Bulletins | CERT@VDE

SSA-254686 (Last Update: 2018-10-09): Foreshadow / L1 Terminal Fault Vulnerabilities in Industrial Products

Titel

SSA-254686 (Last Update: 2018-10-09): Foreshadow / L1 Terminal Fault Vulnerabilities in Industrial Products

Veröffentlicht

9. Oktober 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-254686.pdf

Text

Security researchers published information on vulnerabilities known as Foreshadow and L1 Terminal Fault (L1TF). These vulnerabilities affect many modern processors from different vendors to a varying degree. Several Siemens Industrial Products contain processors that are affected by the vulnerabilities.

SSA-592007 (Last Update: 2018-10-09): Denial-of-Service Vulnerability in Industrial Products

Titel

SSA-592007 (Last Update: 2018-10-09): Denial-of-Service Vulnerability in Industrial Products

Veröffentlicht

9. Oktober 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-592007.pdf

Text

Several industrial controllers are affected by a security vulnerability that could allow an attacker to cause a Denial-of-Service condition via PROFINET DCP network packets under certain circumstances. Precondition for this scenario is a direct OSI Layer 2 access to the affected products. PROFIBUS interfaces are not affected. Siemens has released ...

SSA-979106 (Last Update: 2018-10-09): Vulnerabilities in SIMATIC STEP 7 (TIA Portal) and SIMATIC WinCC (TIA Portal)

Titel

SSA-979106 (Last Update: 2018-10-09): Vulnerabilities in SIMATIC STEP 7 (TIA Portal) and SIMATIC WinCC (TIA Portal)

Veröffentlicht

9. Oktober 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-979106.pdf

Text

The latest updates for SIMATIC STEP 7 (TIA Portal) and SIMATIC WinCC (TIA Portal) fix two vulnerabilities. These two vulnerabilities could either allow an attacker with local file write access to manipulate files and cause a Denial-of-service-condition, or execute code both on the manipulated installation and on devices that are ...

SSA-507847 (Last Update: 2018-10-09): Cross-Site Request Forgery Vulnerability in SIMATIC S7-1200 CPU Family Version 4

Titel

SSA-507847 (Last Update: 2018-10-09): Cross-Site Request Forgery Vulnerability in SIMATIC S7-1200 CPU Family Version 4

Veröffentlicht

9. Oktober 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-507847.pdf

Text

The latest firmware update for S7-1200 CPU family version 4 fixes a Cross-Site Request Forgery vulnerability. Siemens recommends to update affected devices as soon as possible.

SSA-546832 (Last Update: 2018-10-09): Vulnerabilities in Medium Voltage SINAMICS Products

Titel

SSA-546832 (Last Update: 2018-10-09): Vulnerabilities in Medium Voltage SINAMICS Products

Veröffentlicht

9. Oktober 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-546832.pdf

Text

The latest updates for medium voltage SINAMICS products fix two security vulnerabilities that could allow an attacker to cause a Denial-of-Service condition either via specially crafted PROFINET DCP broadcast packets or by sending specially crafted packets to port 161/udp (SNMP). Precondition for the PROFINET DCP scenario is a direct Layer ...

SSA-464260 (Last Update: 2018-10-09): TLS ROBOT vulnerability in SCALANCE W1750D

Titel

SSA-464260 (Last Update: 2018-10-09): TLS ROBOT vulnerability in SCALANCE W1750D

Veröffentlicht

9. Oktober 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-464260.pdf

Text

The latest update for SCALANCE W1750D addresses a vulnerability known as ROBOT Attack. The vulnerability could allow an attacker to decrypt TLS traffic. Siemens provides a firmware update and recommends users to update to the new version.

SSA-346262 (Last Update: 2018-10-09): Denial-of-Service in Industrial Products

Titel

SSA-346262 (Last Update: 2018-10-09): Denial-of-Service in Industrial Products

Veröffentlicht

9. Oktober 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-346262.pdf

Text

Several industrial products are affected by a vulnerability that could allow remote attackers to conduct a Denial-of-Service (DoS) attack by sending specially crafted packets to port 161/udp (SNMP). Siemens has released updates for several affected products, and recommends that customers update to the new version. Siemens is preparing further updates ...

