Februar 2020
Titel
SSA-176087 (Last Update: 2020-02-10): Unauthenticated Access to Critical Services in SCALANCE X-200 Switch Family
Veröffentlicht
10. Februar 2020 01:00
Text
A potential vulnerability was discovered in the web server authentication of SCALANCE X-200 and X-200IRT switches that might allow attackers to perform administrative operations over the network without authentication. This issue only applies to switches using older firmware versions and has been fixed from firmware V4.5.0 (non-IRT) and V5.1.0 (IRT) ...
Titel
SSA-944083 (Last Update: 2020-02-10): HTTP Header Injection in SIMATIC Panels and SIMATIC WinCC (TIA Portal)
Veröffentlicht
10. Februar 2020 01:00
Text
The latest update for SIMATIC Panel software and SIMATIC WinCC (TIA Portal) fixes a vulnerability that could allow an attacker with network access to the web server to perform a HTTP header injection attack.
Titel
SSA-321046 (Last Update: 2020-02-10): Denial-of-Service Vulnerability in SCALANCE X-300/X408 Switch Family
Veröffentlicht
10. Februar 2020 01:00
Text
The latest firmware update for the Siemens SCALANCE X-300 switch family and SCALANCE X 408 fixes two vulnerabilities. The vulnerabilities could allow attackers to cause a device reboot under certain conditions. An attacker must have network access to the device to exploit this vulnerability.
Titel
SSA-914382 (Last Update: 2020-02-10): Denial-of-Service Vulnerability in SIMATIC S7-400 CPU Family
Veröffentlicht
10. Februar 2020 01:00
Text
SIMATIC S7-400 CPUs are affected by a security vulnerability which could lead to a Denial-of-Service condition of the PLC if specially crafted packets are received and processed. The affected SIMATIC S7-400 CPU hardware versions are in the product cancellation phase or already phased-out. Siemens recommends customers either upgrading to a ...
Titel
SSA-110922 (Last Update: 2020-02-10): Web Vulnerability in TIM 1531 IRC
Veröffentlicht
10. Februar 2020 01:00
Text
The latest update for TIM 1531 IRC fixes a security vulnerability that could allow unauthorized remote attackers to perform administrative operations on the device. Siemens recommends updating as soon as possible.
Titel
SSA-346262 (Last Update: 2020-02-10): Denial-of-Service in Industrial Products
Veröffentlicht
10. Februar 2020 01:00
Text
Several industrial products are affected by a vulnerability that could allow remote attackers to conduct a Denial-of-Service (DoS) attack by sending specially crafted packets to port 161/udp (SNMP). Siemens has released updates for several affected products, and recommends that customers update to the new version. Siemens is preparing further updates ...
Titel
SSA-487246 (Last Update: 2020-02-10): Vulnerabilities in SIMATIC HMI Devices
Veröffentlicht
10. Februar 2020 01:00
Text
The latest updates for the affected products fix three vulnerabilities. The most severe of these vulnerabilities could allow an attacker to perform a Denial-of-Service attack against HMI panels under certain conditions.
Titel
SSA-179516 (Last Update: 2020-02-10): OpenSSL Vulnerability in Industrial Products
Veröffentlicht
10. Februar 2020 01:00
Text
A vulnerability in OpenSSL affects several Siemens industrial products. Siemens has released updates for some affected products and is working on updates for others.
Titel
SSA-623229 (Last Update: 2020-02-10): DROWN Vulnerability in Industrial Products
Veröffentlicht
10. Februar 2020 01:00
Text
The disclosed attack called DROWN (Decrypting RSA with Obsolete and Weakened eNcryption), also known as CVE-2016-0800, could potentially allow the decryption of SSL/TLS sessions of some Siemens industrial products under certain conditions. Siemens has released firmware updates and solutions to resolve the vulnerability
Titel
SSA-470231 (Last Update: 2020-02-10): TPM Vulnerability in SIMATIC IPCs
Veröffentlicht
10. Februar 2020 01:00
Text
Several SIMATIC IPCs include a version of Infineon's Trusted Platform Module (TPM) firmware that mishandles RSA key generation. This makes it easier for attackers to conduct cryptographic attacks against the key material. Siemens has released updates for the affected Industrial PCs.
Titel
AutomationDirect C-More Touch Panels
Veröffentlicht
4. Februar 2020 16:00
Text
This advisory contains mitigations for an insufficiently protected credentials vulnerability in AutomationDirect's C-More Touch Panels software management platform.
Januar 2020
Titel
Medtronic Conexus Radio Frequency Telemetry Protocol (Update A)
Veröffentlicht
30. Januar 2020 16:05
Text
This updated advisory is a follow-up to the original advisory titled ICSMA-19-080-01 Medtronic Conexus Radio Frequency Telemetry Protocol that was published March 21, 2019, on the ICS webpage on us-cert.gov. This medical advisory includes mitigations for improper access control and cleartext transmission of sensitive information vulnerabilities reported in Medtronic's proprietary ...
Titel
Medtronic 2090 Carelink Programmer Vulnerabilities (Update C)
Veröffentlicht
30. Januar 2020 16:00
Text
This updated advisory is a follow-up to the updated advisory titled ICSMA-18-058-01 Medtronic 2090 Carelink Programmer Vulnerabilities (Update B) that was published October 11, 2018, ICS webpage on us-cert.gov. This medical device advisory contains mitigation details for vulnerabilities in Medtronic’s 2090 CareLink Programmer and its accompanying software deployment network.
Titel
Deserialization of Untrusted Data in Bosch BVMS Mobile Video Service
Veröffentlicht
29. Januar 2020 01:00
Text

