März 2025
11.03.2025
SIEMENS CERT
SSA-194557 V1.2 (Last Update: 2025-03-11): Improper Limitation of Filesystem Access through Web Server Vulnerability in SIPROTEC 5
Titel
SSA-194557 V1.2 (Last Update: 2025-03-11): Improper Limitation of Filesystem Access through Web Server Vulnerability in SIPROTEC 5
Veröffentlicht
11. März 2025 01:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-194557.html
Text
Affected SIPROTEC 5 devices do not properly limit the access of the web server to the filesystem. This could allow an authenticated remote attacker to read arbitrary files or the entire filesystem of the device. Siemens has released new versions for several affected products and recommends to update to the ...
11.03.2025
SIEMENS CERT
SSA-073066 V1.0: Multiple Vulnerabilities in SINEMA Remote Connect Server Before V3.2 SP3
Titel
SSA-073066 V1.0: Multiple Vulnerabilities in SINEMA Remote Connect Server Before V3.2 SP3
Veröffentlicht
11. März 2025 01:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-073066.html
Text
SINEMA Remote Connect Server before V3.2 SP3 is affected by multiple vulnerabilities. Siemens has released a new version for SINEMA Remote Connect Server and recommends to update to the latest version.
11.03.2025
SIEMENS CERT
SSA-280834 V1.0: Improper OpenVPN Credential Validation Vulnerability in SCALANCE M-800 and SC-600 Families
Titel
SSA-280834 V1.0: Improper OpenVPN Credential Validation Vulnerability in SCALANCE M-800 and SC-600 Families
Veröffentlicht
11. März 2025 01:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-280834.html
Text
SCALANCE M-800 and SC-600 families are affected by improper input validation in the OpenVPN authentication. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens is preparing further fix versions and recommends specific countermeasures for products where fixes are not, or not ...
11.03.2025
SIEMENS CERT
SSA-265688 V1.4 (Last Update: 2025-03-11): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP ...
Titel
SSA-265688 V1.4 (Last Update: 2025-03-11): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP V1.1
Veröffentlicht
11. März 2025 01:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-265688.html
Text
Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the SIMATIC S7-1500 TM MFP V1.1. Siemens is preparing fix versions and recommends specific countermeasures for products where fixes are not, or not yet available.
11.03.2025
SIEMENS CERT
SSA-248289 V1.3 (Last Update: 2025-03-11): Denial of Service Vulnerabilities in the IPv6 Stack of Nucleus RTOS
Titel
SSA-248289 V1.3 (Last Update: 2025-03-11): Denial of Service Vulnerabilities in the IPv6 Stack of Nucleus RTOS
Veröffentlicht
11. März 2025 01:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-248289.html
Text
The IPv6 stack of the networking component (Nucleus NET) in Nucleus Real-Time Operating System (RTOS) contains two vulnerabilities when processing IPv6 headers which could allow an attacker to cause a denial of service condition. Siemens has released new versions for several affected products and recommends to update to the latest ...
11.03.2025
SIEMENS CERT
SSA-398330 V2.4 (Last Update: 2025-03-11): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 151...
Titel
SSA-398330 V2.4 (Last Update: 2025-03-11): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1
Veröffentlicht
11. März 2025 01:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-398330.html
Text
Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version V3.1 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant). These GNU/Linux vulnerabilities have been externally identified. Siemens is preparing fix versions and recommends specific countermeasures for products where fixes are not, or not ...
11.03.2025
SIEMENS CERT
SSA-832273 V1.7 (Last Update: 2025-03-11): Multiple Vulnerabilities in Fortigate NGFW Before V7.4.3 on RUGGEDCOM APE1808 Devices
Titel
SSA-832273 V1.7 (Last Update: 2025-03-11): Multiple Vulnerabilities in Fortigate NGFW Before V7.4.3 on RUGGEDCOM APE1808 Devices
Veröffentlicht
11. März 2025 01:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-832273.html
Text
Fortinet has published information on vulnerabilities in FORTIOS. This advisory lists the related Siemens Industrial products. Siemens has released a new version of Fortigate NGFW for RUGGEDCOM APE1808 and recommends to update to the latest version. Siemens recommends to consult and implement the workarounds provided in Fortinet’s upstream security notifications.
