last Update: 2019-05-16): Customer Information on Microsoft Windows RDP Vulnerability for Siemens Healthineers
Title
SSB-501863 (Last Update: 2019-05-16): Customer Information on Microsoft Windows RDP Vulnerability for Siemens Healthineers
Published
May 16, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssb-501863.pdf
Summary
14.05.2019
SIEMENS CERT
SSA-102144 (Last Update: 2019-05-14): Code Execution Vulnerability in LOGO! Soft Comfort
Title
SSA-102144 (Last Update: 2019-05-14): Code Execution Vulnerability in LOGO! Soft Comfort
Published
May 14, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-102144.pdf
Summary
A vulnerability was identified in LOGO! Soft Comfort. The vulnerability could allow an attacker to execute arbitrary code if the attacker tricks a legitimate user to open a manipulated project.
14.05.2019
SIEMENS CERT
SSA-705517 (Last Update: 2019-05-14): Remote Code Execution Vulnerability in SIMATIC WinCC and SIMATIC PCS 7
Title
SSA-705517 (Last Update: 2019-05-14): Remote Code Execution Vulnerability in SIMATIC WinCC and SIMATIC PCS 7
Published
May 14, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-705517.pdf
Summary
A vulnerability was identified in SIMATIC WinCC and SIMATIC PCS 7, which could allow an unauthenticated attacker with access to the affected devices to execute arbitrary code. The vulnerability can be exploited if the affected systems do not have "Encrypted Communication" enabled. Siemens provides versions of SIMATIC WinCC and SIMATIC ...
14.05.2019
SIEMENS CERT
SSA-113131 (Last Update: 2019-05-14): Denial-of-Service Vulnerabilities in S7-400 CPUs
Title
SSA-113131 (Last Update: 2019-05-14): Denial-of-Service Vulnerabilities in S7-400 CPUs
Published
May 14, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-113131.pdf
Summary
Two vulnerabilities have been identified in the SIMATIC S7-400 CPU family that could allow an attacker to cause a Denial-of-Service condition. In order to exploit the vulnerability, an attacker must have access to the affected devices on port 102/tcp via Ethernet, PROFIBUS or Multi Point Interfaces (MPI). Siemens provides updates ...
14.05.2019
SIEMENS CERT
SSA-542701 (Last Update: 2019-05-14): Vulnerabilities in SIEMENS LOGO!
Title
SSA-542701 (Last Update: 2019-05-14): Vulnerabilities in SIEMENS LOGO!
Published
May 14, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-542701.pdf
Summary
Multiple vulnerabilities have been identified in SIEMENS LOGO!8 BM devices. The most severe vulnerability could lead to an attacker reading and modifying the device configuration if the attacker has access to port 10005/tcp.
14.05.2019
SIEMENS CERT
SSA-480230 (Last Update: 2019-05-14): Denial-of-Service in Webserver of Industrial Products
Title
SSA-480230 (Last Update: 2019-05-14): Denial-of-Service in Webserver of Industrial Products
Published
May 14, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-480230.pdf
Summary
A vulnerability in the affected devices could allow an unauthorized attacker with network access to the webserver of an affected device to perform a denial-of-service attack. Siemens has released updates for several affected products, and recommends that customers update to the new version. Siemens is preparing further updates and recommends ...
14.05.2019
SIEMENS CERT
SSA-606525 (Last Update: 2019-05-14): Denial-of-Service Vulnerability in SINAMICS PERFECT HARMONY GH180 Ethernet Modbus Interfa...
Title
SSA-606525 (Last Update: 2019-05-14): Denial-of-Service Vulnerability in SINAMICS PERFECT HARMONY GH180 Ethernet Modbus Interface (G28)
Published
May 14, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-606525.pdf
Summary
SINAMICS PERFECT HARMONY GH180 Drives NXG I and NXG II control contains a denial-of-service vulnerability within the Ethernet Modbus interface (G28). An attacker with access to the Ethernet Modbus Interface could cause a Denial-of-Service condition exceeding the number of available connections.
14.05.2019
SIEMENS CERT
SSA-549547 (Last Update: 2019-05-14): Multiple Vulnerabilites in SCALANCE W1750D
Title
SSA-549547 (Last Update: 2019-05-14): Multiple Vulnerabilites in SCALANCE W1750D
Published
May 14, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-549547.pdf
Summary
The latest update for SCALANCE W1750D fixes multiple vulnerabilities. The most severe could allow an unauthenticated attacker with access to the web interface of an affected device to execute arbitrary system commands within the underlying operating system. Siemens has released updates for the affected devices.
14.05.2019
SIEMENS CERT
SSA-307392 (Last Update: 2019-05-14): Denial-of-Service in OPC UA in Industrial Products
Title
SSA-307392 (Last Update: 2019-05-14): Denial-of-Service in OPC UA in Industrial Products
Published
May 14, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-307392.pdf
