February 2019
12.02.2019
SIEMENS CERT
SSA-284673 (Last Update: 2019-02-12): Vulnerability in Industrial Products
Title
SSA-284673 (Last Update: 2019-02-12): Vulnerability in Industrial Products
Published
Feb. 12, 2019, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-284673.pdf
Summary
Several industrial devices are affected by a vulnerability that could allow an attacker to cause a Denial-of-Service condition via PROFINET DCP network packets under certain circumstances. Precondition for this scenario is a direct Layer 2 access to the affected products. PROFIBUS interfaces are not affected. Siemens has released updates for ...
12.02.2019
SIEMENS CERT
SSA-377318 (Last Update: 2019-02-12): Multiple vulnerabilities in Intel Active Management Technology (AMT) of SIMATIC IPCs
Title
SSA-377318 (Last Update: 2019-02-12): Multiple vulnerabilities in Intel Active Management Technology (AMT) of SIMATIC IPCs
Published
Feb. 12, 2019, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-377318.pdf
Summary
There are multiple vulnerabilities in the Intel Management Engine used in multiple SIMATIC IPC devices that may allow arbitrary code execution, a partial denial of service or information disclosure. For additional information see: https://www.intel.com/content/www/us/en/security-center/advisory/intel-sa-00141.html. Siemens provides updates for the affected devices.
12.02.2019
SIEMENS CERT
SSA-347726 (Last Update: 2019-02-12): Denial-of-Service Vulnerability in SIMATIC S7-1500, SIMATIC S7-1500 Software Controller a...
Title
SSA-347726 (Last Update: 2019-02-12): Denial-of-Service Vulnerability in SIMATIC S7-1500, SIMATIC S7-1500 Software Controller and SIMATIC ET 200SP Open Controller
Published
Feb. 12, 2019, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-347726.pdf
Summary
Versions of SIMATIC S7-1500, SIMATIC S7-1500 Software Controller and SIMATIC ET 200 SP Open Controller are affected by a denial-of-service vulnerability. An attacker with network access to the PLC can cause a Denial-of-Service condition on the network stack.
12.02.2019
SIEMENS CERT
SSB-439005 (Last Update: 2019-02-12): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-...
Title
SSB-439005 (Last Update: 2019-02-12): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP
Published
Feb. 12, 2019, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssb-439005.pdf
Summary
12.02.2019
SIEMENS CERT
SSA-346262 (Last Update: 2019-02-12): Denial-of-Service in Industrial Products
Title
SSA-346262 (Last Update: 2019-02-12): Denial-of-Service in Industrial Products
Published
Feb. 12, 2019, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-346262.pdf
Summary
Several industrial products are affected by a vulnerability that could allow remote attackers to conduct a Denial-of-Service (DoS) attack by sending specially crafted packets to port 161/udp (SNMP). Siemens has released updates for several affected products, and recommends that customers update to the new version. Siemens is preparing further updates ...
12.02.2019
SIEMENS CERT
SSA-268644 (Last Update: 2019-02-12): Spectre-NG (Variants 3a and 4) Vulnerabilities in Industrial Products
Title
SSA-268644 (Last Update: 2019-02-12): Spectre-NG (Variants 3a and 4) Vulnerabilities in Industrial Products
Published
Feb. 12, 2019, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-268644.pdf
Summary
Security researchers published information on vulnerabilities known as Spectre-NG (Variants 3a and 4). These vulnerabilities affect many modern processors from different vendors to a varying degree. Several Industrial Products include affected processors and are affected by the vulnerabilities.
12.02.2019
SIEMENS CERT
SSA-845879 (Last Update: 2019-02-12): Firmware Downgrade Vulnerability in EN100 Ethernet Communication Module for SIPROTEC 4, S...
Title
SSA-845879 (Last Update: 2019-02-12): Firmware Downgrade Vulnerability in EN100 Ethernet Communication Module for SIPROTEC 4, SIPROTEC Compact and Reyrolle
Published
Feb. 12, 2019, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-845879.pdf
Summary
The EN100 Ethernet communication module, which is an optional extension for SIPROTEC 4, SIPROTEC Compact and Reyrolle devices, allows an unauthenticated upload of firmware updates to the communication module in affected versions. Siemens has released updates for several affected products, is working on updates for the remaining affected products, and ...
12.02.2019
SIEMENS CERT