SSA-493830 (Last Update: 2018-10-09): Privilege Escalation in ROX II

Titel

SSA-493830 (Last Update: 2018-10-09): Privilege Escalation in ROX II

Veröffentlicht

9. Oktober 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-493830.pdf

Text

The latest update for ROX II fixes two vulnerabilities. One vulnerability could allow an attacker with a low-privileged user account to execute arbitrary commands. The other vulnerability could allow an attacker with a low-privileged user account to escalate his privileges. Siemens recommends to update to the new version as soon ...

SSA-348629 (Last Update: 2018-10-09): Denial-of-Service Vulnerability in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Pr...

Titel

SSA-348629 (Last Update: 2018-10-09): Denial-of-Service Vulnerability in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Professional and SIMATIC NET PC Software

Veröffentlicht

9. Oktober 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-348629.pdf

Text

A Denial-of-Service vulnerability has been identified in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Professional and SIMATIC NET PC-Software. Siemens has released updates for several affected products and recommends that customers update to the new version. Siemens is preparing further updates and recommends specific countermeasures until patches are available.

SSA-347726 (Last Update: 2018-10-09): Denial-of-Service Vulnerability in SIMATIC S7-1500, SIMATIC S7-1500 Software Controller a...

Titel

SSA-347726 (Last Update: 2018-10-09): Denial-of-Service Vulnerability in SIMATIC S7-1500, SIMATIC S7-1500 Software Controller and SIMATIC ET 200SP Open Controller

Veröffentlicht

9. Oktober 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-347726.pdf

Text

Versions of SIMATIC S7-1500, SIMATIC S7-1500 Software Controller and SIMATIC ET 200 SP Open Controller are affected by a denial-of-service vulnerability. An attacker with network access to the PLC can cause a Denial-of-Service condition on the network stack.

SSA-179516 (Last Update: 2018-10-09): OpenSSL Vulnerability in Industrial Products

Titel

SSA-179516 (Last Update: 2018-10-09): OpenSSL Vulnerability in Industrial Products

Veröffentlicht

9. Oktober 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-179516.pdf

Text

A vulnerability in OpenSSL affects several Siemens industrial products. Siemens has released updates for some affected products and is working on updates for others.

September 2018

SSA-268644 (Last Update: 2018-09-11): Spectre-NG (Variants 3a and 4) Vulnerabilities in Industrial Products

Titel

SSA-268644 (Last Update: 2018-09-11): Spectre-NG (Variants 3a and 4) Vulnerabilities in Industrial Products

Veröffentlicht

11. September 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-268644.pdf

Text

Security researchers published information on vulnerabilities known as Spectre-NG (Variants 3a and 4). These vulnerabilities affect many modern processors from different vendors to a varying degree. Several Industrial Products include affected processors and are affected by the vulnerabilities.

SSA-346256 (Last Update: 2018-09-11): Vulnerability in SIMATIC WinCC OA V3.14 and prior

Titel

SSA-346256 (Last Update: 2018-09-11): Vulnerability in SIMATIC WinCC OA V3.14 and prior

Veröffentlicht

11. September 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-346256.pdf

Text

The latest update for SIMATIC WinCC OA V3.14 fixes a vulnerability that could allow an unauthenticated remote user to escalate its privileges in the context of SIMATIC WinCC OA V3.14. This vulnerability affects SIMATIC WinCC OA V3.14 and prior. SIMATIC WinCC OA V3.15 and V3.16 are not affected by this ...

SSA-346262 (Last Update: 2018-09-11): Denial-of-Service in Industrial Products

Titel

SSA-346262 (Last Update: 2018-09-11): Denial-of-Service in Industrial Products

Veröffentlicht

11. September 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-346262.pdf

Text

SSA-447396 (Last Update: 2018-09-11): Denial-of-Service in SCALANCE X300, SCALANCE X408 and SCALANCE X414

Titel

SSA-447396 (Last Update: 2018-09-11): Denial-of-Service in SCALANCE X300, SCALANCE X408 and SCALANCE X414

Veröffentlicht

11. September 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-447396.pdf

Text

A vulnerability has been identified in the integrated web server of SCALANCE X300, SCALANCE X408, and SCALANCE X414. The vulnerability could allow an attacker with network access to the device to cause a Denial-of-Service condition. The vulnerability can be triggered with publicly available tools, including vulnerability scanners. Siemens provides updates ...