BOSCH-SA-885551-BT: A recently discovered security vulnerability affects the BVMS Mobile Video Service (BVMS MVS). The vulnerability is exploitable via the network interface. Bosch rates this vulnerability with a CVSS v3.1 Base Score of 10.0 (Critical) and recommends customers to update the vulnerable components with fixed software versions. The vulnerability was ...

Titel
Missing Authentication for Critical Function in Bosch Video Streaming Gateway
Veröffentlicht
29. Januar 2020 01:00
Text

BOSCH-SA-260625-BT: A recently discovered security vulnerability affects the Bosch Video Streaming Gateway (VSG). The vulnerability is exploitable via the network interface. An unauthorized attacker can retrieve and set arbitrary configuration data of the VSG. Bosch rates this vulnerability with a CVSS v3.1 Base Score of 10.0 (Critical) and strongly recommends ...

Titel
Path Traversal in Bosch Video Management System NoTouch deployment
Veröffentlicht
29. Januar 2020 01:00
Text

BOSCH-SA-815013-BT: A path traversal vulnerability exists in the BVMS NoTouch deployment. If this vulnerability is exploited an unauthenticated attacker without local shell access to a BVMS Central Server system is able to fetch arbitrary data from the file system of the Central Server computer. Under specific circumstances an attack can ...

Titel
Path Traversal in Bosch Video Management System
Veröffentlicht
29. Januar 2020 01:00
Text

BOSCH-SA-381489-BT: A path traversal vulnerability exists in the BVMS. An authenticated BVMS user can successfully request and fetch arbitrary files from the Central Server machine using the FileTransferService. Bosch rates this vulnerability with a CVSS v3.1 Base Score of 7.7 (High) and strongly recommends customers to update vulnerable components with ...

Titel
GE CARESCAPE, ApexPro, and Clinical Information Center systems
Veröffentlicht
23. Januar 2020 17:00
Text
This advisory contains mitigations for multiple vulnerabilities in the GE CARESCAPE ApexPro and Clinical Information Center (CIC) healthcare monitoring platforms.
Titel
Honeywell Maxpro VMS & NVR
Veröffentlicht
21. Januar 2020 16:00
Text
This advisory contains mitigations for deserialization of untrusted data and SQL injection vulnerabilities in Honeywell's MAXPRO VMS & NVR video management systems.
Titel
GE PACSystems RX3i
Veröffentlicht
14. Januar 2020 23:25
Text
This advisory contains mitigations for an improper input validation vulnerability in GE's PACSystems RX3i controllers.
Titel
Siemens SINEMA Server
Veröffentlicht
14. Januar 2020 23:20
Text
This advisory contains mitigations for an incorrect privilege assignment vulnerability in Siemens' SINEMA server network management software.
Titel
Siemens SINAMICS PERFECT HARMONY GH180
Veröffentlicht
14. Januar 2020 23:10
Text
This advisory contains mitigations for a protection mechanism failure vulnerability in Siemens' Sinamics Perfect Harmony GH180 voltage converter.
Titel
Siemens TIA Portal
Veröffentlicht
14. Januar 2020 23:05
Text
This advisory contains mitigations for a path traversal vulnerability in the Siemens TIA Portal engineering framework.
Titel
Siemens EN100 Ethernet Module (Update A)
Veröffentlicht
14. Januar 2020 14:45
Text
This updated advisory is a follow-up to the original advisory titled ICSA-19-344-07 Siemens EN100 Ethernet Module that was published December 10, 2019, to the ICS webpage on us-cert.gov. This advisory contains mitigations for improper restriction of operations within the bounds of a memory buffer, cross-site scripting, and relative path traversal ...
Titel
Siemens Industrial Real-Time (IRT) Devices (Update A)
Veröffentlicht
14. Januar 2020 14:40
Text
This updated advisory is a follow-up to the original advisory titled ICSA-19-283-01 Siemens Industrial Real-Time (IRT) Devices that was published October 10, 2019, on the ICS webpage on us-cert.gov. This advisory includes mitigations for an improper input validation vulnerability reported in the Siemens Industrial Real-Time (IRT) devices.

Letzte Updates

BOSCH PSIRT
25.04.2025
SIEMENS CERT
14.05.2025
US CERT
12.05.2025
US CERT (ICS)
20.05.2025

Nach Quelle

Archiv

2025
2024
2023
2022
2021
2020
2019
2018
2017

Feeds