Summary
A vulnerability has been identified in the OPC UA server of several industrial products. The vulnerability could cause a Denial-of-Service condition on the service or the device. Siemens has released updates for several affected products, and recommends that customers update to the new version. Siemens is preparing further updates and ...
14.05.2019
SIEMENS CERT
SSA-804486 (Last Update: 2019-05-14): Multiple Vulnerabilities in SIMATIC Panels and SIMATIC WinCC (TIA Portal)
Title
SSA-804486 (Last Update: 2019-05-14): Multiple Vulnerabilities in SIMATIC Panels and SIMATIC WinCC (TIA Portal)
Published
May 14, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-804486.pdf
Summary
The latest update for SIMATIC Panel Software and SIMATIC WinCC (TIA Portal) fixes two vulnerabilities. The most severe is a vulnerability which could allow an attacker with network access to the integrated device to read and write variables via SNMP. Siemens recommends to update to the newest version.
14.05.2019
SIEMENS CERT
SSA-902727 (Last Update: 2019-05-14): Multiple Vulnerabilities in Licensing Software for SISHIP Automation Solutions
Title
SSA-902727 (Last Update: 2019-05-14): Multiple Vulnerabilities in Licensing Software for SISHIP Automation Solutions
Published
May 14, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-902727.pdf
Summary
Multiple vulnerabilities have been identified in the WibuKey Digital Rights Management (DRM) solution, which affect SISHIP Automation Solutions. Siemens recommends users to apply the updates to WibuKey Digital Rights Management (DRM) provided by WIBU SYSTEMS AG.
14.05.2019
SIEMENS CERT
SSA-592007 (Last Update: 2019-05-14): Denial-of-Service Vulnerability in Industrial Products
Title
SSA-592007 (Last Update: 2019-05-14): Denial-of-Service Vulnerability in Industrial Products
Published
May 14, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-592007.pdf
Summary
Several industrial controllers are affected by a security vulnerability that could allow an attacker to cause a Denial-of-Service condition via PROFINET DCP network packets under certain circumstances. Precondition for this scenario is a direct OSI Layer 2 access to the affected products. PROFIBUS interfaces are not affected. Siemens has released ...
14.05.2019
SIEMENS CERT
SSA-697412 (Last Update: 2019-05-14): Multiple Vulnerabilities in SIMATIC WinCC, SIMATIC WinCC Runtime, SIMATIC PCS 7, SIMATIC ...
Title
SSA-697412 (Last Update: 2019-05-14): Multiple Vulnerabilities in SIMATIC WinCC, SIMATIC WinCC Runtime, SIMATIC PCS 7, SIMATIC TIA Portal
Published
May 14, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-697412.pdf
Summary
The latest update for SIMATIC WinCC fixes multiple vulnerabilities. The most severe could allow an attacker to execute arbitrary commands on an affected system under certain conditions. Siemens has released updates for several affected products, and recommends that customers update to the new version. Siemens is preparing further updates and ...
14.05.2019
SIEMENS CERT
SSA-865156 (Last Update: 2019-05-14): Denial-of-Service Vulnerability in SINAMICS PERFECT HARMONY GH180 Fieldbus Network
Title
SSA-865156 (Last Update: 2019-05-14): Denial-of-Service Vulnerability in SINAMICS PERFECT HARMONY GH180 Fieldbus Network
Published
May 14, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-865156.pdf
Summary
SINAMICS PERFECT HARMONY GH180 Drives NXG I and NXG II control contains a denial-of-service vulnerability within the Parameter Read/Write over Fieldbus network functionality. An attacker with access to the field bus network could cause a Denial-of-Service condition by sending specially crafted packets. By default, Parameter Read/Write over Fieldbus network is ...
April 2019
09.04.2019
SIEMENS CERT
SSA-324467 (Last Update: 2019-04-09): OS Command Injection in Spectrum Power 4.7
Title
SSA-324467 (Last Update: 2019-04-09): OS Command Injection in Spectrum Power 4.7
Published
April 9, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-324467.pdf
Summary
Versions of Spectrum Power™ 4, that use the customer specific project enhancement (PE) Web Office Portal (WOP) are affected by a possible OS Command Injection vulnerability. Siemens has released patches for the affected version and recommends to apply specific countermeasures until these patches can be applied.
09.04.2019
SIEMENS CERT
SSA-307392 (Last Update: 2019-04-09): Denial-of-Service in OPC UA in Industrial Products
Title
SSA-307392 (Last Update: 2019-04-09): Denial-of-Service in OPC UA in Industrial Products
Published
April 9, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-307392.pdf
Summary
A vulnerability has been identified in the OPC UA server of several industrial products. The vulnerability could cause a Denial-of-Service condition on the service or the device. Siemens has released updates for several affected products, and recommends that customers update to the new version. Siemens is preparing further updates and ...
