September 2024
10.09.2024
SIEMENS CERT
SSA-673996 V1.0: Buffer Overflow Vulnerability in Third-Party Component in SICAM and SITIPE Products
Titel
SSA-673996 V1.0: Buffer Overflow Vulnerability in Third-Party Component in SICAM and SITIPE Products
Veröffentlicht
10. September 2024 02:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-673996.html
Text
Multiple SICAM products are affected by buffer overflow vulnerability in the IEC 61850 Client libraries from Triangle MicroWorks that could allow an unauthenticated remote attacker to create a denial of service condition by sending specially crafted MMS messages. Affected SICAM and SITIPE products: SICAM A8000 Device firmware ETI5 for CP-8031/CP-8050 ...
10.09.2024
SIEMENS CERT
SSA-690517 V1.1 (Last Update: 2024-09-10): Multiple Vulnerabilities in SCALANCE W700 802.11 AX Family
Titel
SSA-690517 V1.1 (Last Update: 2024-09-10): Multiple Vulnerabilities in SCALANCE W700 802.11 AX Family
Veröffentlicht
10. September 2024 02:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-690517.html
Text
SCALANCE W700 802.11 AX Family is affected by multiple vulnerabilities. Siemens recommends countermeasures for products where fixes are not, or not yet available.
10.09.2024
SIEMENS CERT
SSA-629254 V1.0: Remote Code Execution Vulnerability in SIMATIC SCADA and PCS 7 systems
Titel
SSA-629254 V1.0: Remote Code Execution Vulnerability in SIMATIC SCADA and PCS 7 systems
Veröffentlicht
10. September 2024 02:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-629254.html
Text
The products listed below contain a remote code execution vulnerability that could allow an unauthenticated remote attacker to execute arbitrary code with high privileges. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens is preparing further fix versions and recommends countermeasures ...
10.09.2024
SIEMENS CERT
SSA-566905 V1.3 (Last Update: 2024-09-10): Multiple Denial of Service Vulnerabilities in the Webserver of Industrial Products
Titel
SSA-566905 V1.3 (Last Update: 2024-09-10): Multiple Denial of Service Vulnerabilities in the Webserver of Industrial Products
Veröffentlicht
10. September 2024 02:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-566905.html
Text
Multiple vulnerabilities in the affected products could allow an unauthorized attacker with network access to the webserver of an affected products to perform a denial of service attack. Siemens has released new versions for the affected products and recommends to update to the latest versions.
10.09.2024
SIEMENS CERT
SSA-691715 V1.6 (Last Update: 2024-09-10): Vulnerability in OPC Foundation Local Discovery Server Affecting Siemens Products
Titel
SSA-691715 V1.6 (Last Update: 2024-09-10): Vulnerability in OPC Foundation Local Discovery Server Affecting Siemens Products
Veröffentlicht
10. September 2024 02:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-691715.html
Text
A vulnerability was identified in OPC Foundation Local Discovery Server which also affects Siemens products that could allow an attacker to escalate privileges under certain circumstances. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens recommends specific countermeasures for products where ...
10.09.2024
SIEMENS CERT
SSA-349422 V2.1 (Last Update: 2024-09-10): Denial of Service Vulnerability in Industrial Real-Time (IRT) Devices
Titel
SSA-349422 V2.1 (Last Update: 2024-09-10): Denial of Service Vulnerability in Industrial Real-Time (IRT) Devices
Veröffentlicht
10. September 2024 02:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-349422.html
Text
A vulnerability in the affected products could allow an unauthorized attacker with network access to perform a denial-of-service attack resulting in loss of real-time synchronization. Siemens has released updates for several affected products and recommends to update to the latest versions. Siemens recommends specific countermeasures for products where updates are ...
10.09.2024
SIEMENS CERT
SSA-455250 V1.3 (Last Update: 2024-09-10): Multiple Vulnerabilities in Palo Alto Networks Virtual NGFW on RUGGEDCOM APE1808 Dev...
