Bulletins | CERT@VDE

SSA-346262 (Last Update: 2019-01-08): Denial-of-Service in Industrial Products

Titel

SSA-346262 (Last Update: 2019-01-08): Denial-of-Service in Industrial Products

Veröffentlicht

8. Januar 2019 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-346262.pdf

Text

Several industrial products are affected by a vulnerability that could allow remote attackers to conduct a Denial-of-Service (DoS) attack by sending specially crafted packets to port 161/udp (SNMP). Siemens has released updates for several affected products, and recommends that customers update to the new version. Siemens is preparing further updates ...

SSA-181018 (Last Update: 2019-01-08): Heap Overflow Vulnerability in SCALANCE X switches, RUGGEDCOM WiMAX, RFID 181-EIP, and SI...

Titel

SSA-181018 (Last Update: 2019-01-08): Heap Overflow Vulnerability in SCALANCE X switches, RUGGEDCOM WiMAX, RFID 181-EIP, and SIMATIC RF182C

Veröffentlicht

8. Januar 2019 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-181018.pdf

Text

SCALANCE X switches, RUGGEDCOM WiMAX, RFID 181-EIP, and SIMATIC RF182C are affected by a vulnerability that could allow an unprivileged attacker located in the same local network segment (OSI Layer 2) to gain system privileges by sending a specially crafted DHCP response to a client's DHCP request. Siemens has released ...

SSA-535640 (Last Update: 2019-01-08): Vulnerability in Industrial Products

Titel

SSA-535640 (Last Update: 2019-01-08): Vulnerability in Industrial Products

Veröffentlicht

8. Januar 2019 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-535640.pdf

Text

Various industrial products use the Discovery Service of the OPC UA protocol stack by the OPC foundation https://github.com/OPCFoundation/UA-.NETStandard and could therefore be affected by the remote resource consumption attacks (CVE-2017-12069).

SSA-293562 (Last Update: 2019-01-08): Vulnerabilities in Industrial Products

Titel

SSA-293562 (Last Update: 2019-01-08): Vulnerabilities in Industrial Products

Veröffentlicht

8. Januar 2019 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-293562.pdf

Text

Several industrial devices are affected by two vulnerabilities that could allow an attacker to cause a Denial-of-Service condition via PROFINET DCP network packets under certain circumstances. The precondition for this scenario is a direct layer 2 access to the affected products. PROFIBUS interfaces are not affected. Siemens has released updates ...

SSA-325546 (Last Update: 2019-01-08): Denial-of-Service Vulnerabilities in EN100 Ethernet Communication Module of SWT3000

Titel

SSA-325546 (Last Update: 2019-01-08): Denial-of-Service Vulnerabilities in EN100 Ethernet Communication Module of SWT3000

Veröffentlicht

8. Januar 2019 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-325546.pdf

Text

The firmware variant IEC 61850 of the EN100 Ethernet communication module for SWT 3000 is affected by security vulnerabilities which could allow an attacker to conduct a Denial-of-Service attack over the network. Siemens has released updates for several affected products, is working on updates for the remaining affected products, and ...

SSA-306710 (Last Update: 2019-01-08): Denial-of-Service Vulnerability in SIMATIC S7-300 CPU

Titel

SSA-306710 (Last Update: 2019-01-08): Denial-of-Service Vulnerability in SIMATIC S7-300 CPU

Veröffentlicht

8. Januar 2019 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-306710.pdf

Text

Siemens has released a firmware update for the SIMATIC S7-300 CPU family which fixes a vulnerability that could allow remote attackers to perform a Denial-of-Service attack.

SSA-579309 (Last Update: 2019-01-08): Denial-of-Service in SICAM A8000 Series

Titel

SSA-579309 (Last Update: 2019-01-08): Denial-of-Service in SICAM A8000 Series

Veröffentlicht

8. Januar 2019 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-579309.pdf

Text

The SICAM A8000 RTU series is affected by a security vulnerability that could allow unauthenticated remote users to cause a Denial-of-Service (DoS) condition of the web server of affected products. Siemens has released updates for all product variants and recommends that customers update to the new versions.

SSA-348629 (Last Update: 2019-01-08): Denial-of-Service Vulnerability in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Pr...

Titel

SSA-348629 (Last Update: 2019-01-08): Denial-of-Service Vulnerability in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Professional and SIMATIC NET PC Software

Veröffentlicht

8. Januar 2019 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-348629.pdf

Text

A Denial-of-Service vulnerability has been identified in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Professional and SIMATIC NET PC-Software. Siemens has released updates for several affected products and recommends that customers update to the new version. Siemens is preparing further updates and recommends specific countermeasures until patches are available.

SSA-180635 (Last Update: 2019-01-08): Denial-of-Service Vulnerabilities in S7-1500 CPU

Titel

SSA-180635 (Last Update: 2019-01-08): Denial-of-Service Vulnerabilities in S7-1500 CPU

Veröffentlicht

8. Januar 2019 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-180635.pdf

Text

Older versions of the S7-1500 CPU are affected by two Denial-of-Service vulnerabilities. Siemens has released updates for the currently supported hardware versions.

SSA-592007 (Last Update: 2019-01-08): Denial-of-Service Vulnerability in Industrial Products

Titel

SSA-592007 (Last Update: 2019-01-08): Denial-of-Service Vulnerability in Industrial Products

Veröffentlicht

8. Januar 2019 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-592007.pdf

Text

Several industrial controllers are affected by a security vulnerability that could allow an attacker to cause a Denial-of-Service condition via PROFINET DCP network packets under certain circumstances. Precondition for this scenario is a direct OSI Layer 2 access to the affected products. PROFIBUS interfaces are not affected. Siemens has released ...