SSA-275839 (Last Update: 2019-02-12): Denial-of-Service Vulnerability in Industrial Products
Title
SSA-275839 (Last Update: 2019-02-12): Denial-of-Service Vulnerability in Industrial Products
Published
Feb. 12, 2019, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-275839.pdf
Summary
Several industrial products are affected by a vulnerability that could allow an attacker to cause a Denial-of-Service condition via PROFINET DCP network packets under certain circumstances. Precondition for this scenario is a direct Layer 2 access to the affected products. Siemens has released updates for several affected products, is working ...
12.02.2019
SIEMENS CERT
SSA-168644 (Last Update: 2019-02-12): Spectre and Meltdown Vulnerabilities in Industrial Products
Title
SSA-168644 (Last Update: 2019-02-12): Spectre and Meltdown Vulnerabilities in Industrial Products
Published
Feb. 12, 2019, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-168644.pdf
Summary
Security researchers published information on vulnerabilities known as Spectre and Meltdown. These vulnerabilities affect many modern processors from different vendors to a varying degree. Several Industrial Products include affected processors and are affected by the vulnerabilities.
12.02.2019
SIEMENS CERT
SSA-579309 (Last Update: 2019-02-12): Denial-of-Service in SICAM A8000 Series
Title
SSA-579309 (Last Update: 2019-02-12): Denial-of-Service in SICAM A8000 Series
Published
Feb. 12, 2019, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-579309.pdf
Summary
The SICAM A8000 RTU series is affected by a security vulnerability that could allow unauthenticated remote users to cause a Denial-of-Service (DoS) condition of the web server of affected products. Siemens has released updates for all product variants and recommends that customers update to the new versions.
12.02.2019
SIEMENS CERT
SSA-760124 (Last Update: 2019-02-12): Multiple Vulnerabilities in Licensing Software for SICAM 230
Title
SSA-760124 (Last Update: 2019-02-12): Multiple Vulnerabilities in Licensing Software for SICAM 230
Published
Feb. 12, 2019, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-760124.pdf
Summary
Multiple vulnerabilities have been identified in the WibuKey Digital Rights Management (DRM) solution, which affect the SICAM 230 process control system. Siemens recommends users to apply the updates to WibuKey Digital Rights Management (DRM) provided by WIBU SYSTEMS AG.
12.02.2019
SIEMENS CERT
SSA-635129 (Last Update: 2019-02-12): Denial-of-Service Vulnerabilities in EN100 Ethernet Communication Module and SIPROTEC 5 r...
Title
SSA-635129 (Last Update: 2019-02-12): Denial-of-Service Vulnerabilities in EN100 Ethernet Communication Module and SIPROTEC 5 relays
Published
Feb. 12, 2019, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-635129.pdf
Summary
The EN100 Ethernet communication module and SIPROTEC 5 relays are affected by security vulnerabilities which could allow an attacker to conduct a Denial-of-Service attack over the network. Siemens has released updates for several affected products, is working on updates for the remaining affected products, and recommends specific countermeasures until fixes ...
12.02.2019
SIEMENS CERT
SSA-254686 (Last Update: 2019-02-12): Foreshadow / L1 Terminal Fault Vulnerabilities in Industrial Products
Title
SSA-254686 (Last Update: 2019-02-12): Foreshadow / L1 Terminal Fault Vulnerabilities in Industrial Products
Published
Feb. 12, 2019, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-254686.pdf
Summary
Security researchers published information on vulnerabilities known as Foreshadow and L1 Terminal Fault (L1TF). These vulnerabilities affect many modern processors from different vendors to a varying degree. Several Siemens Industrial Products contain processors that are affected by the vulnerabilities.
12.02.2019
SIEMENS CERT
SSA-505225 (Last Update: 2019-02-12): Spectre Vulnerabilities in SIMATIC Industrial Thin Client V3
Title
SSA-505225 (Last Update: 2019-02-12): Spectre Vulnerabilities in SIMATIC Industrial Thin Client V3
Published
Feb. 12, 2019, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-505225.pdf
Summary
SIMATIC Industrial Thin Clients V3 contain a processor which is affected by vulnerabilities known under the name Spectre V1 and Spectre V4. Siemens has released updates for the affected products and recommends to update to the latest version.
07.02.2019
US CERT (ICS)
Siemens SICAM A8000 RTU Series
Title
