Februar 2020
10.02.2020
SIEMENS CERT
SSA-724606 (Last Update: 2020-02-10): Denial-of-Service Vulnerabilities in SIMATIC S7-1200 CPU Family
Titel
SSA-724606 (Last Update: 2020-02-10): Denial-of-Service Vulnerabilities in SIMATIC S7-1200 CPU Family
Veröffentlicht
10. Februar 2020 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-724606.pdf
Text
Siemens SIMATIC S7-1200 PLCs, version 2 and higher, allow device management over TCP port 102 (ISO-TSAP) and retrieving status information over UDP port 161 (SNMP). It is possible to cause the device to go into defect mode by sending specially crafted packets to these ports. Siemens addresses these issues with ...
10.02.2020
SIEMENS CERT
SSA-804486 (Last Update: 2020-02-10): Multiple Vulnerabilities in SIMATIC Panels and SIMATIC WinCC (TIA Portal)
Titel
SSA-804486 (Last Update: 2020-02-10): Multiple Vulnerabilities in SIMATIC Panels and SIMATIC WinCC (TIA Portal)
Veröffentlicht
10. Februar 2020 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-804486.pdf
Text
The latest update for SIMATIC Panel Software and SIMATIC WinCC (TIA Portal) fixes two vulnerabilities. The most severe is a vulnerability which could allow an attacker with network access to the integrated device to read and write variables via SNMP. Siemens recommends to update to the newest version.
10.02.2020
SIEMENS CERT
SSA-240718 (Last Update: 2020-02-10): Insecure storage of HTTPS CA certificate in SIMATIC S7-1200 V2.x
Titel
SSA-240718 (Last Update: 2020-02-10): Insecure storage of HTTPS CA certificate in SIMATIC S7-1200 V2.x
Veröffentlicht
10. Februar 2020 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-240718.pdf
Text
For the convenience of the customer, a Certificate Authority (CA) for HTTPS connections is installed on the Siemens SIMATIC S7-1200 PLC. The user has the option to trust this CA which if selected installs the certificate into the browser’s certificate store. Once the user completes this step, the browser will ...
10.02.2020
SIEMENS CERT
SSA-180635 (Last Update: 2020-02-10): Denial-of-Service Vulnerabilities in SIMATIC S7-1500 CPU Family
Titel
SSA-180635 (Last Update: 2020-02-10): Denial-of-Service Vulnerabilities in SIMATIC S7-1500 CPU Family
Veröffentlicht
10. Februar 2020 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-180635.pdf
Text
Older versions of the S7-1500 CPU are affected by two Denial-of-Service vulnerabilities. Siemens has released updates for the currently supported hardware versions.
10.02.2020
SIEMENS CERT
SSA-987029 (Last Update: 2020-02-10): Denial-of-Service Vulnerability in SIMATIC S7-300 CPU Family
Titel
SSA-987029 (Last Update: 2020-02-10): Denial-of-Service Vulnerability in SIMATIC S7-300 CPU Family
Veröffentlicht
10. Februar 2020 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-987029.pdf
Text
A vulnerability could allow attackers to perform a Denial-of-Service attack over the network without prior authentication against S7-300 CPUs under certain conditions. Siemens recommends specific mitigations. Siemens will update this advisory when new information becomes available.
10.02.2020
SIEMENS CERT
SSA-087240 (Last Update: 2020-02-10): Vulnerabilities in SIEMENS LOGO!
Titel
SSA-087240 (Last Update: 2020-02-10): Vulnerabilities in SIEMENS LOGO!
Veröffentlicht
10. Februar 2020 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-087240.pdf
Text
Two vulnerabilities have been identified in SIEMENS LOGO!8 BM devices. The most severe vulnerability could allow an attacker to hijack existing web sessions. Siemens provides LOGO!8 BM FS-05 with firmware version V1.81.2, which fixes the first vulnerability, and recommends specific mitigations for the second vulnerability.