Titel
SSA-455250 V1.3 (Last Update: 2024-09-10): Multiple Vulnerabilities in Palo Alto Networks Virtual NGFW on RUGGEDCOM APE1808 Devices Before V11.1.2-h3
Veröffentlicht
10. September 2024 02:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-455250.html
Text
Palo Alto Networks has published [1] information on vulnerabilities in PAN-OS. This advisory lists the related Siemens Industrial products affected by these vulnerabilities. Siemens has released a new version of Palo Alto Networks Virtual NGFW for RUGGEDCOM APE1808 and recommends to update to the latest version. Customers are advised to ...
10.09.2024
SIEMENS CERT
SSA-753746 V1.4 (Last Update: 2024-09-10): Denial of Service Vulnerabilities in SIMATIC WinCC Affecting Other SIMATIC Software ...
Titel
SSA-753746 V1.4 (Last Update: 2024-09-10): Denial of Service Vulnerabilities in SIMATIC WinCC Affecting Other SIMATIC Software Products
Veröffentlicht
10. September 2024 02:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-753746.html
Text
Two null point dereference vulnerabilities affect multiple SIMATIC software products. These could allow an attacker to cause a persistent denial of service condition in the RPC Server of these products. Siemens has released new versions for the affected products and recommends to update to the latest versions.
10.09.2024
SIEMENS CERT
SSA-721642 V1.0: Injection Vulnerability in SCALANCE W700 802.11 AX Family Before V2.4
Titel
SSA-721642 V1.0: Injection Vulnerability in SCALANCE W700 802.11 AX Family Before V2.4
Veröffentlicht
10. September 2024 02:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-721642.html
Text
Siemens has released new versions for the affected products and recommends to update to the latest versions.
10.09.2024
SIEMENS CERT
SSA-342438 V1.0: Privilege Escalation Vulnerability in SINUMERIK ONE, SINUMERIK 840D and SINUMERIK 828D
Titel
SSA-342438 V1.0: Privilege Escalation Vulnerability in SINUMERIK ONE, SINUMERIK 840D and SINUMERIK 828D
Veröffentlicht
10. September 2024 02:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-342438.html
Text
SINUMERIK ONE, SINUMERIK 840D sl and SINUMERIK 828D are affected by a privilege escalation vulnerability that could allow an authenticated local attacker to escalate their privileges in the underlying system. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens recommends countermeasures ...
10.09.2024
SIEMENS CERT
SSA-698820 V1.2 (Last Update: 2024-09-10): Multiple Vulnerabilities in Fortigate NGFW on RUGGEDCOM APE1808 Devices
Titel
SSA-698820 V1.2 (Last Update: 2024-09-10): Multiple Vulnerabilities in Fortigate NGFW on RUGGEDCOM APE1808 Devices
Veröffentlicht
10. September 2024 02:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-698820.html
Text
Fortinet has published information on vulnerabilities in FORTIOS. This advisory lists the related Siemens Industrial products. Siemens is preparing updates and recommends specific countermeasures for products where updates are not, or not yet available. Siemens recommends to consult and implement the workarounds provided in Fortinet’s upstream security notifications.
10.09.2024
SIEMENS CERT
SSA-969738 V1.0: Denial of Service Vulnerability in SIMATIC S7-200 SMART Devices
Titel
SSA-969738 V1.0: Denial of Service Vulnerability in SIMATIC S7-200 SMART Devices
Veröffentlicht
10. September 2024 02:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-969738.html
Text
A vulnerability in SIMATIC S7-200 SMART devices could allow an attacker to cause a denial of service condition if a specially crafted TCP packet is sent to the device. Siemens recommends specific countermeasures for products where fixes are not, or not yet available.
10.09.2024
SIEMENS CERT
SSA-293562 V3.6 (Last Update: 2024-09-10): Denial of Service Vulnerabilities in PROFINET DCP Implementation of Industrial Products
Titel
SSA-293562 V3.6 (Last Update: 2024-09-10): Denial of Service Vulnerabilities in PROFINET DCP Implementation of Industrial Products
Veröffentlicht
10. September 2024 02:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-293562.html
Text
Several industrial devices are affected by two vulnerabilities that could allow an attacker to cause a denial of service condition via PROFINET DCP network packets under certain circumstances. The precondition for this scenario is a direct layer 2 access to the affected products. PROFIBUS interfaces are not affected. Siemens has ...