Siemens SICAM A8000 RTU Series
Published
Feb. 7, 2019, 4:05 p.m.
URL
https://ics-cert.us-cert.gov/advisories/ICSA-19-038-01
Summary
This advisory includes mitigations for an uncaught exception vulnerability reported in the Siemens SICAM A8000RTU product.
07.02.2019
US CERT (ICS)
Siemens EN100 Ethernet Module
Title
Siemens EN100 Ethernet Module
Published
Feb. 7, 2019, 4 p.m.
URL
https://ics-cert.us-cert.gov/advisories/ICSA-19-038-02
Summary
This advisory provides mitigation recommendations for an improper input validation vulnerability reported in the Siemens EN100 Ethernet module for the SWT 3000 management platform.
05.02.2019
US CERT (ICS)
AVEVA InduSoft Web Studio and InTouch Edge HMI
Title
AVEVA InduSoft Web Studio and InTouch Edge HMI
Published
Feb. 5, 2019, 4:20 p.m.
URL
https://ics-cert.us-cert.gov/advisories/ICSA-19-036-01
Summary
This advisory provides mitigation recommendations for Missing Authentication for Critical Function and Resource Injection vulnerabilities reported in the AVEVA InduSoft Web Studio and InTouch Edge HMI (formerly InTouch Machine Edition) applications.
05.02.2019
US CERT (ICS)
Rockwell Automation EtherNet/IP Web Server Modules
Title
Rockwell Automation EtherNet/IP Web Server Modules
Published
Feb. 5, 2019, 4:15 p.m.
URL
https://ics-cert.us-cert.gov/advisories/ICSA-19-036-02
Summary
This advisory includes mitigations for an improper input validation vulnerability reported in the Rockwell Automation EtherNet/IP Web Server Modules.
05.02.2019
US CERT (ICS)
Siemens SIMATIC S7-1500 CPU
Title
Siemens SIMATIC S7-1500 CPU
Published
Feb. 5, 2019, 4:05 p.m.
URL
https://ics-cert.us-cert.gov/advisories/ICSA-19-036-04
Summary
This advisory provides mitigation recommendations for uncontrolled resource consumption vulnerabilities reported in Siemens' SIMATIC SV-1500 CPU.
05.02.2019
US CERT (ICS)
Kunbus PR100088 Modbus Gateway
Title
Kunbus PR100088 Modbus Gateway
Published
Feb. 5, 2019, 4 p.m.
URL
https://ics-cert.us-cert.gov/advisories/ICSA-19-036-05
Summary
This advisory provides mitigation recommendations for improper authentication, missing authentication for critical function, and improper input validation vulnerabilities reported in the Kunbus PR100088 Modbus gateway.
05.02.2019
US CERT (ICS)
Kunbus PR100088 Modbus Gateway (Update A)
Title
Kunbus PR100088 Modbus Gateway (Update A)
Published
Feb. 5, 2019, 4 p.m.
URL
https://ics-cert.us-cert.gov/advisories/ICSA-19-036-05
Summary
This updated advisory is a follow-up to the original advisory titled ICSA-19-036-05 Kunbus PR100088 Modbus Gateway that was published February 5, 2019, on the NCCIC/ICS-CERT website. This advisory provides mitigation recommendations for improper authentication, missing authentication for critical function, and improper input validation vulnerabilities reported in the Kunbus PR100088 Modbus ...
January 2019
31.01.2019
US CERT (ICS)
IDenticard PremiSys
Title
IDenticard PremiSys
Published
Jan. 31, 2019, 4 p.m.
URL
https://ics-cert.us-cert.gov/advisories/ICSA-19-031-02
Summary
This advisory provides mitigation recommendations for use of hard-coded credentials, use of hard-coded password, and inadequate encryption strength vulnerabilities reported in the IDenticard PremiSys access control system.
31.01.2019
US CERT (ICS)
Schneider Electric EVLink Parking
Title
Schneider Electric EVLink Parking
Published
Jan. 31, 2019, 3:55 p.m.
URL
https://ics-cert.us-cert.gov/advisories/ICSA-19-031-01
Summary
This advisory provides mitigation recommendations for use of hard-coded credentials, code injection, and SQL injection vulnerabilities reported in Schneider Electric’s EVLink Parking, an electric vehicle charging station.
29.01.2019
US CERT (ICS)
Stryker Medical Beds
Title
Stryker Medical Beds
Published
Jan. 29, 2019, 4:20 p.m.
URL
https://ics-cert.us-cert.gov/advisories/ICSMA-19-029-01
Summary
This medical device advisory provides mitigation recommendations for a reusing a nonce vulnerability in Stryker's medical beds.
29.01.2019
US CERT (ICS)
BD FACSLyric
Title
BD FACSLyric
Published
Jan. 29, 2019, 4:15 p.m.
URL
https://ics-cert.us-cert.gov/advisories/ICSMA-19-029-02
Summary
This medical device advisory provides mitigation recommendations for an improper access control vulnerability reported in BD's FACSLyric flow cytometry solution.

Last Updates

BOSCH PSIRT
31.10.2024
SIEMENS CERT
22.11.2024
US CERT
08.11.2024
US CERT (ICS)
21.11.2024

By Source

Archive

2024
2023
2022
2021
2020
2019
2018
2017

Feeds