10.02.2020
SIEMENS CERT
SSA-818183 (Last Update: 2020-02-10): Denial-of-Service Vulnerability in SIMATIC S7-300 CPU Family
Titel
SSA-818183 (Last Update: 2020-02-10): Denial-of-Service Vulnerability in SIMATIC S7-300 CPU Family
Veröffentlicht
10. Februar 2020 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-818183.pdf
Text
Siemens has released a firmware update for the SIMATIC S7-300 CPU family which fixes a vulnerability that could allow remote attackers to perform a Denial-of-Service attack under certain conditions.
10.02.2020
SIEMENS CERT
SSA-954136 (Last Update: 2020-02-10): User Impersonation Vulnerability in SCALANCE X-200IRT Switch Family
Titel
SSA-954136 (Last Update: 2020-02-10): User Impersonation Vulnerability in SCALANCE X-200IRT Switch Family
Veröffentlicht
10. Februar 2020 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-954136.pdf
Text
The latest firmware update for the SCALANCE X-200IRT switch family fixes a vulnerability which could allow attackers to impersonate legitimate users of the web interface.
10.02.2020
SIEMENS CERT
SSA-447396 (Last Update: 2020-02-10): Denial-of-Service in SCALANCE X-300, SCALANCE X408 and SCALANCE X414
Titel
SSA-447396 (Last Update: 2020-02-10): Denial-of-Service in SCALANCE X-300, SCALANCE X408 and SCALANCE X414
Veröffentlicht
10. Februar 2020 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-447396.pdf
Text
A vulnerability has been identified in the integrated web server of SCALANCE X300, SCALANCE X408, and SCALANCE X414. The vulnerability could allow an attacker with network access to the device to cause a Denial-of-Service condition. The vulnerability can be triggered with publicly available tools, including vulnerability scanners. Siemens provides updates ...
10.02.2020
SIEMENS CERT
SSA-774850 (Last Update: 2020-02-10): Vulnerabilities in SIEMENS LOGO!8 devices
Titel
SSA-774850 (Last Update: 2020-02-10): Vulnerabilities in SIEMENS LOGO!8 devices
Veröffentlicht
10. Februar 2020 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-774850.pdf
Text
Two vulnerabilities have been identified in SIEMENS LOGO!8 devices. The Session ID on the integrated webserver of LOGO!8 devices is not invalidated upon logout. The second vulnerability could allow an attacker with network access to port 10005/tcp to cause a Denial-of-Service condition by sending specifically crafted packages to the service. ...
10.02.2020
SIEMENS CERT
SSA-234763 (Last Update: 2020-02-10): OpenSSL Vulnerabilities in Siemens Industrial Products
Titel
SSA-234763 (Last Update: 2020-02-10): OpenSSL Vulnerabilities in Siemens Industrial Products
Veröffentlicht
10. Februar 2020 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-234763.pdf
Text
Vulnerabilities in OpenSSL (see https://www.openssl.org/news/secadv_20140605.txt) affect several Siemens industrial products. Siemens has released updates for all affected products.
10.02.2020
SIEMENS CERT
SSA-874235 (Last Update: 2020-02-10): Intel Vulnerability in Siemens Industrial Products
Titel
SSA-874235 (Last Update: 2020-02-10): Intel Vulnerability in Siemens Industrial Products
Veröffentlicht
10. Februar 2020 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-874235.pdf
Text
Several Intel chipsets for Intel Core i5, Intel Core i7 and Intel XEON are susceptible to remote code execution vulnerability (CVE-2017-5689) [1]. As several Siemens Industrial Products use Intel technology, they are also affected. Siemens has released updates for the affected Industrial PCs. [1] Intel Security Advisory – INTEL-SA-00075:https://security-center.intel.com/advisory.aspx?intelid=INTEL-SA-00075&languageid=en-fr
10.02.2020
SIEMENS CERT
SSA-507847 (Last Update: 2020-02-10): Cross-Site Request Forgery Vulnerability in SIMATIC S7-1200 CPU Family Version 4
Titel
SSA-507847 (Last Update: 2020-02-10): Cross-Site Request Forgery Vulnerability in SIMATIC S7-1200 CPU Family Version 4
Veröffentlicht
10. Februar 2020 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-507847.pdf
Text
The latest firmware update for S7-1200 CPU family version 4 fixes a Cross-Site Request Forgery vulnerability. Siemens recommends to update affected devices as soon as possible.