11.03.2025
SIEMENS CERT
SSA-216014 V1.0: Vulnerabilities in EFI variable of SIMATIC IPCs, SIMATIC Tablet PCs, and SIMATIC Field PGs
Titel
SSA-216014 V1.0: Vulnerabilities in EFI variable of SIMATIC IPCs, SIMATIC Tablet PCs, and SIMATIC Field PGs
Veröffentlicht
11. März 2025 01:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-216014.html
Text
Multiple vulnerabilities has been identified in Siemens SIMATIC IPCs, SIMATIC Tablet PCs, and SIMATIC Field PGs that can allow an authenticated attacker to alter the secure boot and password configurations. Siemens has released new versions of BIOS for several affected products and recommends to update to the latest versions. Siemens ...
11.03.2025
SIEMENS CERT
SSA-054046 V1.3 (Last Update: 2025-03-11): Unauthenticated Information Disclosure in Web Server of SIMATIC S7-1500 CPUs
Titel
SSA-054046 V1.3 (Last Update: 2025-03-11): Unauthenticated Information Disclosure in Web Server of SIMATIC S7-1500 CPUs
Veröffentlicht
11. März 2025 01:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-054046.html
Text
Several SIMATIC S7-1500 CPU versions are affected by an authentication bypass vulnerability that could allow an unauthenticated remote attacker to gain knowledge about actual and configured maximum cycle times and communication load of the CPU. Siemens has released new versions for several affected products and recommends to update to the ...
11.03.2025
SIEMENS CERT
SSA-195895 V1.1 (Last Update: 2025-03-11): User Enumeration Vulnerability in the Webserver of SIMATIC Products
Titel
SSA-195895 V1.1 (Last Update: 2025-03-11): User Enumeration Vulnerability in the Webserver of SIMATIC Products
Veröffentlicht
11. März 2025 01:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-195895.html
Text
The webserver of several SIMATIC products is affected by a user enumeration vulnerability that could allow an unauthenticated remote attacker to identify valid usernames. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens is preparing further fix versions and recommends specific ...
Februar 2025
25.02.2025
SIEMENS CERT
SSA-656895 V1.1 (Last Update: 2025-02-25): Open Redirect Vulnerability in Teamcenter
Titel
SSA-656895 V1.1 (Last Update: 2025-02-25): Open Redirect Vulnerability in Teamcenter
Veröffentlicht
25. Februar 2025 01:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-656895.html
Text
The SSO login service in Teamcenter contains an open redirect vulnerability that could allow an attacker to redirect the legitimate user to an attacker-chosen URL to steal valid session data. Siemens is preparing fix versions and recommends specific countermeasures for products where fixes are not, or not yet available.
19.02.2025
SIEMENS CERT
SSA-354569 V1.2 (Last Update: 2025-02-19): Multiple Vulnerabilities in Palo Alto Networks PAN-OS on RUGGEDCOM APE1808 Devices
Titel
SSA-354569 V1.2 (Last Update: 2025-02-19): Multiple Vulnerabilities in Palo Alto Networks PAN-OS on RUGGEDCOM APE1808 Devices
Veröffentlicht
19. Februar 2025 01:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-354569.html
Text
Palo Alto Networks has published [1] information on vulnerabilities in PAN-OS. This advisory lists the related Siemens Industrial products affected by these vulnerabilities. Siemens is preparing fix versions and recommends countermeasures for products where fixes are not, or not yet available. [1] https://security.paloaltonetworks.com/
17.02.2025
SIEMENS CERT
SSA-992434 V1.0: Directory Traversal Vulnerability in Third-Party Component in SiPass integrated
Titel
SSA-992434 V1.0: Directory Traversal Vulnerability in Third-Party Component in SiPass integrated
Veröffentlicht
17. Februar 2025 01:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-992434.html
Text
SiPass integrated is affected by a directory traversal vulnerability in the third-party component DotNetZip. The vulnerability could allow an attacker to execute arbitrary code on the application server, if a specially crafted backup set is used for a restore. Siemens has released a new version for SiPass integrated and recommends ...