09.04.2019
SIEMENS CERT
SSA-141614 (Last Update: 2019-04-09): Denial-of-Service in SIMOCODE pro V EIP
Title
SSA-141614 (Last Update: 2019-04-09): Denial-of-Service in SIMOCODE pro V EIP
Published
April 9, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-141614.pdf
Summary
SIMOCODE pro V EIP is affected by a vulnerability that could allow remote attackers to conduct a Denial-of-Service (DoS) attack by sending specially crafted packets to port 161/udp (SNMP). Siemens has released an update for SIMOCODE pro V EIP and recommends that customers update to the new version.
09.04.2019
SIEMENS CERT
SSA-480230 (Last Update: 2019-04-09): Denial-of-Service in Webserver of Industrial Products
Title
SSA-480230 (Last Update: 2019-04-09): Denial-of-Service in Webserver of Industrial Products
Published
April 9, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-480230.pdf
Summary
A vulnerability in the affected devices could allow an unauthorized attacker with network access to the webserver of an affected device to perform a denial-of-service attack. Siemens has released updates for several affected products, and recommends that customers update to the new version. Siemens is preparing further updates and recommends ...
09.04.2019
SIEMENS CERT
SSA-844562 (Last Update: 2019-04-09): Multiple Vulnerabilities in Licensing Software for WinCC OA
Title
SSA-844562 (Last Update: 2019-04-09): Multiple Vulnerabilities in Licensing Software for WinCC OA
Published
April 9, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-844562.pdf
Summary
Multiple vulnerabilities have been identified in the WibuKey Digital Rights Management (DRM) solution, which affect WinCC OA. Siemens recommends users to apply the updates to WibuKey Digital Rights Management (DRM) provided by WIBU SYSTEMS AG.
09.04.2019
SIEMENS CERT
SSA-436177 (Last Update: 2019-04-09): Multiple Vulnerabilities in SINEMA Remote Connect
Title
SSA-436177 (Last Update: 2019-04-09): Multiple Vulnerabilities in SINEMA Remote Connect
Published
April 9, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-436177.pdf
Summary
The latest updates for SINEMA Remote Connect Client and Server fix multiple vulnerabilities. One of these vulnerabilities could allow an attacker to circumvent the authorization of the system for certain functionalities and to execute privileged functions. Siemens has released firmware updates for SINEMA Remote Connect Client and Server.
09.04.2019
SIEMENS CERT
SSA-451142 (Last Update: 2019-04-09): Multiple Vulnerabilities in RUGGEDCOM ROX II
Title
SSA-451142 (Last Update: 2019-04-09): Multiple Vulnerabilities in RUGGEDCOM ROX II
Published
April 9, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-451142.pdf
Summary
The latest update for RUGGEDCOM ROX II fixes multiple vulnerabilities in third party component software. The most severe vulnerability could allow an attacker to run arbitrary code on the device. Siemens has released firmware updates for RUGGEDCOM ROX II and recommends that customers update to the new version.
09.04.2019
SIEMENS CERT
SSA-901333 (Last Update: 2019-04-09): KRACK Attacks Vulnerabilities in Industrial Products
Title
SSA-901333 (Last Update: 2019-04-09): KRACK Attacks Vulnerabilities in Industrial Products
Published
April 9, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-901333.pdf
Summary
Multiple vulnerabilities affecting WPA/WPA2 implementations were identified by a researcher and publicly disclosed under the term "Key Reinstallation Attacks" (KRACK). These vulnerabilities could potentially allow an attacker within the radio range of the wireless network to decrypt, replay or inject forged network packets into the wireless communication. Several Siemens Industrial ...
09.04.2019
SIEMENS CERT
SSA-179516 (Last Update: 2019-04-09): OpenSSL Vulnerability in Industrial Products
Title
SSA-179516 (Last Update: 2019-04-09): OpenSSL Vulnerability in Industrial Products
Published
April 9, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-179516.pdf
Summary
A vulnerability in OpenSSL affects several Siemens industrial products. Siemens has released updates for some affected products and is working on updates for others.
09.04.2019
SIEMENS CERT
SSB-439005 (Last Update: 2019-04-09): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-...
Title
SSB-439005 (Last Update: 2019-04-09): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP
Published
April 9, 2019, 2 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssb-439005.pdf
Summary

Last Updates

BOSCH PSIRT
14.08.2025
SIEMENS CERT
26.08.2025
US CERT
25.08.2025
US CERT (ICS)
04.09.2025

By Source

Archive

2025
2024
2023
2022
2021
2020
2019
2018
2017

Feeds