10.02.2020
SIEMENS CERT
SSA-584286 (Last Update: 2020-02-10): Denial-of-Service Vulnerability in SIMATIC S7-1200 CPU and SIMATIC S7-1500 CPU
Titel
SSA-584286 (Last Update: 2020-02-10): Denial-of-Service Vulnerability in SIMATIC S7-1200 CPU and SIMATIC S7-1500 CPU
Veröffentlicht
10. Februar 2020 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-584286.pdf
Text
A vulnerability was identified in SIMATIC S7-1200 and S7-1500 CPUs that could allow an attacker to cause a denial-of-service condition preventing HMI or engineering access to the PLC over port 102/tcp. Siemens has released an update for the S7-1500 product and recommends that customers update to the new version. Siemens ...
10.02.2020
SIEMENS CERT
SSA-542701 (Last Update: 2020-02-10): Vulnerabilities in SIEMENS LOGO!
Titel
SSA-542701 (Last Update: 2020-02-10): Vulnerabilities in SIEMENS LOGO!
Veröffentlicht
10. Februar 2020 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-542701.pdf
Text
Multiple vulnerabilities have been identified in SIEMENS LOGO!8 BM devices. The most severe vulnerability could lead to an attacker reading and modifying the device configuration if the attacker has access to port 10005/tcp.
10.02.2020
SIEMENS CERT
SSA-731239 (Last Update: 2020-02-10): Vulnerabilities in SIMATIC S7-300 and S7-400 CPUs
Titel
SSA-731239 (Last Update: 2020-02-10): Vulnerabilities in SIMATIC S7-300 and S7-400 CPUs
Veröffentlicht
10. Februar 2020 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-731239.pdf
Text
Two vulnerabilities have been identified in SIMATIC S7-300 and S7-400 CPU families. One vulnerability could lead to a Denial-of-Service, the other vulnerability could result in credential disclosure. Siemens recommends specific mitigations. Siemens will update this advisory when new information becomes available.
10.02.2020
SIEMENS CERT
SSA-293562 (Last Update: 2020-02-10): Vulnerabilities in Industrial Products
Titel
SSA-293562 (Last Update: 2020-02-10): Vulnerabilities in Industrial Products
Veröffentlicht
10. Februar 2020 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-293562.pdf
Text
Several industrial devices are affected by two vulnerabilities that could allow an attacker to cause a Denial-of-Service condition via PROFINET DCP network packets under certain circumstances. The precondition for this scenario is a direct layer 2 access to the affected products. PROFIBUS interfaces are not affected. Siemens has released updates ...
10.02.2020
SIEMENS CERT
SSA-625789 (Last Update: 2020-02-10): Security Vulnerabilities in Siemens SIMATIC S7-1200 CPU
Titel
SSA-625789 (Last Update: 2020-02-10): Security Vulnerabilities in Siemens SIMATIC S7-1200 CPU
Veröffentlicht
10. Februar 2020 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-625789.pdf
Text
Security experts have examined the SIMATIC S7-1200 Programmable Logic Controller (PLC). This research has revealed some weaknesses in the SIMATIC S71200 CPU communication and authentication functions. Once the automation network is compromised it is possible to demonstrate the following weaknesses using a remote exploit: - Trigger CPU functions by record ...
10.02.2020
SIEMENS CERT
SSA-113131 (Last Update: 2020-02-10): Denial-of-Service Vulnerabilities in SIMATIC S7-400 CPUs
Titel
SSA-113131 (Last Update: 2020-02-10): Denial-of-Service Vulnerabilities in SIMATIC S7-400 CPUs
Veröffentlicht
10. Februar 2020 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-113131.pdf
Text
Two vulnerabilities have been identified in the SIMATIC S7-400 CPU family that could allow an attacker to cause a Denial-of-Service condition. In order to exploit the vulnerability, an attacker must have access to the affected devices on port 102/tcp via Ethernet, PROFIBUS or Multi Point Interfaces (MPI). Siemens provides updates ...