SSB-439005 (Last Update: 2019-01-08): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-...

Titel

SSB-439005 (Last Update: 2019-01-08): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP

Veröffentlicht

8. Januar 2019 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssb-439005.pdf

Text

03.01.2019

Schneider Electric Pro-face GP-Pro EX

Titel

Schneider Electric Pro-face GP-Pro EX

Veröffentlicht

3. Januar 2019 16:10

URL

https://ics-cert.us-cert.gov/advisories/ICSA-19-003-01

Text

This advisory provides mitigation recommendations for an improper input validation vulnerability in Schneider Electric's Pro-face GP-Pro EX, an HMI screen editor and logic programming software.

03.01.2019

Yokogawa Vnet/IP Open Communication Driver

Titel

Yokogawa Vnet/IP Open Communication Driver

Veröffentlicht

3. Januar 2019 16:05

URL

https://ics-cert.us-cert.gov/advisories/ICSA-19-003-02

Text

This advisory provides mitigation recommendations for a resource management error vulnerability in Yokogawa's Vnet/IP open communication driver.

03.01.2019

https://ics-cert.us-cert.gov/advisories/ICSA-19-003-03

Hetronic Nova-M

Titel

Hetronic Nova-M

Veröffentlicht

3. Januar 2019 16:00

URL

Text

This advisory provides mitigation recommendations for an authentication bypass by capture-relay vulnerability in Hetronic's Nova-M remote control transmitters and receivers.

Dezember 2018

20.12.2018

Horner Automation Cscape

Titel

Horner Automation Cscape

Veröffentlicht

20. Dezember 2018 16:10

URL

https://ics-cert.us-cert.gov/advisories/ICSA-18-354-01

Text

This advisory provides mitigation recommendations for an improper input validation vulnerability in Horner Automation’s Cscape, a Control System Application programming software.

20.12.2018

Schneider Electric EcoStruxure

Titel

Schneider Electric EcoStruxure

Veröffentlicht

20. Dezember 2018 16:05

URL

https://ics-cert.us-cert.gov/advisories/ICSA-18-354-02

Text

This advisory provides mitigation recommendations for an open redirect vulnerability in Schneider Electric’s EcoStruxure, an IoT-enabled architecture and platform.

20.12.2018

Rockwell Automation FactoryTalk Services Platform

Titel

Rockwell Automation FactoryTalk Services Platform

Veröffentlicht

20. Dezember 2018 16:00

URL

https://ics-cert.us-cert.gov/advisories/ICSA-18-331-02

Text

This advisory was originally posted to the HSIN ICS-CERT library on November 27, 2018, and is being released to the NCCIC/ICS-CERT website. This advisory provides mitigation recommendations for a heap-based buffer overflow vulnerability in the Rockwell Automation FactoryTalk Services Platform.

https://ics-cert.us-cert.gov/advisories/ICSA-18-352-01

ABB GATE-E2

Titel

ABB GATE-E2

Veröffentlicht

18. Dezember 2018 16:30

URL

Text

This advisory provides mitigation recommendations for missing authentication for critical function and cross-site scripting vulnerabilities in ABB's GATE-E2 ethernet devices.

3S-Smart Software Solutions GmbH CODESYS Control V3 Products

Titel

3S-Smart Software Solutions GmbH CODESYS Control V3 Products

Veröffentlicht

18. Dezember 2018 16:20

URL

https://ics-cert.us-cert.gov/advisories/ICSA-18-352-03

Text

This advisory provides mitigation recommendations for an improper access control vulnerability identified in the 3S-Smart Software Solutions CODESYS Control V3 products.

3S-Smart Software Solutions GmbH CODESYS V3 Products

Titel

3S-Smart Software Solutions GmbH CODESYS V3 Products

Veröffentlicht

18. Dezember 2018 16:15

URL

https://ics-cert.us-cert.gov/advisories/ICSA-18-352-04

Text

This advisory provides mitigation recommendations for use of insufficiently random values and improper restriction of communication channel to intended endpoints vulnerabilities identified in the 3S-Smart Software Solutions GmbH CODESYS V3 products.

Siemens TIM 1531 IRC Modules

Titel

Siemens TIM 1531 IRC Modules

Veröffentlicht

18. Dezember 2018 16:10

URL

https://ics-cert.us-cert.gov/advisories/ICSA-18-352-05

Text

This advisory provides mitigation recommendations for a missing authentication for critical function vulnerability in Siemens' TIM 1531 IRC modules.

https://ics-cert.us-cert.gov/advisories/ICSA-18-352-06

ABB CMS-770

Titel

ABB CMS-770

Veröffentlicht

18. Dezember 2018 16:05

URL

Text

This advisory includes mitigations for an improper authentication vulnerability in the ABB CMS-770 software.

https://ics-cert.us-cert.gov/advisories/ICSA-18-352-07

ABB M2M ETHERNET

Titel

ABB M2M ETHERNET

Veröffentlicht

18. Dezember 2018 16:00

URL

Text

This advisory includes mitigations for an improper authentication vulnerability in the ABB M2M Ethernet software.

17.12.2018

SSA-982399 (Last Update: 2018-12-17): Missing Authentication in TIM 1531 IRC Modules

Titel

SSA-982399 (Last Update: 2018-12-17): Missing Authentication in TIM 1531 IRC Modules

Veröffentlicht

17. Dezember 2018 01:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-982399.pdf

Text

The latest update for TIM 1531 IRC fixes a vulnerability. The devices was missing proper authentication when connecting on port 102/tcp, although configured. An attacker needs to be able to connect to port 102/tcp of an affected device in order to exploit this vulnerability. The vulnerability could allow an attacker ...

13.12.2018