SSA-914382 (Last Update: 2018-09-11): Denial-of-Service Vulnerability in SIMATIC S7-400

Titel

SSA-914382 (Last Update: 2018-09-11): Denial-of-Service Vulnerability in SIMATIC S7-400

Veröffentlicht

11. September 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-914382.pdf

Text

SIMATIC S7-400 CPUs are affected by a security vulnerability which could lead to a Denial-of-Service condition of the PLC if specially crafted packets are received and processed. The affected SIMATIC S7-400 CPU hardware versions are in the product cancellation phase or already phased-out. Siemens recommends customers either upgrading to a ...

SSA-198330 (Last Update: 2018-09-11): Local Privilege Escalation in TD Keypad Designer

Titel

SSA-198330 (Last Update: 2018-09-11): Local Privilege Escalation in TD Keypad Designer

Veröffentlicht

11. September 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-198330.pdf

Text

All versions of the TD Keypad Designer for printing customized lamination sheets for Text Display devices are affected by a DLL hijacking vulnerability that could allow a local low-privileged attacker to escalate his privileges. Text Display devices and TD Keypad Designer have been discontinued in 2012 and were replaced by ...

SSA-179516 (Last Update: 2018-09-11): OpenSSL Vulnerability in Industrial Products

Titel

SSA-179516 (Last Update: 2018-09-11): OpenSSL Vulnerability in Industrial Products

Veröffentlicht

11. September 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-179516.pdf

Text

A vulnerability in OpenSSL affects several Siemens industrial products. Siemens has released updates for some affected products and is working on updates for others.

SSA-168644 (Last Update: 2018-09-11): Spectre and Meltdown Vulnerabilities in Industrial Products

Titel

SSA-168644 (Last Update: 2018-09-11): Spectre and Meltdown Vulnerabilities in Industrial Products

Veröffentlicht

11. September 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-168644.pdf

Text

Security researchers published information on vulnerabilities known as Spectre and Meltdown. These vulnerabilities affect many modern processors from different vendors to a varying degree. Several Industrial Products include affected processors and are affected by the vulnerabilities.

August 2018

17.08.2018

SSB-068644 (Last Update: 2018-08-17): General Customer Information for Speculative Side-Channel Vulnerabilities in Microprocessors

Titel

SSB-068644 (Last Update: 2018-08-17): General Customer Information for Speculative Side-Channel Vulnerabilities in Microprocessors

Veröffentlicht

17. August 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssb-068644.pdf

Text

Security researchers published information on vulnerabilities known as Spectre, Meltdown, Spectre-NG, Lazy FP State Restore, Spectre V1.1, and L1 Terminal Fault/Foreshadow. These vulnerabilities affect many modern processors from different vendors to a varying degree. Siemens is analyzing the impact of these vulnerabilities and of the mitigations released on its own ...

SSA-168644 (Last Update: 2018-08-07): Spectre and Meltdown Vulnerabilities in Industrial Products

Titel

SSA-168644 (Last Update: 2018-08-07): Spectre and Meltdown Vulnerabilities in Industrial Products

Veröffentlicht

7. August 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-168644.pdf

Text

SSA-979106 (Last Update: 2018-08-07): Vulnerabilities in SIMATIC STEP 7 (TIA Portal) and SIMATIC WinCC (TIA Portal)

Titel

SSA-979106 (Last Update: 2018-08-07): Vulnerabilities in SIMATIC STEP 7 (TIA Portal) and SIMATIC WinCC (TIA Portal)

Veröffentlicht

7. August 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-979106.pdf

Text

SSA-179516 (Last Update: 2018-08-07): OpenSSL Vulnerability in Industrial Products

Titel

SSA-179516 (Last Update: 2018-08-07): OpenSSL Vulnerability in Industrial Products

Veröffentlicht

7. August 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-179516.pdf

Text

A vulnerability in OpenSSL affects several Siemens industrial products. Siemens has released updates for some affected products and is working on updates for others.

SSA-920962 (Last Update: 2018-08-07): Vulnerabilities in Automation License Manager

Titel

SSA-920962 (Last Update: 2018-08-07): Vulnerabilities in Automation License Manager

Veröffentlicht

7. August 2018 02:00

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-920962.pdf

Text

The latest updates for Automation License Manager fix two vulnerabilities. One of them could allow an attacker to execute arbitrary code on the target device, the other one could allow an attacker to abuse the target system for basic network scanning.

Juli 2018

11.07.2018