10.09.2024
SIEMENS CERT
SSA-765405 V1.0: Multiple Vulnerabilities in SIMATIC RFID Readers
Titel
SSA-765405 V1.0: Multiple Vulnerabilities in SIMATIC RFID Readers
Veröffentlicht
10. September 2024 02:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-765405.html
Text
SIMATIC RFID Readers contain multiple vulnerabilities that could allow an attacker to cause Denial-of-Service, exploit hidden functionality and information exposure. Siemens has released new versions for the affected products and recommends to update to the latest versions.
10.09.2024
SIEMENS CERT
SSA-869574 V1.0: Multiple Vulnerabilities in SINEMA Remote Connect Server Before V3.2 SP2
Titel
SSA-869574 V1.0: Multiple Vulnerabilities in SINEMA Remote Connect Server Before V3.2 SP2
Veröffentlicht
10. September 2024 02:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-869574.html
Text
SINEMA Remote Connect Server before V3.2 SP2 is affected by multiple vulnerabilities. Siemens has released a new version for SINEMA Remote Connect Client and recommends to update to the latest version.
10.09.2024
SIEMENS CERT
SSA-844582 V1.1 (Last Update: 2024-09-10): Electromagnetic Fault Injection in LOGO! V8.3 BM Devices Results in Broken LOGO! V8....
Titel
SSA-844582 V1.1 (Last Update: 2024-09-10): Electromagnetic Fault Injection in LOGO! V8.3 BM Devices Results in Broken LOGO! V8.3 Product CA
Veröffentlicht
10. September 2024 02:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-844582.html
Text
LOGO! V8.3 BM (incl. SIPLUS variants) devices contain a vulnerability that could allow an electromagnetic fault injection. This could allow an attacker to dump and debug the firmware, including the manipulation of memory. Further actions could allow to inject public keys of custom created key pairs which are then signed ...
10.09.2024
SIEMENS CERT
SSA-883918 V1.1 (Last Update: 2024-09-10): Information Disclosure Vulnerability in SIMATIC WinCC
Titel
SSA-883918 V1.1 (Last Update: 2024-09-10): Information Disclosure Vulnerability in SIMATIC WinCC
Veröffentlicht
10. September 2024 02:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-883918.html
Text
Multiple versions of SIMATIC WinCC and SIMATIC PCS 7 do not properly handle certain requests to their web application (WinCC WebNavigator, PCS 7 Web Server, and PCS 7 Web Diagnostics Server), which may lead to the leak of privileged information. This could allow an unauthenticated remote attacker to retrieve information ...
10.09.2024
SIEMENS CERT
SSA-832273 V1.5 (Last Update: 2024-09-10): Multiple Vulnerabilities in Fortigate NGFW Before V7.4.3 on RUGGEDCOM APE1808 Devices
Titel
SSA-832273 V1.5 (Last Update: 2024-09-10): Multiple Vulnerabilities in Fortigate NGFW Before V7.4.3 on RUGGEDCOM APE1808 Devices
Veröffentlicht
10. September 2024 02:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-832273.html
Text
Fortinet has published information on vulnerabilities in FORTIOS. This advisory lists the related Siemens Industrial products. Siemens has released a new version of Fortigate NGFW for RUGGEDCOM APE1808 and recommends to update to the latest version. Siemens recommends to consult and implement the workarounds provided in Fortinet’s upstream security notifications.
10.09.2024
SIEMENS CERT
SSA-999588 V1.5 (Last Update: 2024-09-10): Multiple Vulnerabilities in User Management Component (UMC) Before V2.11.2
Titel
SSA-999588 V1.5 (Last Update: 2024-09-10): Multiple Vulnerabilities in User Management Component (UMC) Before V2.11.2
Veröffentlicht
10. September 2024 02:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-999588.html
Text
Siemens User Management Component (UMC) before V2.11.2 is affected by multiple vulnerabilities where the most severe could lead to a restart of the UMC server. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens recommends specific countermeasures for products where fixes ...