14.02.2025
SIEMENS CERT
SSA-246355 V1.1 (Last Update: 2025-02-14): Multiple Vulnerabilities in Tableau Server Component of Opcenter Intelligence
Titel
SSA-246355 V1.1 (Last Update: 2025-02-14): Multiple Vulnerabilities in Tableau Server Component of Opcenter Intelligence
Veröffentlicht
14. Februar 2025 01:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-246355.html
Text
The Tableau Server component in Opcenter Intelligence contains multiple vulnerabilities as described below. Siemens has released a new version for Opcenter Intelligence and recommends to update to the latest version and to install the latest available version of Tableau Server as described in https://support.sw.siemens.com/knowledge-base/PL8822108.
11.02.2025
SIEMENS CERT
SSA-832273 V1.6 (Last Update: 2025-02-11): Multiple Vulnerabilities in Fortigate NGFW Before V7.4.3 on RUGGEDCOM APE1808 Devices
Titel
SSA-832273 V1.6 (Last Update: 2025-02-11): Multiple Vulnerabilities in Fortigate NGFW Before V7.4.3 on RUGGEDCOM APE1808 Devices
Veröffentlicht
11. Februar 2025 01:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-832273.html
Text
Fortinet has published information on vulnerabilities in FORTIOS. This advisory lists the related Siemens Industrial products. Siemens has released a new version of Fortigate NGFW for RUGGEDCOM APE1808 and recommends to update to the latest version. Siemens recommends to consult and implement the workarounds provided in Fortinet’s upstream security notifications.
11.02.2025
SIEMENS CERT
SSA-770770 V1.0: Multiple Vulnerabilities in Fortigate NGFW on RUGGEDCOM APE1808 Devices
Titel
SSA-770770 V1.0: Multiple Vulnerabilities in Fortigate NGFW on RUGGEDCOM APE1808 Devices
Veröffentlicht
11. Februar 2025 01:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-770770.html
Text
Fortinet has published information on vulnerabilities in FortiOS. This advisory lists the related Siemens Industrial products. Siemens is preparing fix versions and recommends to consult and implement the workarounds provided in Fortinet’s upstream security notifications.
11.02.2025
SIEMENS CERT
SSA-194557 V1.1 (Last Update: 2025-02-11): Improper Limitation of Filesystem Access through Web Server Vulnerability in SIPROTEC 5
Titel
SSA-194557 V1.1 (Last Update: 2025-02-11): Improper Limitation of Filesystem Access through Web Server Vulnerability in SIPROTEC 5
Veröffentlicht
11. Februar 2025 01:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-194557.html
Text
Affected SIPROTEC 5 devices do not properly limit the access of the web server to the filesystem. This could allow an authenticated remote attacker to read arbitrary files or the entire filesystem of the device. Siemens has released new versions for several affected products and recommends to update to the ...
11.02.2025
SIEMENS CERT
SSA-111547 V1.0: Cleartext Storage of Sensitive Information Vulnerability in SIPROTEC 5
Titel
SSA-111547 V1.0: Cleartext Storage of Sensitive Information Vulnerability in SIPROTEC 5
Veröffentlicht
11. Februar 2025 01:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-111547.html
Text
Affected SIPROTEC 5 devices do not encrypt certain data within the on-board flash storage on their PCB. This could allow an attacker with physical access to read the sensitive information from the filesystem of the device. Siemens is preparing fix versions and recommends specific countermeasures for products where fixes are ...
11.02.2025
SIEMENS CERT
SSA-195895 V1.0: User Enumeration Vulnerability in the Webserver of SIMATIC Products
Titel
SSA-195895 V1.0: User Enumeration Vulnerability in the Webserver of SIMATIC Products
Veröffentlicht
11. Februar 2025 01:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-195895.html
Text
The webserver of several SIMATIC products is affected by a user enumeration vulnerability that could allow an unauthenticated remote attacker to identify valid usernames. Siemens has released new versions for several affected products and recommends to update to the latest versions. Siemens is preparing further fix versions and recommends specific ...