10.02.2020
SIEMENS CERT
SSA-487246 (Last Update: 2020-02-10): Vulnerabilities in SIMATIC HMI Devices
Titel
SSA-487246 (Last Update: 2020-02-10): Vulnerabilities in SIMATIC HMI Devices
Veröffentlicht
10. Februar 2020 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-487246.pdf
Text
The latest updates for the affected products fix three vulnerabilities. The most severe of these vulnerabilities could allow an attacker to perform a Denial-of-Service attack against HMI panels under certain conditions.
10.02.2020
SIEMENS CERT
SSA-179516 (Last Update: 2020-02-10): OpenSSL Vulnerability in Industrial Products
Titel
SSA-179516 (Last Update: 2020-02-10): OpenSSL Vulnerability in Industrial Products
Veröffentlicht
10. Februar 2020 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-179516.pdf
Text
A vulnerability in OpenSSL affects several Siemens industrial products. Siemens has released updates for some affected products and is working on updates for others.
10.02.2020
SIEMENS CERT
SSA-347726 (Last Update: 2020-02-10): Denial-of-Service Vulnerability in SIMATIC S7-1500, SIMATIC S7-1500 Software Controller a...
Titel
SSA-347726 (Last Update: 2020-02-10): Denial-of-Service Vulnerability in SIMATIC S7-1500, SIMATIC S7-1500 Software Controller and SIMATIC ET 200SP Open Controller
Veröffentlicht
10. Februar 2020 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-347726.pdf
Text
Versions of SIMATIC S7-1500, SIMATIC S7-1500 Software Controller and SIMATIC ET200SP Open Controller are affected by a denial-of-service vulnerability. An attacker with network access to the PLC can cause a Denial-of-Service condition on the network stack.
10.02.2020
SIEMENS CERT
SSA-233109 (Last Update: 2020-02-10): Web Vulnerabilities in SIMATIC Panels
Titel
SSA-233109 (Last Update: 2020-02-10): Web Vulnerabilities in SIMATIC Panels
Veröffentlicht
10. Februar 2020 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-233109.pdf
Text
The latest update for SIMATIC Panel software and SIMATIC WinCC (TIA Portal) fixes two web vulnerabilities. The most severe is a vulnerability which could allow an attacker with network access to the integrated webserver to download arbitrary files. Siemens recommends to update to the newest version.
10.02.2020
SIEMENS CERT
SSA-672373 (Last Update: 2020-02-10): Vulnerabilities in CP 1543-1
Titel
SSA-672373 (Last Update: 2020-02-10): Vulnerabilities in CP 1543-1
Veröffentlicht
10. Februar 2020 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-672373.pdf
Text
The latest firmware update for SIMATIC CP 1543-1 devices fixes two vulnerabilities. One of these vulnerabilities could allow authorized users to escalate their privileges on the CP.
10.02.2020
SIEMENS CERT
SSA-470231 (Last Update: 2020-02-10): TPM Vulnerability in SIMATIC IPCs
Titel
SSA-470231 (Last Update: 2020-02-10): TPM Vulnerability in SIMATIC IPCs
Veröffentlicht
10. Februar 2020 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-470231.pdf
Text
Several SIMATIC IPCs include a version of Infineon's Trusted Platform Module (TPM) firmware that mishandles RSA key generation. This makes it easier for attackers to conduct cryptographic attacks against the key material. Siemens has released updates for the affected Industrial PCs.

Letzte Updates

BOSCH PSIRT
25.04.2025
SIEMENS CERT
17.04.2025
US CERT
01.04.2025
US CERT (ICS)
08.05.2025

Nach Quelle

Archiv

2025
2024
2023
2022
2021
2020
2019
2018
2017

Feeds