10.09.2024
SIEMENS CERT
SSA-792319 V1.1 (Last Update: 2024-09-10): Missing Read Out Protection in SENTRON 7KM PAC3x20 Devices
Titel
SSA-792319 V1.1 (Last Update: 2024-09-10): Missing Read Out Protection in SENTRON 7KM PAC3x20 Devices
Veröffentlicht
10. September 2024 02:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-792319.html
Text
The read out protection of the internal flash of affected devices was not properly set at the end of the manufacturing process. An attacker with physical access to the device could read out the data. Siemens has released new versions for the affected products and recommends to update to the ...
10.09.2024
SIEMENS CERT
SSA-955858 V1.2 (Last Update: 2024-09-10): Multiple Vulnerabilities in LOGO! 8 BM Devices
Titel
SSA-955858 V1.2 (Last Update: 2024-09-10): Multiple Vulnerabilities in LOGO! 8 BM Devices
Veröffentlicht
10. September 2024 02:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-955858.html
Text
LOGO! 8 BM (incl. SIPLUS variants) contains multiple web-related vulnerabilities. These could allow an attacker to execute code remotely, put the device into a denial of service state or retrieve parts of the memory. The vulnerabilities are related to the hardware of the product. Siemens has released new hardware versions ...
10.09.2024
SIEMENS CERT
SSA-921449 V1.1 (Last Update: 2024-09-10): Plaintext Storage of a Password Vulnerability in LOGO! V8.3 BM Devices
Titel
SSA-921449 V1.1 (Last Update: 2024-09-10): Plaintext Storage of a Password Vulnerability in LOGO! V8.3 BM Devices
Veröffentlicht
10. September 2024 02:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-921449.html
Text
LOGO! V8.3 BM (incl. SIPLUS variants) devices contain a plaintext storage of a password vulnerability. This could allow an attacker with phyiscal access to an affected device to extract user-set passwords from an embedded storage IC. Siemens has released new hardware versions with the LOGO! V8.4 BM and the SIPLUS ...
10.09.2024
SIEMENS CERT
SSA-962515 V1.2 (Last Update: 2024-09-10): Out of Bounds Read Vulnerability in Industrial Products
Titel
SSA-962515 V1.2 (Last Update: 2024-09-10): Out of Bounds Read Vulnerability in Industrial Products
Veröffentlicht
10. September 2024 02:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-962515.html
Text
Several industrial products contain an out of bounds read vulnerability that could allow an attacker to cause a Blue Screen of Death (BSOD) crash of the underlying Windows kernel, leading to denial of service condition. Siemens has released new versions for several affected products and recommends to update to the ...
10.09.2024
SIEMENS CERT
SSA-783481 V1.2 (Last Update: 2024-09-10): Denial-of-Service Vulnerability in LOGO! 8 BM
Titel
SSA-783481 V1.2 (Last Update: 2024-09-10): Denial-of-Service Vulnerability in LOGO! 8 BM
Veröffentlicht
10. September 2024 02:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-783481.html
Text
A Denial-of-Service vulnerability has been identified in LOGO! 8 BM. This vulnerability could allow an attacker to crash a device, if a user is tricked into loading a malicious project file onto an affected device. The vulnerability is related to the hardware of the product. Siemens has released new hardware ...
10.09.2024
SIEMENS CERT
SSA-097786 V1.0: Insertion of Sensitive Information into Log File Vulnerability in SINUMERIK systems
Titel
SSA-097786 V1.0: Insertion of Sensitive Information into Log File Vulnerability in SINUMERIK systems
Veröffentlicht
10. September 2024 02:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-097786.html
Text
SINUMERIK systems, that have been provisioned with Create MyConfig (CMC), are affected by a Insertion of Sensitive Information into Log File vulnerability. When using a CMC package on a NCU or on an IPC the password used in the CMC package or typed in manually during package execution is traced ...

Letzte Updates

BOSCH PSIRT
25.04.2025
SIEMENS CERT
23.05.2025
US CERT
20.05.2025
US CERT (ICS)
05.06.2025

Nach Quelle

Archiv

2025
2024
2023
2022
2021
2020
2019
2018
2017

Feeds