11.02.2025
SIEMENS CERT
SSA-196737 V1.1 (Last Update: 2025-02-11): Multiple Vulnerabilities in SINEC Traffic Analyzer Before V1.2
Titel
SSA-196737 V1.1 (Last Update: 2025-02-11): Multiple Vulnerabilities in SINEC Traffic Analyzer Before V1.2
Veröffentlicht
11. Februar 2025 01:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-196737.html
Text
SINEC Traffic Analyzer before V1.2 is affected by multiple vulnerabilities. Siemens has released a new version for SINEC Traffic Analyzer and recommends to update to the latest version.
11.02.2025
SIEMENS CERT
SSA-246355 V1.0: Multiple Vulnerabilities in Tableau Server Component of Opcenter Intelligence
Titel
SSA-246355 V1.0: Multiple Vulnerabilities in Tableau Server Component of Opcenter Intelligence
Veröffentlicht
11. Februar 2025 01:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-246355.html
Text
The Tableau Server component in Opcenter Intelligence contains multiple vulnerabilities as described below. Siemens has released a new version for Opcenter Intelligence and recommends to update to the latest version and to install the latest available version of Tableau Server as described in https://support.sw.siemens.com/knowledge-base/PL8822108.
11.02.2025
SIEMENS CERT
SSA-224824 V1.0: Denial of Service Vulnerabilities in SIMATIC S7-1200 CPU Family Before V4.7
Titel
SSA-224824 V1.0: Denial of Service Vulnerabilities in SIMATIC S7-1200 CPU Family Before V4.7
Veröffentlicht
11. Februar 2025 01:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-224824.html
Text
SIMATIC S7-1200 CPU family before V4.7 is affected by two denial of service vulnerabilities. Siemens has released new versions for the affected products and recommends to update to the latest versions.
11.02.2025
SIEMENS CERT
SSA-342348 V1.0: Insufficient Session Expiration Vulnerability in Siemens Products
Titel
SSA-342348 V1.0: Insufficient Session Expiration Vulnerability in Siemens Products
Veröffentlicht
11. Februar 2025 01:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-342348.html
Text
Affected products do not correctly invalidate user sessions upon user logout. This could allow a remote unauthenticated attacker, who has obtained the session token by other means, to re-use a legitimate user’s session even after logout. Siemens has released new versions for several affected products and recommends to update to ...
11.02.2025
SIEMENS CERT
SSA-615116 V1.0: Multiple Vulnerabilities in Apogee PXC and Talon TC Devices
Titel
SSA-615116 V1.0: Multiple Vulnerabilities in Apogee PXC and Talon TC Devices
Veröffentlicht
11. Februar 2025 01:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-615116.html
Text
Apogee PXC and Talon TC contain a vulnerability that could allow an attacker to perform a denial of service using a out-of-bounds read forcing the device to enter a cold state and a vulnerability that would allow an attacker to decrypt the passwords of the device. Siemens recommends countermeasures for ...
11.02.2025
SIEMENS CERT
SSA-398330 V2.3 (Last Update: 2025-02-11): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 151...
Titel
SSA-398330 V2.3 (Last Update: 2025-02-11): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP V3.1
Veröffentlicht
11. Februar 2025 01:00
URL
https://cert-portal.siemens.com/productcert/html/ssa-398330.html
Text
Multiple vulnerabilities have been identified in the additional GNU/Linux subsystem of the firmware version V3.1 for the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP (incl. SIPLUS variant). These GNU/Linux vulnerabilities have been externally identified. Siemens is preparing fix versions and recommends specific countermeasures for products where fixes are not, or not ...

Letzte Updates

BOSCH PSIRT
14.08.2025
SIEMENS CERT
26.08.2025
US CERT
25.08.2025
US CERT (ICS)
28.08.2025

Nach Quelle

Archiv

2025
2024
2023
2022
2021
2020
2019
2018
2017

Feeds